Yicheng New Materials Co., Ltd. manufactures 30cm PVC ceiling panels at our Haining, Zhejiang facility, where 30+ production lines run PVC, WPC, SPC and decorative panel programmes for distributors, importers, contractors and project partners. The 30cm width sits in the middle of our ceiling range: wide enough for fast coverage of large ceiling areas, narrow enough to handle corridors, bathrooms and standard residential layouts without heavy handling.
We supply Custom PVC Ceiling - 30cm OEM/ODM Suppliers, Factory, Company programmes built around your market: confirmed thickness, profile, surface finish, colour, packaging and brand marking, then produced against a retained first-batch sample.
Our 30cm PVC Ceiling Range
The 300mm panel is produced in flat and double-concave profiles across seven thickness bands. The table below reflects our current 30cm range and is the starting point for matching a specification to a project or a distributor's stock profile.
| Panel type |
Size |
Weight |
Typical fit |
| 7mm flat panel |
300 × 7mm |
2.3 kg/m² |
Light-duty residential ceilings, volume distribution |
| 7.5mm flat panel |
300 × 7.5mm |
2.3 kg/m² |
General residential and apartment ceilings |
| 8.5mm flat panel |
300 × 8.5mm |
2.4 kg/m² |
Household and light commercial rooms |
| 8.5mm double-concave panel |
300 × 8.5mm |
2.4 kg/m² |
Shadow-line ceilings, corridors, feature rooms |
| 9mm flat panel |
300 × 9mm |
3.2 kg/m² |
Commercial offices, meeting rooms |
| 9mm double-concave panel |
300 × 9mm |
3.2 kg/m² |
Exhibition halls, commercial interiors |
| 10.5mm flat panel |
300 × 10.5mm |
3.3 kg/m² |
Large public spaces with higher rigidity demand |
| 8.5mm black-gap panel |
300 × 8.5mm |
3.2 kg/m² |
High-contrast ceilings, retail and hospitality |
| 9.5mm black-backing panel |
300 × 9.5mm |
3.2 kg/m² |
Featured ceilings with defined joint lines |
| 10mm black-backing panel |
300 × 10mm |
4.8 kg/m² |
Premium commercial ceilings, heavy-traffic areas |
Thicker boards carry more material and better resist sagging across wider support spans; the black-gap families use a contrasting joint shadow to give a deliberately linear ceiling pattern rather than a continuous flat face.
Where the 30cm Format Fits
At 300mm, each panel covers roughly three times the width of a 10cm board, so installation teams close a ceiling faster and with fewer joints. That economy is why the format is common in living rooms, large offices, meeting rooms and exhibition halls, and in distributor ranges that need one panel to serve both residential and light commercial demand.
- Residential ceilings: 7.5mm and 8.5mm flat or double-concave panels for apartments and houses.
- Commercial interiors: 9mm and 10.5mm panels where a stiffer face and cleaner long runs are wanted.
- Feature ceilings: black-gap and black-backing panels for offices, retail, cafés and hotel public areas.
- Distributor stock lines: two or three thicknesses in a small colour set to cover local demand without excessive SKU count.
The 30cm board also coordinates with our narrower PVC Ceiling - 25cm format for mixed layouts, and with our wider PVC Ceiling - 60cm boards for open halls where fewer joints matter more than handling weight.
Surface, Colour and Profile Configuration
Our 30cm ceilings are supplied in matte, high-gloss, transfer-printed and laminated finishes. Wood grain and stone effects are the standard decorative directions; solid colours and brand-specific shades are developed through sampling. Colour matching accepts Pantone references, physical swatches or reference images, and the approved sample becomes the production standard for the order.
Profile
Flat face for continuous ceilings; double-concave for shadow-line joints; black-gap variants for contrast.
Finish
Matte, high-gloss, transfer print or laminated film, selected for the target market's taste and price band.
Thickness
7mm to 10.5mm, balancing weight, rigidity and installed cost per square metre.
