Yicheng New Materials Co., Ltd. manufactures 3D-ceramic self-adhesive wall stickers at our 30,000 m² facility in Haining, Jiaxing, Zhejiang Province. Since 1998 we have produced interior and decorative building materials, and this wall sticker family extends that range into lightweight, rollable surface renovation for distributors, importers, contractors and project partners across Latin America, Africa and Europe.
The range is built around a flexible polymer composite substrate with a high-definition printed surface and a wear-resistant laminated film. Panels are supplied in 1.2 × 3 m rolls, with flexible clay, grille and marble textures available as standard decorative directions. We produce this series as a 3D-Ceramic Self -adhesive Wall sticker, supplying both standard and OEM/ODM programs.
What We Manufacture in This Category
As a Custom 3D-Ceramic Self -adhesive Wall sticker OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
Our 3D-ceramic self-adhesive wall stickers are a roll-format decorative surface rather than a rigid tile. The substrate is a flexible polymer composite with a lightweight modified material layer, which allows the product to be rolled for storage and transport and to follow minor surface movement without cracking or deforming.
Flexible clay texture Soft, matte surface for feature walls and quiet interior settings.
Grille texture Linear slat appearance for entrances, offices and shop interiors.
Marble texture High-definition stone graphics for living rooms, hotel walls and upgrades.
Standard roll size is 1.2 × 3 m. Our current production includes Pure White Texture, Beige Sandstone, Light Gray Marble and Medium Gray Wavy Pattern finishes in this format. The printed surface is laminated with a wear-resistant film and is moisture-proof, stain-proof and scrub-resistant, so wall areas in kitchens, bathrooms and other humid rooms can be wiped clean in normal use.
Application Fit Across the Wall Sticker Family
This category sits within the broader wall sticker and flexible surface program we produce. Each adjacent type addresses a different installation condition, so a project can combine them without changing adhesive systems or visual language.
| Product type |
Typical format |
Where it fits |
| 3D-ceramic self-adhesive wall sticker |
1.2 × 3 m roll |
Feature walls, entrances, living rooms, bedrooms, kitchen and bathroom walls, shops, offices, rental units and old-house renovation |
| Grid wall sticker |
Roll |
Regular geometric patterns for corridors and repeat wall sections |
| Marble wall sticker |
Roll |
Stone-effect walls where weight and cutting are a concern |
| Fabric wall sticker |
Roll |
Soft textile appearance for bedrooms and hospitality interiors |
| Vinyl floor sticker |
Roll |
Floor refreshment where a removable decorative layer is preferred |
For larger wall systems, our range also includes Wall Panel and PVC Wall Panel products that pair well with sticker finishes on adjacent surfaces in the same commercial or residential project.
Materials, Surface and Performance
The material combination is central to how the product performs on site. A flexible polymer composite substrate carries the printed layer; a protective film locks in the graphic and provides the cleanable surface. Good flexibility, tensile strength and tear resistance allow the roll to be handled, cut and repositioned during installation without the edges splitting.
- Moisture-proof: suitable for kitchen and bathroom wall surfaces where normal cleaning is expected.
- Stain-proof and scrub-resistant: everyday marks can be wiped from the laminated face.
- Lightweight: rolls are easier to transport, store and move through finished buildings than rigid panels.
- 3D texture: high-definition printing reproduces depth and shading across the surface.
Surface condition determines the final appearance. Smooth, dry, dust-free and structurally sound walls give the best bond; fresh plaster should be fully cured before application. Our technical documentation explains substrate preparation alongside roll handling so installation teams can plan wall by wall.
OEM/ODM Configuration Options
We build custom programs around the market a partner serves, not around a fixed catalogue. The customization process starts with requirement confirmation covering panel type, size, surface finish, target color, quantity and application scenario, then moves through sample development, sample approval and bulk production. Approved samples become the production standard for the order and are retained for later batch comparison.
