Yicheng New Materials Co., Ltd. manufactures custom PU Corner Decorations as an OEM/ODM supplier from Haining, Zhejiang, China. Our corner range covers four moulded profiles for wall corners, ceiling corners, door casings and window casings, produced alongside PU mouldings and cornices, PU stone panels and PU ceiling medallions so a single interior scheme can be sourced from one factory.
Where PU Corner Decorations Fit
As a Custom PU Corner Decorations OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
A PU corner decoration is a moulded polyurethane piece that closes the joint where two wall planes meet or where wall and ceiling meet. It covers the splice line that plaster and paint cannot hide cleanly and adds a carved, stepped or fluted layer to the corner. Our production uses precision mould forming with a surface treatment that reproduces European carving, simple linear profiles or imitation stone.
The material is lightweight, does not crack like gypsum under handling, and resists moisture, moth attack and ageing. That makes the range suitable for villas, hotels, office buildings and high-end residences, and for interior corners in humid climates where gypsum details may stain or soften.
- Wall corners: column edges, pilaster returns and changes of wall plane.
- Ceiling corners: perimeter junctions paired with cornice runs.
- Door and window casings: corner blocks that terminate casing profiles.
- Feature interiors: retail, hospitality and residential schemes requiring a carved look without solid timber weight.
Our PU Corner Decoration Range
We supply four stock corner sizes, each developed for a different scale of detail. Sizes are nominal face dimensions and the largest profile carries a deeper projection for heavier cornice work.
| Profile |
Nominal size |
Typical application |
Order route |
| Small corner |
15 × 15 cm |
Cabinets, mirrors, window reveals, compact rooms |
Stock or OEM |
| Medium corner |
24 × 24 cm |
Wall corners in apartments and offices |
Stock or OEM |
| Standard corner |
30 × 30 cm |
Hotel corridors, lobbies, door casing blocks |
Stock or OEM |
| Deep projection corner |
38.3 × 38.3 × 3.6 cm |
Ceiling junctions and cornice return details |
Stock or OEM |
Corners are designed to be used with PU Mouldings & Cornices and PU Stone Panel so that a ceiling perimeter or feature wall carries one consistent pattern language. Where the scheme calls for a centre detail, our PU ceiling medallions complete the set.
OEM/ODM Configuration We Handle
Custom work starts from your reference drawing, photo or sample. We confirm the profile style, face size, projection and surface treatment before tooling or sampling, and the approved sample becomes the production standard for subsequent batches.
- Style: European carving, simple line profiles or imitation stone relief.
- Colour: colour matching against swatches or reference images, including range colours for distributor programmes.
- Size and projection: development of additional face dimensions where volume supports a new mould.
- Packaging: export cartons and private-label packing.
- Marketing support: product photography, catalogues and specification sheets for your sales channel.
Material and Performance Considerations
The polyurethane body is dense enough to hold a moulded edge while staying light enough for one-person handling on site. It can be cut with standard tools to match angles other than a right angle, including obtuse corners, which matters on bay windows, chamfered columns and older buildings where walls are not square.
Specification points we confirm with your project team:
- Face dimension and projection of the selected profile.
- Surface treatment and colour reference.
- Fixing method and substrate at the corner.
- Indoor or sheltered-outdoor location.
- Quantity per size and mixed-container requirements.
Installation and Site Handling
Corner pieces are installed by direct adhesion to a clean, sound substrate, followed by filling at the edges and finishing to the specified paint or coating system. Where a corner meets a cornice run, the joint is mitred or butt-jointed according to the profile and filled before finishing so the transition reads as one continuous detail.
Because the material is light, installation does not require the mechanical fixing or joint reinforcement that heavy gypsum ornament usually needs. Cutting and fitting on site is straightforward, which keeps rework low on projects with irregular corners.
Quality Control and Batch Consistency
Our factory runs incoming inspection on raw materials and decorative surface films, patrol inspection during production, and finished-goods inspection before packing. A first-batch sample is retained for each item, and later batches are compared against it for appearance, colour and texture so that a distributor receiving repeat orders sees a consistent product.
For PU decor, the checks that matter on site are moulding definition, face flatness, colour uniformity across the batch and freedom from surface defects. Inspection photos and reports can be provided with the shipment when your project requires documented acceptance.
Project Inputs We Use to Prepare a Proposal
Our quotations are built from the working detail, not from a size list alone. Sending the following information with your enquiry lets us return a configuration and price without a second round of questions.
- Corner size and quantity per size, or a reference photo for a new profile.
- Style direction and colour reference (swatch, Pantone or sample).
- Indoor or sheltered-outdoor use and the substrate type.
- Whether you need stock packing or private-label packaging.
- Destination market and any labelling or documentation requirements.
- Sample requirement and target shipment window.
Manufacturing and Export Support
Yicheng New Materials has operated since 1998 from a 30,000 m² facility with 30+ production lines, exporting mainly to Latin America, Africa and Europe. Annual export volume exceeds 1,500 40HQ containers, which supports both growing distributors and established importers ordering mixed decorative ranges.
Corner decorations ship alongside our PU Architectural Decor range and the wider interior panel programme, so a container can combine PU details with PVC ceiling and wall panels from the same supplier. Export-standard packing, shipping documents and order tracking are handled as part of the order.
Frequently Asked Questions
What sizes of PU corner decorations do you manufacture?
Our standard range covers 15 × 15 cm, 24 × 24 cm, 30 × 30 cm and 38.3 × 38.3 × 3.6 cm corners. Additional face sizes and projections can be developed as OEM/ODM tooling where the order volume supports a new mould.
Can you produce corners in our own colours and packaging?
Yes. We match colour from swatches or reference images, and we produce private-label cartons and packaging for distributor programmes. The approved sample becomes the standard for bulk production.
Are PU corner decorations suitable for humid or outdoor locations?
The PU body resists moisture and ageing, which suits humid interior environments and sheltered exterior details. For fully exposed locations we confirm the fixing system and surface finish with your project team before quoting.
How are the corners fixed and finished on site?
They are fixed by direct adhesion to a clean substrate, then filled at the edges and finished with the specified paint or coating. The material can be cut to suit right angles and obtuse corners, so irregular walls do not require special order pieces.
Can corners be combined with your other PU profiles?
Yes. Corners are designed to align with our PU mouldings and cornices, PU stone panels and ceiling medallions, giving one pattern language across the ceiling perimeter and feature walls.
What do you need to prepare a quotation?
Send the corner size and quantity, style and colour reference, indoor or outdoor use, substrate, packaging requirement and destination market. With that information we can confirm the profile, sample plan and export packing for a firm quotation.