Yicheng New Materials Co., Ltd. manufactures PVC Ceiling - 18cm profiles as part of a broader ceiling system for interior renovation and commercial fit-out. The 18cm family covers two panel constructions: a 180 × 68mm six-pocket profile at 6.8mm and a 180mm panel at 8mm with a stated 2.8kg/m² area weight. We produce these panels on automatic lines in Haining, Zhejiang, and supply them to distributors, importers, contractors and project partners in Latin America, Africa and Europe.
Our Role in the PVC Ceiling Category
As a Custom PVC Ceiling - 18cm OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
Since 1998 we have concentrated on interior and decorative building materials. Our 30,000 m² facility and 30+ production lines allow us to run repeat ceiling profiles for stock programmes and to switch surface finish, color and packing for branded ranges. Annual export volume is above 1,500 40HQ containers, which keeps our planning discipline close to container logistics rather than single-order production.
For the 18cm ceiling, the work starts before extrusion: we match the profile, face treatment and panel weight to the ceiling span, the fixing method and the visual target of the room. Sales, engineering and quality teams then carry the approved sample through production and container loading.
The 18cm Ceiling Range at a Glance
| Product |
Profile / Thickness |
Key Data |
Typical Fit |
| 6.8mm PVC Ceiling 180 × 68mm |
Six-pocket hollow profile, 6.8mm face |
Lower panel weight, efficient coverage per container |
Residential ceilings, rental apartments, volume distributor stock |
| 8mm PVC Ceiling 180mm |
8mm face, 180mm working width |
2.8kg/m², stiffer face for wider support spacing |
Commercial ceilings, hotels, offices, higher-traffic interiors |
Both panels share the 180mm module, so a project can specify one ceiling line across a building and adjust the construction by zone. Other widths in our ceiling family, from PVC Ceiling to PVC Ceiling - 25cm and PVC Ceiling - 60cm, allow ceiling and wall layouts to be combined under one finish specification.
Where 18cm Ceiling Panels Fit
The 18cm module gives a fine, repeating line that reads well on lower ceilings and in corridors, bathrooms, kitchens and service areas. The hollow profile keeps handling weight manageable for installers working overhead, while the tongue-and-groove edge allows panels to be fixed board by board without wet trades.
- Residential renovation: apartment ceilings, bathrooms, kitchens and utility rooms where a washable, low-maintenance surface is preferred.
- Hospitality and commercial: hotel guest rooms, back-of-house corridors and offices using the 8mm construction for a firmer face.
- Distributor programmes: stock ranges built around one 18cm profile with several woodgrain, marble and solid-color faces.
- Wall and ceiling combinations: matching 18cm ceilings with PVC Wall Panel profiles in the same décor for a coordinated interior package.
Materials, Face Options and Specifications
Panels are extruded from PVC compound and finished with a decorative surface film or coating. The face treatment drives appearance and cleaning behavior, so we confirm it against the room type rather than treating it as a color-only choice.
- Matte finish: low sheen for residential ceilings and concealed lighting layouts.
- High-gloss finish: brighter reflectance for bathrooms and compact interiors.
- Transfer printing: woodgrain and stone effects with repeatable pattern alignment along the panel length.
- Lamination: film-faced surfaces for color consistency across large ceiling areas.
Specification conversations center on panel width and thickness, area weight, profile geometry, face treatment, color reference, panel length and the trims that close edges and junctions. We confirm these values against the approved sample before mass production begins.
Installation and System Components
The 18cm ceiling is installed as a fixed or demountable panel system depending on the substructure chosen for the project. Panels are cut to the room module, fixed to battens or framing, and finished with edge trims at perimeters and openings.
- Confirm the support spacing against the panel construction; the 8mm profile offers more face stiffness where framing cannot be closely spaced.
- Allow an expansion gap at perimeters and around columns to avoid stress at butt joints.
- Use matching PVC or aluminum profiles for cornices, angles, baseboards and edge closure.
- Keep panels in the room before fixing so they adapt to site temperature and humidity.
We supply the ceiling panels together with the profile range so a container can carry the full ceiling package. Detailing around light fittings, access hatches and ventilation grilles is agreed at order stage and reflected in the cutting and packing plan.
OEM/ODM Customization
Custom work for the 18cm ceiling follows a defined path: requirement confirmation, sample development, sample approval, bulk production, inspection and export packing. Approved samples become the production standard for the order. We support:
- Color matching from swatches or reference panels, with custom color development across the range.
- Surface finish selection across matte, high-gloss, transfer printing and lamination.
- Panel length, cutting and packing arrangements suited to the destination market.
- Private-label packaging and marketing materials for distributor brands.
Where a project requires specific fire, wear or antibacterial performance, the material formulation is discussed against the target application and the evidence required by the project. We confirm the achievable specification in writing before sampling.
Quality Control and Acceptance
Our quality system runs from incoming resin and film inspection through in-production patrol checks to finished-goods inspection. For ceiling panels, the checks that matter most are face appearance, color consistency, dimensional accuracy, profile straightness and bending resistance.
- Incoming materials: resin, additives and decorative films checked on arrival.
- In-process: random sampling of process parameters and surface condition during production.
- Finished goods: bending, impact, hardness, wear and dimensional checks before packing.
- Batch control: first-batch samples retained and compared against subsequent production for appearance, color and texture.
Inspection reports and inspection photos can be provided with the shipment. Pre-shipment checks are arranged against the approved sample and the agreed packing specification.
Information We Use to Configure Your Solution
| Project Input |
What It Determines |
| Application and room type |
Panel construction, face finish and cleaning requirements |
| Ceiling area and layout |
Panel quantity, length plan and trim quantities |
| Substructure and support spacing |
6.8mm or 8mm construction and fixing detail |
| Color and surface reference |
Color matching route and sample approval |
| Packing and labeling |
Export carton or bundle format and container loading plan |
| Delivery schedule |
Production slot and shipping window |
Frequently Asked Questions
What is the difference between the 6.8mm and 8mm 18cm ceiling panels?
The 6.8mm panel is a 180 × 68mm six-pocket profile with a lighter face, suited to residential ceilings and volume stock. The 8mm panel at 2.8kg/m² has a stiffer face for commercial and hospitality ceilings or where support spacing is wider.
Can you produce the 18cm ceiling in our own brand and color?
Yes. We develop colors from swatches or reference panels and produce OEM/ODM orders with custom finishes, lengths, private-label packaging and marketing materials. The approved sample is retained as the production standard for subsequent batches.
Which trims should be ordered with the panels?
Perimeters, corners and junctions need matching edge profiles, cornices or angles. We quote the ceiling panels together with the profile accessories so the container carries a complete ceiling package and installers are not left sourcing trims locally.
How is quality checked before shipment?
Finished panels are checked for appearance, color consistency, dimensions and bending resistance against the retained first-batch sample. Inspection reports and photos can accompany the shipment, and packing is checked against the agreed export specification.
What should we send to receive a quotation?
Send the ceiling area or quantity, application, preferred thickness, color or surface reference, panel length, trim requirements, packing and labeling instructions, and the required delivery window. With those inputs we prepare a configuration and quotation for the 18cm ceiling line.