Yicheng New Materials Co., Ltd. Offfer Custom OEM/ODM Aluminum Alloy Profile Line as part of our Accessories range, alongside PVC profiles, angle mouldings and baseboards. The range is built for projects where the edge detail carries as much visual weight as the panel or cladding it trims: ceiling perimeters, wall transitions, glass curtain wall edges, furniture frames and exhibition structures.
Our profile lines are made from 6063 series aluminum alloy through extrusion, precision processing and surface treatment. They bring metal rigidity and toughness together with corrosion, rust and aging resistance, so the same trim detail can serve controlled interior lines and more exposed exterior edges.
Our Aluminum Alloy Profile Line Range
We supply corner mouldings and trim profiles that support OEM/ODM specification work. The range below reflects the sizes configured in our standard catalogue; sections, lengths and finishes outside it are developed against project drawings and samples rather than taken from a fixed list.
| Profile Item |
Section |
Typical Application |
Mounting Approach |
| Aluminum Alloy Corner Molding |
7×7×1 mm |
Slim wall and panel joints in compact interiors |
Bonded or clipped |
| Aluminum Alloy Corner Molding |
15×15×1 mm |
Wall panel corners, cabinet and furniture edges |
Bonded or nailed |
| Aluminum Alloy Corner Molding |
20×30×1 mm |
Rectangular wall modelling and cased openings |
Bonded, buckled or nailed |
| Aluminum Alloy Corner Molding |
40×40×0.8 mm |
Ceiling perimeters, large-format wall and curtain wall edges |
Bonded, buckled or nailed |
Where the Range Fits
The profiles work across residential, hotel, office, exhibition and commercial interiors, and the material's corrosion and aging resistance extends their use to humid or exposed outdoor positions. Larger sections such as 40×40×0.8 mm suit the visual weight of ceiling perimeters and curtain wall edges; narrow 7×7×1 mm and 15×15×1 mm sections keep wall joints and furniture detailing discreet.
- Ceiling edge trimming and perimeter shadow lines
- Wall modelling, panel-corner protection and decorative borders
- Glass curtain wall edge trimming and facade transitions
- Furniture frames, cabinetry edges and shop fittings
- Exhibition hall props and display structures
Because the trims share the 6063 aluminum base and surface treatment system as our other aluminum components, they can be specified as part of one coordinated scheme with our wall and ceiling systems, including the PVC Ceiling range and Wall Panel systems.
Material, Surface and Dimensional Variables
Alloy grade, temper, wall thickness and surface treatment determine how a profile handles installation handling, alignment and long-term appearance. The table below sets out the selection points we confirm before a custom profile is released to production.
| Variable |
Options We Work With |
Why It Matters |
| Alloy |
6063 series aluminum alloy |
Strength, toughness and extrusion quality of the section |
| Surface treatment |
Anodizing, powder coating, wood grain transfer printing, fluorocarbon coating |
Corrosion and weather exposure performance, plus finish durability |
| Texture and color |
Solid color, wood grain, imitation metal, frosted |
Coordination with panel and decorative wall systems |
| Section and wall thickness |
From 7×7×1 mm to 40×40×0.8 mm; custom sections per drawing |
Visual weight, rigidity and edge coverage |
| Length |
Project-specific cut lengths |
Joint layout, waste control and transport packing |
| Mounting style |
Buckle, bonding, nailing |
Substrate conditions and installation sequence |
Installation and Site Coordination
The profiles support buckle-type, bonding-type and nailing-type fixing, which lets the same detail adapt to different construction scenarios without complex base treatment. On a project, the fixing method is tied to the substrate and the sequence of panel installation: bonded trims need a clean, flat face, while buckle and nailed trims need an agreed fixing line before panels close up.
- Before installation: confirm corner cuts, mitre tolerances and the interface between trim and panel edge.
- During installation: keep batch numbers together where adjacent lengths meet to preserve color and texture continuity.
- After installation: clean with non-abrasive products so anodized and coated surfaces keep their finish.
OEM/ODM and Customization
Yicheng runs 30+ production lines across a 30,000 m² facility in Haining, Jiaxing, and our OEM/ODM process covers profile section, surface finish, color, length, packaging and brand presentation. We accept customer reference samples and images for color and texture matching, and we develop pre-production samples for approval before bulk production starts.
Customization is quoted per item. Custom sections, new surface textures and branded packaging carry tooling and setup considerations that we confirm at the proposal stage, so the first approved sample becomes the production standard for the order.
Quality Control and Acceptance
Our quality system runs from incoming raw material inspection through in-line patrol inspection to final inspection before packing. For profiles, the checks that matter most are dimensional consistency, surface finish uniformity and color/texture match against the approved standard.
- Incoming inspection of alloy stock and surface treatment materials
- In-line checks on section dimensions and surface condition during production
- Finished-goods inspection of dimensions and finish before packing
- First-batch sample retention for comparison against later production runs
- Inspection reports and photos available on request
Packing is export-standard, and the approved pre-production sample serves as the reference during acceptance. We arrange delivery and provide shipping documents to complete the order.
Information We Use to Configure Your Solution
To prepare a proposal, we need the project data below. Where the drawing is still open, we can work with sample trims and reference images to arrive at a defined section and finish.
- Project location and whether the profile is used indoors, outdoors or both
- Section drawing or reference to a standard size, plus wall thickness
- Required surface treatment, color and texture reference
- Cut lengths, quantity and joint layout
- Fixing method and substrate
- Packaging requirements, branding and shipping destination
Accessories and Related Range
Profile lines sit within a broader accessories and decorative material offer. See our Products range for the full catalogue, or explore Flooring where aluminum trim and edge detailing are specified alongside panel and floor finishes.
Frequently Asked Questions
What alloy do your aluminum alloy profile lines use?
Our profile lines are made from 6063 series aluminum alloy, extruded and precision processed to the required section.
Which surface finishes can we order?
Anodizing, powder spraying, wood grain transfer printing and fluorocarbon spraying are available, with solid color, wood grain, imitation metal and frosted textures supported.
Can the section be custom rather than a standard size?
Yes. Standard sections start at 7×7×1 mm and include 15×15×1 mm, 20×30×1 mm and 40×40×0.8 mm, and we develop custom sections from project drawings and reference samples.
How are the profiles fixed on site?
Buckle-type, bonding-type and nailing-type installation are all supported, and the fixing method is matched to the substrate and installation sequence.
Can profile lines match our wall panel and ceiling selections?
Our profile lines can be specified with our wall and ceiling systems as one integrated design, with color and texture matched against approved samples.
What do you need to quote an OEM/ODM order?
Send the section drawing or standard size, quantity, cut lengths, surface and color reference, fixing method, packaging requirements and delivery destination.