Yicheng New Materials Co., Ltd. manufactures 3D Waterproof Self-adhesive Peel And Stick Wall Sticker in Haining, Zhejiang, China. Since 1998 we have produced interior decorative materials, and this wall sticker range extends that work into fast, removable surface renovation for distributors, importers, contractors and project partners across Latin America, Africa and Europe. Our range covers vinyl floor stickers, 3D ceramic-effect wall stickers, grid acoustic-grille stickers, marble wall stickers, fabric wall stickers and vinyl flooring stickers.
Where Our Self-Adhesive Wall Sticker Range Fits
Peel-and-stick wall stickers are a surface-finishing system rather than a structural panel. They work where the wall or floor is sound, flat and dry, and where the project needs a quick visual change without removing the existing finish. Typical applications include feature walls, entrances, living rooms, bedrooms, kitchen and bathroom walls, hotel guestrooms, retail interiors, offices, rental apartments and old-house renovation.
The product family is built around a flexible polymer composite substrate with a pressure-sensitive adhesive backing. Surfaces are produced with high-definition printing and wear-resistant film lamination, then finished for moisture resistance, stain resistance and scrub resistance. Rolls are light and compressible, so they store and ship efficiently compared with rigid panels.
Rolled format
Flexible, cuttable and spliceable; low storage volume and efficient container loading for distributors.
Waterproof surface
Laminated wear layer supports wipe-down cleaning in kitchens, bathrooms and commercial interiors.
OEM/ODM
Custom colors, patterns, sizes and packaging developed from samples, swatches or reference images.
Our Wall Sticker Product Range
Each child category addresses a different surface and visual requirement. The table below shows how we position each type within the Custom 3D Waterproof Self-adhesive Peel And Stick Wall Sticker range.
| Product Type |
Typical Surface |
Application Fit |
Format Examples |
| Vinyl Floor Sticker |
Cement, old floor, ceramic tile |
Fast floor renovation in rentals, shops and offices |
152.4 × 914.4 mm wood-grain planks |
| 3D-Ceramic Self-adhesive Wall Sticker |
Interior walls, feature walls, wet areas |
Ceramic, sandstone and marble textures with 3D relief |
1.2 × 3 m rolls |
| Grid Wall Sticker |
Feature walls, acoustic grille designs |
Wood-grain, metal-strip and gold-foil grille patterns |
40 / 58 / 60 / 120 cm widths, 3 m length |
| Marble Wall Sticker |
Large interior wall panels |
Glossy and hot-stamping marble effects for commercial interiors |
1.2 × 3 m panels; 30 × 60 cm decals |
| Fabric Wall Sticker |
Textile-effect interior walls |
Soft visual finish for hospitality and residential spaces |
Roll formats matched to wall height |
| Vinyl Flooring Wall Sticker |
Walls needing a durable flooring-derived finish |
Wear-resistant decorative wrap for high-traffic interiors |
Roll widths and lengths set per project |
Material and Surface Construction
The substrate is a flexible polymer composite with lightweight modified material, giving the roll tensile strength and tear resistance while remaining soft enough to cut with a knife and conform to minor wall variation. A pressure-sensitive adhesive is applied to the reverse; no additional glue is required at installation.
- Surface printing: high-definition print with 3D texture, wood grain, stone, marble, ceramic, fabric or grille patterns
- Wear layer: laminated protective film for scrub resistance and stain resistance
- Backing: peel-and-stick adhesive with removable liner
- Format: roll or sheet; cuttable and spliceable on site
- Finish options: matte, high-gloss, hot-stamping and transfer-print effects
Critical Specifications for Project Proposals
Wall sticker performance in service depends on the adhesion between substrate, wall preparation and the intended cleaning regime. Our proposals define each of the following so that the delivered roll matches the installation site.
| Parameter |
What We Confirm |
Why It Matters |
| Roll size |
Width × length, e.g. 30 × 60 cm, 1.2 × 3 m, 58 cm × 3 m |
Controls coverage per roll, waste and joint layout |
| Thickness |
Substrate and total thickness, stated per item |
Affects conformability, relief depth and handling |
| Surface finish |
Matte, high-gloss, hot-stamping or transfer print |
Visual consistency across continuous installation |
| Pattern repeat |
Repeat length and registration for continuous runs |
Avoids mismatched joints in large commercial projects |
| Adhesive type |
Pressure-sensitive adhesive matched to application |
Balance of initial tack and clean removability |
| Color match |
Approved sample becomes the production standard |
Batch-to-batch appearance for retail and hospitality |
| Packaging |
Export carton, roll core and labeling per SKU |
Protects edges in transit and supports warehouse handling |
Substrate Preparation and Installation Guidance
Adhesion quality is decided before the liner is removed. Walls and floors should be clean, dry, flat and free of loose paint, dust, oil and moisture. Fresh plaster and newly tiled surfaces need to cure fully before a sticker is applied. In wet areas, we identify the wall zone and recommend the appropriate product type for that exposure.
