Yicheng New Materials Co., Ltd. manufactures custom polycarbonate hollow sheet (PC hollow sheet) as part of our outdoor flooring and roofing systems range. Since 1998 we have produced interior and decorative building materials from our 30,000 m² facility in Haining, Jiaxing, Zhejiang, operating 30+ production lines and exporting to distributors, importers, contractors and project partners in Latin America, Africa and Europe.
Our standard sheet is 5.8 × 2.1 m in yellow, transparent, blue and gray, supplied under our Polycarbonate Hollow Sheet programme. Sheets combine light transmission, impact resistance and low weight with thermal and acoustic insulation, making them a practical glazing and canopy material for greenhouses, sunrooms, carports, canopies and factory lighting.
What We Supply in Polycarbonate Hollow Sheet
Our range covers twin-wall and multi-wall polycarbonate hollow sheet in the standard 5.8 × 2.1 m format, with UV-resistant surfaces on the weather-facing side. The hollow structure provides an insulating air gap, keeping weight low while supporting spans typical of greenhouse roofing, carport canopies and sunroom glazing.
- Standard format: 5.8 × 2.1 m sheets, with custom lengths available through OEM/ODM development.
- Colors: yellow, transparent, blue and gray as standard; other colors matched to customer references.
- Surface: UV-resistant face for outdoor exposure; protective film supplied on sheets.
- Applications: greenhouse roofing, sunrooms, carports, canopies, factory skylights and decorative partitions.
Product Range and Application Fit
Polycarbonate hollow sheet sits within our PVC Decorative Panels, Interior Decorative Materials portfolio alongside other outdoor and decorative systems. The table below shows how the hollow sheet range maps to common project uses and how it integrates with adjacent product families.
| Product Family |
Typical Application |
Key Configuration |
Integration Notes |
| Polycarbonate Hollow Sheet (twin-wall) |
Greenhouse roofs, sunrooms, carport canopies |
5.8 × 2.1 m, clear/transparent, UV face |
Fixed to aluminium or steel frames with sealing tapes and profiles |
| Polycarbonate Hollow Sheet (multi-wall) |
Insulated glazing, factory skylights |
Multi-layer cavity, colored or opal grades |
Higher stiffness; specify edge closure and thermal movement allowance |
| Colored & decorative hollow sheet |
Carport canopies, partitions, signage |
Yellow, blue, gray and custom colors |
Color matching to customer reference or Pantone-based targets |
| OEM/ODM sheet development |
Distributor ranges, private-label projects |
Custom size, thickness, color, packaging |
Sample confirmation before mass production |
| Adjacent outdoor systems |
Decking, roofing, profiles |
PE WPC flooring, ASA roof tiles, aluminium profiles |
Combined deliveries for complete outdoor projects |
Materials, Critical Specifications and Performance
Polycarbonate hollow sheet is produced from polycarbonate resin with UV stabilization on the external face. The material choice gives the sheet high impact resistance compared with glass, good light transmission and low weight, which simplifies handling and reduces structural loads on greenhouse and canopy frames.
- Light transmission: clear grades provide the highest transmission; opal and colored grades diffuse or tint light for glare control and aesthetics.
- Impact resistance: resists breakage in hail-prone and windy locations; suitable where glass safety is a concern.
- Thermal insulation: the hollow cavity reduces heat transfer compared with single-skin glazing.
- UV protection: UV-stabilized face protects the sheet and the interior from degradation under outdoor exposure.
- Sound insulation: hollow structure dampens rain and traffic noise.
- Weather resistance: waterproof and suitable for continuous outdoor use when correctly installed.
Configuration Options and OEM/ODM Development
We treat configuration as a short, structured development process. Standard sheets can be shipped from stock colors and formats; custom work moves through requirement confirmation, sample development, sample confirmation and mass production, following our established customization process.
Size and Thickness
Standard 5.8 × 2.1 m; custom sheet lengths, widths and cavity thicknesses through sample-confirmed development.
Color
Yellow, transparent, blue and gray as standard; custom color matching to your reference against Pantone-based targets.
