Yicheng New Materials Co., Ltd. manufactures and exports custom PS Panel wall cladding from Haining, Zhejiang, China. Since 1998 we have served distributors, importers, contractors and project partners in Latin America, Africa and Europe.
Custom PS Panel OEM/ODM Manufacturing
Our PS Panel programme covers polystyrene wall cladding produced on our automated lines in a 30,000 m² facility with 30+ production lines. We make the board, the surface finish and the pack to your market brief, not only to a stock catalogue.
The range suits interior wall and ceiling refurbishment in residential, hospitality, retail and office fit-outs, where lightweight panels, fast installation and consistent colour across a project matter.
Our PS Panel Range
| Range |
Format |
Typical Fit |
| 60cm PS Panel |
60cm wide herringbone pattern, 60cm × 2.9m |
Feature walls, hotel rooms, retail interiors |
| 30cm PS Panel |
30cm plaid pattern, 30cm × 2.9m |
Ceilings, partitions, display cabinets |
| 12cm PS Panel |
12cm grooved brown wood finish, 12cm × 2.9m |
Wall linings, accent strips, refurbishment |
| 16cm PS Panel |
16cm grey wood grain with gold accents, 16cm × 2.9m |
Commercial feature walls, reception areas |
Standard visible width and length can be adjusted to the module and handling limits of the job. Custom widths, thickness targets, colours and pack formats are developed through the OEM/ODM process.
Where PS Panels Fit
PS (polystyrene) board is extruded and calendered into a light, rigid decorative panel. It cuts and splices easily, holds fine surface textures and works in complex decorative scenes where heavy board would be slow to install.
- Wood grain, stone grain and solid colour surfaces with uniform tone
- Ceilings, background walls, partitions and display cabinets
- Advertising signs and fast-renovation interiors
- Moisture-proof, moth-proof and sound-insulating interior use
The panel is intended for indoor decoration where the budget is moderate and the finish is clean and simple. Edge profiles, joints and trims should be detailed to suit the fixing method and the substrate.
Materials and Surface Finishes
We compound polystyrene with additives and apply the decorative surface through our film and transfer process. Colour matching can be reproduced against a Pantone target, and the approved sample becomes the production reference for the bulk order.
- Matte, high-gloss, transfer-print and lamination finishes
- Wood grain, stone grain, plaid, herringbone and solid colour looks
- Fire resistance, wear and antibacterial targets discussed per project
- Custom width, thickness, groove and joint detailing
Specifications for Project Proposals
| Item |
What We Confirm |
| Dimensions |
Width, length, thickness and tolerance class for each SKU |
| Surface |
Finish type, texture depth, colour reference and gloss level |
| Performance |
Bending, impact, hardness, wear, moisture and ageing checks as applicable |
| Tolerance |
Dimensional tolerance and colour consistency across batches |
Colour, Pattern and Specification Customization
Our customization work starts from your brief: panel type, target colour, reference picture, finish and application. We produce pre-production samples for approval, then hold that approved sample as the standard for mass production.
- Colour matching across a range of Pantone references
- Digital pattern printing for wood grains, logos and corporate designs
- Material tuning for fire resistance, wear or antibacterial needs
- V-groove, hidden fixing and long panel formats for seamless looks
For OEM programmes we also prepare custom colours, packaging and marketing materials so a distributor can launch the range under its own brand.
Installation and Handling
PS panels are light and easy to cut, which keeps site labour low. The board should be stored flat and dry, cut with a clean blade and fixed with trims suited to the substrate. For continuous same-pattern layouts, we keep a single production pattern so the run stays visually consistent.
- Flat, dry storage before installation
- Sharp tools and consistent cutting sequence for joint alignment
- Corresponding PVC and aluminium profile trims for edges and corners
- Suitable on-wall fixing method confirmed against the wall build-up
Quality Control and Acceptance
Our quality system runs from raw material intake to finished goods. Resin and surface films are checked on arrival; during production we patrol and sample surface condition and process parameters; before delivery we inspect dimensions and surface.
- Bending and impact checks on finished panels
- Hardness, wear and dimensional checks
- Waterproof, moisture, flame, anti-ageing and corrosion checks
- First-batch sample retention and item-by-item comparison of later batches
- Inspection photos or reports can be provided on request
Packaging, Delivery and Range Coordination
We pack to export standard and provide shipping documents. As a China PS Panel manufacturer and supplier, we coordinate PS board alongside related wall finishes such as Wall Panel and PVC Square Tube, so one shipment can cover a full interior package. Our annual export volume of 1,500+ 40HQ containers supports both growing businesses and established distributors.
Information We Use to Configure Your Solution
- Panel type, target width, length and thickness
- Surface finish, colour reference or reference picture
- Application scene and fixing method
- Project quantity and phasing
- Packaging and branding needs
- Any performance targets for fire, wear or moisture
Frequently Asked Questions
What is a PS panel made of?
Our PS panels are made from polystyrene as the main raw material, with special additives, processed by extrusion and calendering. The surface carries the wood grain, stone grain or solid colour decoration.
Can you match a specific colour or pattern?
Yes. We work from colour swatches or reference pictures, develop a pre-production sample and hold the approved sample as the standard for the bulk order. Custom pattern printing covers wood grains, logos and corporate designs.
What sizes do you produce?
The standard range includes 60cm herringbone, 30cm plaid, 12cm grooved and 16cm wood-grain panels in 2.9m lengths. Custom widths, thicknesses and long formats can be developed through OEM/ODM.
How is quality checked before shipment?
We inspect incoming resin and films, patrol the lines during production, and run finished-goods checks including bending, impact, hardness, wear, dimensional and weather-resistance tests. Inspection photos or reports can be provided on request.
Do you supply samples and packaging under our brand?
We support sample development and OEM/ODM programmes, including custom colours, packaging and marketing materials. Free samples are available with international shipping paid by the customer.
Where are your panels used?
PS panels are used for interior ceilings, feature walls, partitions, display cabinets and advertising signs, mainly in residential, hospitality, retail and office fit-outs. They are intended for indoor use.
Related Products and Categories
Our portfolio also includes Products for applications with different operating ranges, interfaces or integration requirements.