Yicheng New Materials Co., Ltd. manufactures custom foam board, partition board, composite floor slab and cabinet board in PVC and WPC polymer composites, alongside our PVC, WPC, SPC, UV and PU interior panel families. Based in Haining, Zhejiang Province, we have produced interior and decorative building materials since 1998 in a 30,000 m² facility with 30+ production lines, exporting primarily to Latin America, Africa and Europe for distributors, importers, contractors and project partners.
Custom Other Products OEM/ODM: Where the Range Fits
This category collects the panel products that sit outside a single interior finishing system: structural-decorative boards, load-bearing composite slabs and machinable foam substrates. Each is extruded from a PVC or WPC polymer composite using celuka foaming or co-extrusion, so the same raw-material discipline and surface lamination capability that run through our Products range also apply here.
Projects reach this range when a brief needs a board that carries load, divides space or takes CNC and print work rather than simply lining a wall. We supply it as a Custom Other Products OEM/ODM Suppliers, Factory, Company working to your drawing, sample or market reference.
Our Available Range
| Product |
Substrate |
Application Fit |
Key Configuration Points |
| Foam Board |
PVC / WPC celuka foam, dense skin with closed-cell core |
Advertising, furniture substrate, display counters, humid-area fit-out |
Thickness, density, skin finish for UV print or lamination |
| Partition Board |
PVC / WPC celuka foam composite panel |
Bathroom dry-zone dividers, balcony separation, hotel and homestay room partitions |
Wood-grain, stone-grain or solid-colour lamination; cut-outs for doors and cabling |
| Composite Floor Slab |
WPC or PVC reinforced composite, co-extruded |
Attic intermediate floors, mezzanine platforms, prefabricated building floors, equipment platforms |
Slab thickness, joist spacing, optional anti-slip wear layer |
| Cabinet Board |
PVC foam substrate |
Bathroom furniture bases, cabinet carcasses, wet-room joinery |
Board size, face lamination, edge treatment |
Where a brief crosses into finishing panels, our Wall Panel range and PVC Ceiling range cover the wall and soffit side of the same project.
Application Fit by Product Type
Foam Board and Cabinet Board
Celuka foam board gives a hard, dense skin over a fine closed-cell core, so it machines cleanly and holds a screw without the tear-out common in particleboard. The low weight reduces transport cost and handling load at height, and near-zero water absorption makes it suitable for kitchens, bathrooms and humid retail interiors where MDF would swell.
- Sawing, drilling, CNC carving, thermal bending, UV printing and lamination are all feasible.
- Dedicated PVC glue or neutral MS adhesive for bonding; strong-solvent adhesives should be avoided.
- Pre-drill before screw fastening to reduce edge cracking.
- Primer treatment before painting improves adhesion.
Partition Board
One-piece extruded partition board combines structural rigidity with a finished face, so a divider can be installed and left without secondary cladding. Closed-cell construction keeps water absorption low, and the inherent flame-retardant substrate is available in indoor grades; the fire rating quoted for a project is taken from the applicable test report rather than assumed.
Composite Floor Slab
The slab is a load-bearing panel for raised floors, attic decks and mezzanine platforms. It is laid across a steel or timber joist frame and fixed with anti-rust countersunk screws. Bending strength and dimensional stability under humidity and temperature cycling are the two properties that decide usable span, so joist spacing is specified together with slab thickness rather than separately.
Customization We Run In-House
Custom work on this range follows the same six-step route as our panel families: requirement confirmation, sample development, sample approval, bulk production, finished-goods inspection, then export packing and shipment. Colour matching works from swatches or reference images, and colour reproduction reaches more than 95% of the Pantone range on our colour-customized lines.
- Specification: thickness, board size and cut-to-length formats beyond standard stock sizes.
- Surface: matte, high-gloss, transfer printing or lamination; wood-grain, stone-grain or solid colour.
- Pattern: high-definition digital printing for corporate graphics or proprietary décors, with texture held consistent across batches.
