Custom Vinyl Floor Sticker OEM/ODM
Yicheng New Materials Co., Ltd. manufactures and supplies peel-and-stick vinyl floor stickers for distributors, importers, contractors and project partners. We work from a defined plank format and printed surface, customised to your market and brand.
Our Vinyl Floor Sticker position is built on more than two decades of interior and decorative materials production at our Haining, Jiaxing facility. We supply the finished product as a self-adhesive PVC floor plank with a printed wear layer, packed and branded for your sales channel.
What We Supply
As a Custom Vinyl Floor Sticker OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
The range centres on 152.4×914.4 mm wood-grain vinyl floor stickers, the standard plank shown on our specification page. The construction is a flexible PVC sheet with a pressure-sensitive self-adhesive backing, no separate glue required. Similar formats can be prepared by request for programmes that need a different tile or plank dimension.
- Wood-grain prints: light oak, walnut, grey ash and similar interior decors
- Stone and marble options for wet-room and kitchen zones
- Printed surface with a clear wear-layer for scuff and scratch resistance
- Peel-and-stick backing, ready to use after surface preparation
The product is sold as decorative flooring, not as a structural floor. It sits on top of a sound, flat substrate: cement, existing vinyl, ceramic tile, terrazzo or sealed plywood.
Application Fit
Self-adhesive vinyl planks fit projects where the floor must change without demolition, long curing times or heavy equipment. Typical uses are rental apartments, shops, offices, homestays and light commercial interiors. The surface is waterproof on top, easy to wipe clean and replaceable in individual planks.
Retail and rental interiors
Quick refurbishment of shop floors and apartment units with minimal downtime.
Hospitality and homestays
Wood-grain finishes with a quiet, comfortable foot feel for guest areas.
Offices and display zones
Coordinated plank layouts and marble-effect accents for branded spaces.
Because the sheet is thin and flexible, it conforms to minor undulations and avoids the cracking that rigid tiles can show over uneven bases. It is not intended for wet areas with continuous standing water, outdoor exposure or heavy point loads.
Critical Specifications
We define each order around the plank format, print, adhesive and packing. The table below reflects the standard construction and the options that can be discussed at quotation stage; final values are confirmed in the approved sample.
| Parameter |
Standard / Option |
Why it matters |
| Plank size |
152.4×914.4 mm; other formats by request |
Room layout, plank appearance and cutting yields |
| Surface print |
Wood grain, stone, marble, custom pattern |
Match to local interior trends |
| Adhesive |
Pressure-sensitive peel-and-stick backing |
No extra glue, faster installation |
| Wear layer |
Clear protective top film |
Scratch and scuff resistance in traffic zones |
| Format |
Individual planks, shrink-wrapped packs |
Shelf-ready retail or bulk contractor supply |
| Packaging |
Neutral or private-label cartons |
Your brand on the shelf |
OEM/ODM Configuration
We produce under your brand from a confirmed sample. The customization route covers colour matching, surface treatment and packing, as set out in our customization programme. For ordering, use the product page or the catalogue index to see the surrounding wall and flooring families.
- Colour and print: wood tone, grey, stone or marble references; swatches and images accepted for matching
- Branding: printed cartons, labels, instruction sheets and product naming
- Packing format: planks per pack, pack weight and outer carton count
- Market launch support: product photography, catalogue pages and sales sheets
Samples can be prepared for your review. Once appearance, colour and quality are approved, the sample becomes the production reference for the bulk order.
Installation and Surface Preparation
Self-adhesive flooring is only as good as the base it sits on. We ask customers to confirm the substrate type and condition before discussing quantities. Cement should be dry, clean, dust-free and flat; old tile should be sound and free of loose grout; timber should be sealed and rigid.
- Clean and degrease the substrate; remove dust and loose material.
- Acclimatise the cartons in the room before opening.
- Set a starting line and lay planks with a consistent joint offset.
- Press or roll each plank from the centre outwards.
- Leave a small expansion gap at fixed edges and trim with a sharp blade.
Quality Control and Acceptance
Our production runs under a full-process inspection system: incoming resin and film checks, in-line patrol inspection, and finished-goods inspection for bending, impact, wear resistance and dimensions. Batch colour and texture are compared against a retained first-batch sample. Inspection reports and photos can be provided on request.
At shipment acceptance, we normally agree on the approved sample, the print reference and the packing specification. This gives your receiving team a simple visual and dimensional reference instead of a subjective judgement. For projects, we can match the print across production runs destined for the same installation.
Information We Use to Configure Your Solution
Our proposal is prepared from your working brief. The more complete the input, the more accurate the sample and quotation.
- Target market, sales channel and expected annual or seasonal volume
- Plank format, thickness and whether a standard size applies
- Surface print: wood, stone or marble reference; colour swatch or photo
- Substrate type and condition at the point of installation
- Packaging: neutral, private label or printed carton artwork
- Sample requirement and approval route
- Delivery port, container plan and any labelling rules for your market
With those inputs we confirm the material build, the print route, the pack count and the sample schedule before production. Documentation and marketing files are prepared alongside the order, not after it.
Frequently Asked Questions
What is the standard size of your vinyl floor sticker?
The standard plank is 152.4×914.4 mm in a wood-grain print. Other formats can be discussed for programmes that need a different tile or plank dimension.
Do you supply as OEM/ODM with our brand?
Yes. We produce under your brand with private-label cartons, labels and instruction sheets, using your approved sample as the production standard.
Can it be laid over existing tile or concrete?
Yes, provided the base is sound, flat, dry and clean. The peel-and-stick backing bonds directly to cement, ceramic tile, existing vinyl or sealed timber.
How do you confirm quality before bulk production?
We develop a pre-production sample from your reference. Once you approve appearance, colour and quality, that sample becomes the standard for the bulk order and for batch comparison.
Are samples available?
Sample development is part of our customization process, and colour swatches or reference images are accepted for matching.
Related Products and Categories
Our portfolio also includes PVC Ceiling for applications with different operating ranges, interfaces or integration requirements.