Configuration dimensions we discuss with partners
- Texture direction — clay, grille, marble, stone or custom pattern
- Color matching from Pantone references, physical swatches or reference images
- Roll length and width within the 1.2 × 3 m format
- Surface film finish and printed graphic development
- Retail packaging, private-label cartons and printed inserts
- Marketing assets for launch, including product photography and specification sheets
Color customization can reproduce most of the Pantone spectrum, and pattern customization uses high-definition digital printing for wood grains, stone graphics and corporate branding. Because a wall sticker is installed in long runs, the printed pattern must remain continuous across adjacent rolls; our production control addresses batch-to-batch appearance and texture comparison.
Capacity, Quality Control and Batch Consistency
Our 30+ production lines and annual export volume of more than 1,500 40HQ containers support both growing distributors and established importers. Wall sticker production is integrated into the same quality system used across our decorative panel lines, with inspection from incoming raw materials through finished goods.
| Stage |
What is checked |
| Incoming material |
Resin, additives and decorative surface film against environmental and physical indicators |
| In-production patrol |
Process parameters, printed surface and color deviation during the run |
| Finished product |
Bending, impact, hardness, wear resistance and dimensional checks |
| Batch comparison |
Each batch compared with the retained first-batch sample for appearance, color and texture |
| Weather resistance |
Waterproof, moisture-proof, flame retardancy, anti-aging and corrosion resistance |
Where a project requires a specific test report for acceptance, we confirm the applicable test item and the report format before production so the documentation matches what the site or importer needs.
Installation, Packaging and Delivery Scope
Rolls are supplied ready for direct application to prepared walls, with no wet trade and no complex construction needed. Installation is a sequence of surface preparation, measurement, cutting, liner removal and pressing from the centre outward. On large commercial walls, plan the roll layout so pattern joints fall on corners or inconspicuous lines.
- Packaging: export-standard cartons and protective wrapping suitable for container loading.
- Branding: private-label cartons, printed inserts and product labels.
- Documentation: product specification sheets, installation guidance and marketing images.
- Delivery: shipping documents issued with each order.
Information We Use to Configure Your Solution
A quotation for this category is prepared from the working conditions of the project, not from a single price per roll. The following inputs let us recommend the right substrate, texture and packaging and prepare a specification that can be checked on arrival.
| Input |
Why it matters |
| Application area and substrate |
Determines texture direction and surface preparation guidance |
| Roll size, quantity and order pattern |
Drives production planning and container loading |
| Color references and texture samples |
Sets the approved sample that governs bulk inspection |
| Packaging and branding requirements |
Defines carton structure and label content for your market |
| Target market and compliance needs |
Identifies the test reports and documentation to issue with the order |
Share these details through the contact channel on our site and we will prepare a configuration and quotation that reflects the actual scope. For partners building a broader decorative range, our Products listing shows how the wall sticker program fits alongside PVC ceiling, wall panel and flooring lines.
Frequently Asked Questions
What sizes does the 3D-ceramic self-adhesive wall sticker come in?
Standard production is 1.2 × 3 m per roll. For OEM/ODM orders we discuss roll dimensions within the format during requirement confirmation so the finished roll matches the wall heights and retail pack you plan to sell.
Can you match a specific color or pattern from our market?
Yes. We match from Pantone references, physical color swatches or reference images and produce a pre-production sample for approval. Approved samples become the bulk standard, and first-batch samples are retained for comparison on later runs.
Is the product suitable for bathrooms and kitchens?
The laminated surface is moisture-proof, stain-proof and scrub-resistant, which suits kitchen and bathroom walls under normal cleaning. As with any adhesive product, the wall must be dry, clean and sound before application, and fresh plaster needs full curing.
Do you offer private-label packaging and marketing materials?
We support private-label cartons, inserts and product labels as part of OEM/ODM programs. Product photography, specification sheets and marketing images can be prepared so your sales team has launch material ready when the container arrives.
How is quality checked before shipment?
Incoming film and resin are inspected, production is patrolled for surface and color deviation, and finished rolls are checked for dimensions, surface quality and consistency against the approved sample. Inspection photos or reports can be provided with the order.