- Material tuning: fire resistance, wear resistance and antibacterial properties adjusted to the application.
- Branding: OEM/ODM packaging, printed cartons, catalogues and marketing assets for your own label.
Quality Control and Acceptance
Incoming resin, additives and decorative films are inspected for environmental grade and physical strength before release to production. In-process patrol sampling monitors dimensions, surface condition and colour, and a finished-goods inspection runs before packing.
| Stage |
What We Check |
| Raw material |
Environmental grade, physical strength of resin and film |
| In-production |
Process parameters, surface condition, early deviation correction |
| Finished goods |
Bending test, impact resistance, hardness, wear resistance, dimensions |
| Batch comparison |
Archived first-batch sample compared item-by-item on appearance, colour and texture |
| Weather performance |
Waterproof, moisture-proof, flame retardancy, anti-aging, corrosion resistance |
Inspection reports and photographs can be issued with a shipment when a project requires documented acceptance. Retained first-batch samples give a project a physical reference for every later delivery.
Installation, Handling and Maintenance
- Store boards flat on a dry, level surface; keep edges protected in transit.
- Leave expansion gaps between adjacent boards and fill joints with anti-mildew sealant in wet zones.
- Keep drill and groove positions away from panel edges to reduce chipping.
- Partition board suits bathroom dry zones; avoid permanent direct shower splash.
- Composite floor slab must sit on a properly spaced joist frame with no excessive unsupported span.
- Clean finished faces with a damp cloth and neutral detergent; avoid abrasive pads on printed or laminated surfaces.
Information We Use to Configure Your Solution
A workable configuration and quotation comes from the working brief rather than a catalogue number. The following inputs let us lock the substrate, surface and packing before sampling.
- Product type and the application area it serves.
- Board dimensions, thickness and required tolerance.
- Load requirement and joist spacing for floor slab applications.
- Surface finish, colour reference or pattern artwork.
- Fire, wear or antibacterial performance required, with the applicable standard.
- Order quantity, packing format and carton printing.
- Destination market and any labelling or documentation requirements.
- Target delivery window and shipping mode.
We quote against a confirmed sample wherever appearance or colour is critical, and the approved sample becomes the production standard for bulk goods.
Supply, Capacity and Delivery Scope
Our Haining facility runs 30+ production lines with annual exports of 1,500+ 40HQ containers, which supports both first orders and repeat distributor programmes. Orders ship in export-standard packing with shipping documents; custom cartons, inserts and brand labels are produced as part of the OEM/ODM scope.
Marketing support is included for distributors launching a private label: product photography, video, catalogues, specification sheets and editable sales assets. Samples are available for quality and market evaluation, with international freight payable by the customer and consolidation arranged on request.
Frequently Asked Questions
Can we order these products under our own brand?
Yes. We run OEM/ODM programmes across the range, covering custom colours, printed packaging, brand labelling and marketing materials, so the product reaches your market under your own identity.
Can people stand directly on the composite floor slab?
The slab is load-bearing only when supported by a properly designed joist frame. Unsupported span must stay within the designed joist spacing; we confirm slab thickness against the span and load you specify.
Is the partition board suitable for a shower area?
Partition board is intended for bathroom dry zones. For wet areas, joints should be sealed with anti-mildew sealant and direct permanent shower splash avoided.
Can the boards be cut and machined on site?
Foam board, partition board and composite slab can all be sawn, drilled and screwed with standard woodworking tools. Pre-drilling and countersunk anti-rust screws protect the face and edges.
What fire performance can be supplied?
Indoor flame-retardant substrates are available, and material performance can be tuned against the standard required by your project. The quoted fire rating is taken from the applicable test report for the selected construction.
How do we start a custom order?
Send the product type, dimensions, load or performance requirement, surface reference, quantity and destination market. We develop a sample to those inputs; once approved, it becomes the standard for bulk production and shipment inspection.