Yicheng New Materials Co., Ltd. manufactures 25cm-wide PVC ceiling panels in Haining, Zhejiang, China, from a 30,000 m² facility with 30+ production lines. We supply distributors, importers, contractors and project partners with OEM/ODM panels, custom colors, packaging and export documentation.
25cm PVC Ceiling: The Mid-Specification Ceiling Line
As a Custom PVC Ceiling - 25cm OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
The 25cm width sits in the middle of our PVC ceiling range: wide enough for fast coverage and few seams, narrow enough to handle small bedrooms, studies, small offices and shop interiors without the visual weight of a 60cm plank. We produce the full line from 5mm to 9mm, so a distributor can carry one width in several weights and serve both renovation and new-build jobs.
Panels are made from a high-strength PVC base compound with good toughness and impact resistance. Flat, single-recessed and double-recessed profiles let the designer choose a tight flush joint or a defined V-groove rhythm. Every panel in this category is 250mm wide; the difference is thickness, weight and joint detail.
Our 25cm Range at a Glance
| Profile |
Size |
Weight |
Typical Fit |
| Flat panel |
250 × 5mm |
1.6 kg/m² |
Light-duty residential ceilings, shops |
| Flat panel |
250 × 6mm |
2.0 kg/m² |
Standard residential renovation |
| Flat panel |
250 × 6.8mm |
2.2 kg/m² |
Mid-weight ceilings with extra stiffness |
| Single recessed |
250 × 7mm |
2.5 kg/m² |
Offices and shop interiors |
| Double recessed |
250 × 7mm |
2.5 kg/m² |
Feature ceilings with twin V-groove |
| Flat panel |
250 × 7mm / 7.5mm |
2.3–2.5 kg/m² |
Clean flush ceiling surface |
| Recessed / flat |
250 × 8mm |
2.5 kg/m² |
Heavier commercial ceilings |
| Black-backing flat |
250 × 8mm |
3.2 kg/m² |
Dark-gap ceilings with visible joint contrast |
| Flat panel |
250 × 9mm |
3.0 kg/m² |
High-rigidity panels for demanding spans |
These nine stock build-ups cover the usual demand mix in Latin America, Africa and Europe, where distributors want one width, several price points and finishes that match local interiors. The 8mm black-backing panel is a good example: the same 250mm face, but a darker joint line that reads as a deliberate design feature.
Where the 25cm Width Fits
- Residential ceilings: bedrooms, studies, corridors and living areas, including renovation over existing substrates.
- Small commercial interiors: offices, shops, salons and service units where a 25cm module reads at a comfortable scale.
- Humidity-prone rooms: the PVC compound and tight joint detail suit kitchens, utility rooms and bathrooms better than gypsum boards.
- Projects that want a narrower look: where a 30cm or 60cm panel would dominate a small room.
The panel is also a practical floor for distributors: one 250mm width, a small number of thicknesses and a compact accessory set. For projects that need a wider visual module, our PVC Ceiling - 30cm and PVC Ceiling - 60cm lines share the same installation method and finish options, so the same fixing team can work across a building.
Surface, Color and Finish Options
Our 25cm panels can be supplied with wood grain, stone grain or solid color surfaces. We laminate or transfer-print the decorative film onto the extruded PVC core, then check color uniformity before packing. Matte, high-gloss, transfer-printing and lamination finishes are inspected as part of our in-process control, so a repeat order stays close to the first approved sample.
For OEM/ODM programs we color-match from a physical swatch, RAL or Pantone reference or a reference image. Once the sample is signed off, it becomes the production standard for the bulk order. Texture direction, groove contrast and surface sheen are agreed at the same stage, because these details decide how the ceiling reads once installed.
Installation, Fixing and Accessories
25cm PVC ceiling panels are installed as a tongue-and-groove system. They can be fixed directly to a timber or metal keel, or clipped to a concealed carrier depending on the local method. The panels are light — from 1.6 kg/m² on the 5mm profile — so they add little load to an existing ceiling structure, which matters in refurbishment work.
We supply matching PVC and aluminum alloy profiles, angles, lines, mouldings and baseboard from our accessories range. A project pack can include edge trims, corner mouldings and the panel coverage in one delivery, so the installer is not matching profiles from a second source. Cut ends and perimeter joints should always be closed with a trim rather than left open.
Performance and Quality Control
Every batch follows a documented quality route at our factory. Incoming resin, additives and decorative film are inspected before extrusion; patrol checks run during production; and finished panels are checked against a retained first-batch sample for color, texture and appearance.
- Bending test on finished panels to confirm the board resists bending without breaking.
- Impact resistance, surface hardness, wear resistance and dimensional checks.
- Waterproof and moisture-proof performance relevant to humid interiors.
- Flame-retardancy, anti-aging and corrosion checks on finished goods.
- Batch comparison against the archived first sample for color and texture consistency.
Inspection photos or reports can be provided with a shipment when the order calls for them. This is the same control path we use across our PVC Ceiling line, so a 25cm order and a matching wall order follow comparable standards.
OEM/ODM and Customization
As a China PVC Ceiling - 25cm manufacturer, we run customization from specification to packed carton. Options include panel thickness, surface finish, color, pattern, profile detail and packaging. Our customization process moves through requirement confirmation, sample development, sample approval, bulk production, pre-shipment inspection and export packing.
Beyond the panel itself, we support private-label cartons, printed inserts, product photos and technical sheets for distributors launching their own brand. Colors are matched to your market preferences; packaging can be adapted to the way your customers buy — by the piece, by the bundle or in project pallets.
Information We Use to Configure Your Solution
| Input |
What It Determines |
| Application and room type |
Thickness, weight and joint profile |
| Ceiling area and layout |
Panel quantity, trim lengths and packing plan |
| Finish and color reference |
Film selection, sample development and color matching |
| Installation method |
Groove shape, carrier compatibility and accessory set |
| Packaging and branding |
Carton print, bundle count, labels and shipping marks |
| Target market and volume |
Production scheduling and container loading plan |
Send the room schedule, finish reference and preferred packing format together and we can return a complete configuration instead of a single price line. Our annual export volume of 1,500+ 40HQ containers reflects the scale we plan around, and our team of engineers supports the technical side of each configuration.
Frequently Asked Questions
What thicknesses do you make in the 25cm width?
We produce 250mm panels in 5mm, 6mm, 6.8mm, 7mm, 7.5mm, 8mm and 9mm, with flat, single-recessed and double-recessed profiles. The 8mm black-backing option is available for dark-gap ceiling designs. The choice usually follows the span, the fixing method and the price point your market expects.
Can you produce this panel under our own brand?
Yes. OEM/ODM covers custom colors, patterns, panel thickness, packaging, labels and marketing material. We develop a sample against your reference, and once the sample is approved it becomes the production standard for bulk goods.
How is the ceiling installed?
The panels are tongue-and-groove and fix to a keel in a direct or concealed system. Edges are closed with PVC or aluminum alloy trims from our accessories range. Because the panels are light — from 1.6 kg/m² — they are suitable for renovation over existing ceilings.
What quality checks apply before shipment?
Finished goods pass bending, impact, hardness, wear and dimensional checks, plus waterproofing, flame-retardancy and anti-aging tests. Each batch is compared against a retained first-batch sample for color and texture. Inspection photos or reports can accompany the shipment.
Which markets do you supply?
Our exports go mainly to Latin America, Africa and Europe, serving distributors, importers, contractors and project partners. The finish and packing options we recommend are shaped by the market you sell into.