- Measure the wall and plan roll direction before cutting
- Dry-fit the first panel to confirm pattern registration
- Peel the liner progressively and smooth from the centre outward to avoid trapped air
- Overlap or butt joints according to the project's visual requirement
- Clean with a damp cloth; avoid abrasive pads and solvent cleaners on printed surfaces
OEM/ODM, Branding and Retail Packaging
We support distributors and importers building their own brand rather than reselling a generic item. Custom development starts from the application, target color and pattern, roll size and packaging format, then moves through a pre-production sample, approval, bulk production, inspection and export packing. Color swatches and reference images are accepted for matching.
Available customization includes pattern printing, size and roll format, surface finish, packaging artwork and marketing materials. If a program also requires rigid wall panels or ceiling panels for the same project, those ranges sit alongside this one — see our PVC Wall Panel and SPC Flooring categories for matching interior systems.
Quality Control and Acceptance
Our quality process runs from incoming raw materials through production to finished goods. Resin, additives and decorative films are inspected on arrival; in-process patrol checks monitor surface condition and process parameters; finished rolls are inspected before packing. For each item, a first-batch sample is retained and later batches are compared against it for appearance, color and texture.
| Stage |
Inspection Focus |
Acceptance Basis |
| Incoming material |
Raw material grade, film quality, adhesive lot |
Approved specification sheet |
| In-process |
Print registration, surface finish, roll tension |
Patrol record and sample comparison |
| Finished goods |
Dimensions, color, appearance, packaging |
Approved pre-production sample |
| Pre-shipment |
Carton count, labels, pallet configuration |
Packing list and inspection photos |
Information We Use to Configure Your Solution
A wall sticker quotation depends on more than the pattern. The following project inputs let us select the right product type, roll format and packing.
- Application: wall or floor; residential, retail, hotel, office or renovation
- Surface: substrate type, condition, flatness, moisture and previous coatings
- Design: pattern reference, image or swatch; target color standard
- Format: roll width and length, sheet size, cut requirements
- Performance: cleaning regime, UV exposure, traffic level
- Quantity: first order and expected repeat volume
- Branding: private label, packaging artwork, marketing materials
- Delivery: destination port, packaging preference and shipment configuration
Frequently Asked Questions
What sizes can you produce for a custom wall sticker order?
Our standard range includes 30 × 60 cm decals, 152.4 × 914.4 mm floor planks, 1.2 × 3 m wall rolls and 40 / 58 / 60 / 120 cm grille widths at 3 m length. Custom widths, lengths and cut formats are developed from the project's wall dimensions and packing preference.
Are the wall stickers suitable for bathrooms and kitchens?
The laminated surface is moisture-proof and wipe-clean, and the 3D-ceramic and marble series are commonly specified for kitchen and bathroom walls. We confirm the exact wall zone and cleaning regime so that the adhesive and wear layer suit the exposure.
Can you match a specific color or pattern for our brand?
Yes. We match from Pantone references, physical swatches or reference images, produce a pre-production sample for approval, and treat the approved sample as the production standard for later batches. OEM/ODM packaging and marketing materials are also available.
How are the rolls packed for export?
Rolls are wound on cores, protected and packed in export cartons with SKU labels. Packing configuration, carton quantity and pallet layout are agreed with the order so that the shipment matches your warehouse and distribution requirements.
Can you supply samples before a bulk order?
Samples are available for quality and market evaluation, and sample consolidation can be arranged for multiple items. International shipping is paid by the customer. Approved samples form the reference for bulk production.
How do you keep color consistent across repeat orders?
We retain the first-batch sample for each item and compare later batches against it on appearance, color and texture. Production is inspected in-process and before packing, and inspection photos or reports can be provided with the shipment.