Yicheng New Materials Co., Ltd. manufactures PVC Profile for interior and decorative finishing. The range covers edge-trim profiles, I-shaped sections, skirting trims, corner mouldings and film-wrapped line profiles supplied to distributors, importers, contractors and project partners from our base in Haining, Jiaxing, Zhejiang Province.
Drawing on production experience dating back to 1998, a 30,000 m² facility and more than 30 production lines, we build these profiles as accessories to our panel systems and as independent OEM/ODM items. Annual exports of 1,500+ 40HQ containers support distributors and project partners in Latin America, Africa and Europe.
Our PVC Profile Range
The range is organised by profile geometry, weight and surface treatment, so a single order can match ceiling panel edges, wall panel joints, skirting lines and door or window casings. Each item is produced to a declared section size and linear weight, giving specifiers a repeatable basis for trim ordering.
| Profile Type |
Section / Weight |
Typical Application |
| PVC I-Shaped Profile |
Height 0.9 cm, 120 g/m |
Panel joint cover, ceiling and wall seams |
| Hot Stamped Silver Corner Profile |
0.85 × 0.85 cm, 90 g/m |
Corner trim with metallic accent |
| Film Wrapped Corner Trim |
0.9 × 0.9 cm, 135 g/m |
Wall panel corners, matching film finishes |
| PVC Skirting Board Trim |
Height 1.0 cm, 140 g/m |
Edge finishing at floor and wall junctions |
Where These Profiles Fit
PVC profiles close the interface between decorative panels and the building fabric. They are specified for ceiling edge trimming, wall decoration joints, door and window casings, background wall borders, cabinet edge trimming and skirting runs in residences, hotels, office buildings, exhibition halls and villas.
- Pairing with PVC Ceiling systems for perimeter and joint finishing.
- Matching PVC Wall Panel installations across joints, corners and terminations.
- Coordinating with film-wrapped panels, soft porcelain and wood-grain aluminium alloy profiles for a continuous decorative line.
Because the profiles are extruded from polyvinyl chloride, they remain light, flexible and resistant to moisture, moths and ageing compared with timber mouldings, and are more impact-resistant than gypsum trims. Installation can be by direct bonding or nailing without complex substrate preparation, which suits fast refurbishment and volume fit-out programmes.
Surface Finishes and Colour Matching
Surfaces can be supplied in wood grain, stone grain, solid colour and imitation metal effects. Film wrapping and hot-stamp foil are used where the trim must follow the decorative face of a panel, including metallic silver corner accents.
Colour matching
Reference swatches or images guide colour development; approved samples become the production standard.
Surface options
Wood grain, stone grain, solid colour, imitation metal, hot-stamp and film-wrapped finishes.
Batch consistency
First-batch samples are retained and later batches compared on appearance, colour and texture.
Specifications That Define a Profile
A usable profile specification is built from a small set of measurable values. We quote against these directly so that the supplied trim meets the panel system it is intended to finish.
- Section geometry — height, width and wall thickness of the profile.
- Linear weight — grams per metre, as listed for each item in the range.
- Length — cut length per piece and tolerance.
- Surface treatment — film wrap, hot stamp, lamination or plain extrusion.
- Colour reference — swatch, panel sample or image to be matched.
- Packing — bundle count, protection and carton or shrink format.
OEM/ODM Configuration Approach
Custom profiles are developed from the customers requirement through sample, confirmation and bulk production. We work from a drawing, a reference sample or a panel the trim must match, then fix the section, colour and packing before mass production begins.
- Requirement confirmation — profile type, section, surface, colour, quantity and end use.
- Sample development — pre-production samples against the agreed specification.
- Sample confirmation — approved sample becomes the production standard.
- Bulk production — dimensions, surface effect and colour consistency checked on line.
- Final inspection — full-range checks before packing.
- Export packing and shipping documents.
Quality Control and Acceptance
Profiles pass through in-plant inspection from raw material to finished goods. Resin and additive batches are checked on arrival, production is patrol-sampled, and finished goods are inspected before delivery. First-batch samples are archived for comparison against every later lot.
- Dimensional check on section size and cut length.
- Surface inspection for colour, texture and foil or film adhesion.
- Bend and impact resistance as part of the finish-product procedure.
- Batch comparison against retained first-batch samples.
Inspection reports and photos are available with finished goods so that receiving teams can verify the delivery against the approved sample and purchase specification.
Packing, Delivery and Documentation
Export-standard packing protects surface finishes during container transport. Bundles are counted and labelled to the agreed format, and shipping documents accompany each shipment. Our service supports sampling, custom colours and packaging, and marketing materials for partners bringing the range to market.
Information We Use to Configure Your Solution
A precise brief lets us confirm the section, surface and packing without repeated samples. The following inputs are the working basis for a configuration and quotation.
| Input |
Why It Matters |
| Profile drawing or reference sample |
Defines section geometry and edge detail |
| Panel or surface to be matched |
Aligns colour, grain and gloss with the finished system |
| Application and installation method |
Bonding or nailing affects section and substrate contact |
| Quantity and target market |
Sets production run and packing format |
| Packing and branding requirements |
Supports OEM/ODM presentation at destination |
Frequently Asked Questions
What is the minimum basis for a custom profile quotation?
We need the profile type or drawing, the panel or surface it must match, the application, estimated quantity and target packing. With those inputs we can confirm the section and surface treatment and prepare a quotation.
Can the profiles match our own panel colours?
Yes. Colour development begins from a swatch, panel sample or reference image. The approved sample becomes the standard for bulk production, and we retain first-batch samples for comparison against later lots.
Which finishes are available on PVC profiles?
Wood grain, stone grain, solid colour and imitation metal finishes are available, including film-wrapped and hot-stamped corner trims. Surface choice is agreed at sample stage together with the section.
How are profiles packed for export?
Profiles are packed to export standard in counted bundles with surface protection, labelled to the agreed format, and shipped with the accompanying documents. Custom packaging and branding are supported for OEM/ODM orders.
Are samples provided before bulk production?
Yes. Pre-production samples are produced against the confirmed specification and submitted for approval. Once appearance, colour and quality are approved, that sample governs the bulk order.
Explore the full PVC Decorative Panels, Interior Decorative Materials range or contact our team with your profile drawing and panel reference to start a custom configuration.