Yicheng New Materials Co., Ltd. manufactures PVC Square Tube profiles for interior and exterior decorative work. Our range covers hollow rigid PVC sections in single-port, double-port and four-port formats, supplied as stock profiles or built to your drawing, color and packaging requirements.
Production runs in Haining, Jiaxing, Zhejiang, where we have operated since 1998 with a 30,000 m² facility and more than 30 production lines. Distributors, importers, contractors and project partners in Latin America, Africa and Europe buy these profiles for ceilings, partitions, grilles, feature walls, furniture frames and service enclosures.
What We Manufacture in This Range
Every PVC square tube we supply is extruded from rigid PVC compound into a hollow section with a uniform wall thickness and a calibrated outer dimension. The profile is built for straight runs and repetitive joints, so the sections stay stable when cut, spliced and fixed with clips.
The range is organised by port configuration and section size. Ports let the profile carry cables, accept connectors or form repeated grille patterns, and the section size sets the visual weight and spanning capability of the finished assembly.
| Product |
Section |
Typical Use |
| Single Port PVC Square Tube |
50 × 50 mm |
Grille bars, simple frames, edge trims |
| Double Port PVC Square Tube |
50 × 75 mm |
Partitions, curtain-wall battens, panelling supports |
| Double Port PVC Square Tube |
50 × 100 mm |
Feature walls, deeper reveals, furniture frames |
| Four Port PVC Square Tube |
50 × 50 mm |
Conduit runs, cable routing, multi-channel assemblies |
Where the Profiles Fit in a Project
PVC square tube is specified where a light, moisture-resistant section is needed instead of metal. Typical applications include indoor and outdoor ceilings, partitions, curtain walls, decorative grilles, feature walls, furniture frames, electrical conduits and garden supports.
- Ceilings and soffits: repeated bars over PVC ceiling panels for linear rhythm and shadow lines.
- Feature walls and partitions: vertical or horizontal frames combined with wall panel boards in the same finish family.
- Service enclosures: cabling carried inside the ports where local code permits, with conduit occupied by insulated low-voltage wiring only.
- Exterior decorative work: hollow sections in sheltered positions, avoiding trapped water by detailing drainage or sealing at exposed ends.
Material Behaviour and Surface Options
Rigid PVC brings water resistance, corrosion resistance and electrical insulation to the section, and the compound is formulated to be flame retardant and self-extinguishing. The profile keeps a smooth surface and stable dimensions, which limits deformation and cracking over the life of the installation.
Surfaces are finished in wood grain, solid color or heat-transfer decoration. The finish choice drives the visual match with panels, trims and joinery, so we confirm the reference early in the project.
- Color: matched from a swatch, reference image or Pantone reference, with reproduction checked across batches.
- Finish: matte, gloss, lamination or transfer print, applied consistently along the length of each profile.
- Section: standard 50 × 50, 50 × 75 and 50 × 100 mm, or a custom port layout and dimension within extrusion limits.
- Cutting and machining: profiles can be cut, spliced and fixed with clips without complex tools; we agree cut lengths and end finishing where required.
Critical Specifications We Confirm Before Production
A square tube only fits its frame when the outside dimension, wall thickness and straightness are agreed before the tooling or the batch is fixed. These are the values we lock into the specification:
| Parameter |
What It Controls |
| Outside dimension |
Fit against clips, trims and adjacent panels |
| Wall thickness |
Stiffness, screw holding, weight per metre |
| Port layout |
Cable capacity, connector fit, visual pattern |
| Straightness and length tolerance |
Clean joints over long runs |
| Color and surface consistency |
Match with panels, trims and repeat orders |
OEM/ODM Development and Customization
Custom work follows a defined sequence: requirement confirmation, sample development, sample approval, bulk production, inspection and packing. Customers provide a drawing, a reference sample or an image, and we develop the profile against it.
- Custom color matching from swatches or Pantone references.
- Size, wall thickness and port configuration adjustments.
- Custom packaging, private-label cartons and printed marketing materials for your brand.
- Sample consolidation and freight coordination for multi-item orders.
Flexible production lines support both small-batch, multi-variety work and high-volume programmes. Annual exports of more than 1,500 40HQ containers underline the volume we can carry alongside custom runs.
Installation, Fixing and Site Handling
Profiles are cut on site to the measured run, spliced at joints and fixed with clips or mechanical fasteners. Because the section is hollow, fasteners must be positioned where the wall thickness provides holding, and long runs need intermediate support to control deflection.
- Confirm substrate type and anchor spacing before drilling.
- Allow expansion gaps at long runs and at transitions between interior and exterior zones.
- Seal or cap open ends in exposed exterior positions to stop water ingress.
- Keep profiles on a flat, supported surface and out of direct sun before installation.
Quality Control and Acceptance
Incoming resin, additives and decorative films are inspected on arrival. Production runs with in-process patrol checks on dimensions and surface condition, followed by finished-goods inspection before packing.
We retain a first-batch sample for each item and compare later batches against it on appearance, color and texture. Finished products are checked for waterproofing, flame retardancy, anti-aging and corrosion resistance, and bending, impact, hardness and dimensional tests are part of the pre-delivery procedure.
- Inspection reports and inspection photos can be provided on request.
- Batch comparison against the approved first-batch sample.
- Export-standard packing with shipping documents issued for each order.
Information We Use to Configure Your Solution
A precise proposal depends on the working details below. When these are settled, we can confirm section, finish, packing and the production route in one reply.
| Input |
Detail Needed |
| Application |
Ceiling, partition, grille, frame, conduit or exterior position |
| Section |
Port configuration, outside dimension, wall thickness, length |
| Appearance |
Color reference, finish type, matching panels or trims |
| Quantity |
First order volume, repeat schedule, mixed-item structure |
| Packing and brand |
Carton format, labels, private-label artwork, marketing materials |
| Destination |
Market, shipping mode, documentation requirements |
The same manufacturing platform supplies PVC profile accessories that complete the installation, so trims and square tube can be ordered together in one finish.
Maintenance, Spare Profiles and Documentation
PVC square tube needs no painting or sealing. Cleaning with a damp cloth and a mild household detergent keeps the surface in good condition, and abrasive pads should be avoided on decorated faces.
- Store spare lengths from the same batch for later repairs and extensions.
- Record the approved sample reference so repeat orders stay consistent.
- Keep a small stock of clips and matching trims with the installed profiles.
Questions From Project Teams
Can we order a section size that is not in the standard list?
Yes. We develop custom port layouts, outside dimensions, wall thicknesses and lengths from a drawing or reference sample, and confirm the agreed values in a pre-production sample before bulk manufacture.
How is the color matched to our existing panels?
We match from a physical swatch, a reference picture or a Pantone reference, and check reproduction across batches. Approving a sample first is the most reliable way to bring the square tube into the same visual family as your ceiling or wall panels.
Are the profiles suitable for exterior ceilings?
The compound is water-resistant, corrosion-resistant and flame retardant, and finished products are tested for anti-aging performance. For exterior use, we recommend sheltered positions, sealed or capped ends and detailing that prevents water from collecting inside the hollow section.
Can the square tube be used to route cables?
Multi-port profiles in 50 × 50 mm and the 50 × 75 and 50 × 100 mm double-port sections provide internal channels for cable routing where local electrical rules allow. Containment is normally limited to insulated low-voltage wiring, with the installation method confirmed by the project's electrical designer.
What does a private-label order include?
OEM/ODM orders cover custom color, custom packaging and carton artwork, labels and marketing materials such as product photos, catalogues and specification sheets, produced around your market and brand rather than a generic range.