Packaging and Branding
Export-standard packing, private-label packaging and marketing support for distributor ranges.
Installation and On-Site Fit
Correct installation protects both the sheet and the building envelope. Our sheets are fixed to aluminium or steel frames using proprietary glazing profiles, with sealing tape on the ends and allowance for thermal expansion. The UV-protected face must face outward, and sheets should not be walked on or used where the protective film is left long-term under sunlight.
- Plan fixing points to allow for expansion and contraction across the 5.8 m length.
- Use compatible sealing tapes and closure profiles to keep dust and insects out of the hollow cavities.
- Maintain minimum roof slopes to encourage rainwater runoff and reduce ponding.
- Remove protective film after installation and before long sun exposure to prevent adhesion.
Quality Control and Acceptance
Our factory operates full-process inspection from raw materials to finished goods, supported by 30+ quality inspectors. Raw material inspection covers environmental grade and physical strength; in-production patrol checks monitor surface and process parameters; finished-product inspection includes bending resistance, impact and dimensional checks. We retain first-batch samples and compare later batches against them on appearance, color and texture.
- Batch comparison against retained first-batch samples supports consistent colour and surface across repeat orders.
- Weather-resistance testing covers waterproofing, flame retardancy, anti-aging and corrosion resistance.
- Inspection reports and photos can be supplied on request before shipment.
- Acceptance criteria are agreed at sample-confirmation stage and applied through mass production.
Information We Use to Configure Your Solution
We prepare each proposal from the project's working conditions rather than from a generic price list. The inputs below allow us to recommend the right sheet construction, colour and packing, and to quote a realistic production and delivery scope.
| Input |
Why It Matters |
Typical Options |
| Application and site conditions |
Determines UV requirement, span and fixing method |
Greenhouse, canopy, sunroom, factory lighting |
| Sheet size and thickness |
Sets load, insulation and material consumption |
5.8 × 2.1 m standard or custom lengths |
| Color and light transmission |
Affects aesthetics, glare and crop or occupant comfort |
Clear, transparent, yellow, blue, gray, custom |
| Order quantity and packing |
Drives production planning, container loading and branding |
Export-standard packing, private label |
| Target market and standards |
Aligns documentation and performance with local requirements |
Color references, specification sheets, marketing materials |
Maintenance, Documentation and Delivery
Polycarbonate hollow sheet needs little routine maintenance: clean with water and mild detergent, avoid abrasive pads and solvents, and check that sealing tapes and profiles remain intact after storms. Sheets are supplied with protective film, and we can provide product specification sheets, photos and marketing assets for distributor catalogues.
Our Custom Polycarbonate Hollow Sheet OEM/ODM Suppliers, Factory, Company service covers sampling, colour matching, packaging design and mass production, with export documentation prepared for each shipment. Adjacent outdoor products, including WPC decking and ASA roof tiles, can be combined from the same outdoor flooring systems range to simplify project logistics.
Frequently Asked Questions
What sizes and colours do you manufacture?
Our standard polycarbonate hollow sheet is 5.8 × 2.1 m, supplied in yellow, transparent, blue and gray. OEM/ODM development covers custom sheet lengths, widths, cavities and colour matching to your reference.
Can you produce under our own brand and packaging?
Yes. Our OEM/ODM programme includes private-label packing, custom colours, sample development and marketing materials such as product photos and specification sheets for your distributor catalogue.
How is sheet quality checked before shipment?
Our factory runs raw material inspection, in-production patrol checks and finished-product inspection covering bending resistance, impact, dimensional accuracy and surface appearance. We retain first-batch samples and compare later batches against them on colour and texture.
What information do you need for a quotation?
Application, sheet size and thickness, colour or light transmission requirement, order quantity, packing and branding needs, and target market. These inputs let us recommend the right construction and prepare a realistic price and delivery scope.
Can hollow sheet be combined with other products from your range?
Yes. We supply polycarbonate hollow sheet together with PE WPC flooring, ASA roof tiles, aluminium profiles and accessories, so distributors and contractors can consolidate outdoor project orders into a single shipment.