Installation, Trim and Accessories
PVC ceiling panels are fixed to a timber or metal batten grid, or to a suspended frame, using the tongue-and-groove edge and mechanical fasteners. The 30cm board suits standard joist spacing in residential construction; wider spans need closer supports or a thicker board. We supply matching PVC profiles, corner and joint trims, and edge mouldings from our accessories range so the ceiling perimeter and wall junctions are finished in the same programme.
- Confirm substrate type, batten spacing and fixing method before ordering.
- Allow for thermal expansion at perimeters and around penetrations.
- Agree trim profiles and colours with the panel order to avoid shade mismatch at handover.
- For wet areas, coordinate ceiling panels with the room's ventilation and moisture control.
Quality Control and Batch Consistency
Incoming resin, additives and decorative films are inspected before production. During extrusion, patrol checks monitor process parameters and surface condition; before dispatch, finished panels are inspected for dimensions, appearance and colour, with bending resistance as a key test. We retain first-batch samples and compare each later batch against them on appearance, colour and texture, which is central to keeping multi-container orders visually consistent.
For projects needing documented performance, we discuss the applicable test scope at quotation stage so the right evidence is prepared alongside the order rather than after shipment.
OEM/ODM Support for Distributors and Projects
Our OEM/ODM work covers colour development, surface pattern, panel specification, packaging and brand marking. Distributors use this to build a local range under their own identity; contractors use it to hold a specified colour or profile across phases of one project. We also prepare product photography, catalogues and specification sheets that partners can use in their own market communication.
Custom development follows a fixed sequence: requirement confirmation, sample production, sample approval, bulk production, inspection and export packing. The approved sample is the reference for the bulk order.
Information We Use to Configure Your Solution
| Input |
What it determines |
| Application and room type |
Thickness, profile and finish shortlist |
| Ceiling area and layout |
Panel quantity, trim lengths and packing plan |
| Colour or reference sample |
Colour matching route and sample approval |
| Target market and price band |
Finish grade and packaging specification |
| Brand and packaging requirements |
Printing, carton marks and private-label scope |
| Installation method and substrate |
Profile choice and accessory set |
| Required tests or compliance documents |
Inspection scope and document preparation |
Packaging, Delivery and Serviceability
Panels are packed to an export standard agreed at order stage, with carton marking and private-label printing where required. Our annual export volume of 1,500+ 40HQ containers supports both regular distributor replenishment and one-off project shipments to Latin America, Africa and Europe.
PVC ceiling panels need no special coating in service; routine cleaning with a damp cloth is sufficient. Spare panels from the same production batch should be kept on site for later repairs so replacements match shade and profile.
Frequently Asked Questions
What thicknesses are available in your 30cm PVC ceiling?
We produce 7mm, 7.5mm, 8.5mm, 9mm, 9.5mm, 10mm and 10.5mm variants at 300mm width, in flat, double-concave and black-gap profiles. The choice depends on span, substrate spacing and the desired rigidity.
Can you match a specific colour or wood grain for our brand?
Yes. We match from Pantone references, physical samples or reference images, then produce a pre-production sample for approval. The approved sample becomes the standard for bulk production and is retained for batch comparison.
Do you supply matching trims and accessories with the panels?
We supply PVC profiles, corner and joint trims, and edge mouldings as part of the same order, so perimeter and wall junctions are finished in a coordinated colour and profile.
How do you keep colour consistent across multiple containers?
We retain first-batch samples and compare every later batch against them on appearance, colour and texture. In-production patrol checks and finished-product inspection add further control before packing.
What information do you need to quote a 30cm ceiling order?
Send the application, ceiling area, preferred thickness and profile, colour reference, target market, packaging or brand requirements and any test documents needed. We return a configured specification and quotation on that basis.
Related Products and Categories
Our portfolio also includes PVC Decorative Panels for applications with different operating ranges, interfaces or integration requirements.