Custom Fabric Wall Sticker OEM/ODM: Our Manufacturing Position
Yicheng New Materials Co., Ltd. manufactures fabric wall stickers as part of a broad interior decorative materials programme that began in 1998 in Haining, Jiaxing, Zhejiang Province, China. Our 30,000 m² facility and 30+ production lines support OEM/ODM orders for distributors, importers, contractors and project partners, with annual exports of 1,500+ 40HQ containers, mainly to Latin America, Africa and Europe.
We supply fabric wall sticker formats for feature walls, residential rooms, hotel guestrooms, shops, offices and renovation work. The range covers the 1.2m × 3m fabric wallpaper, 1.2m × 3m velvet wall sticker, 1.2m × 3m 5D printing film, 70cm × 275cm colorful linen fabric wall sticker and 23 × 49cm soft wall panel. Each format is produced with a flexible polymer composite substrate and lightweight modified material, finished with high-definition printing and a wear-resistant laminated film.
Our Fabric Wall Sticker Range and Application Fit
The table below shows the formats we produce and where each one is typically used. Roll dimensions and surface character are the first points in matching a format to a market or project.
| Format |
Roll Size |
Typical Applications |
Notes |
| Fabric Wallpaper |
1.2m × 3m |
Living rooms, bedrooms, feature walls |
Rollable, lightweight, wide decorative coverage |
| Velvet Wall Sticker |
1.2m × 3m |
Hotel rooms, shop interiors, accent walls |
Soft-touch surface, printable velvet effect |
| 5D Printing Film |
1.2m × 3m |
Commercial feature walls, entrance areas |
High-definition print with textured 3D appearance |
| Colorful Linen Fabric Wall Sticker |
70cm × 275cm |
Residential renovation, offices, rental housing |
Linen texture, narrower roll for retail and light project work |
| Soft Wall Panel |
23 × 49cm |
Small feature areas, headboards, repair and touch-up |
Pre-cut panel for fast installation and localized replacement |
Material Construction and Surface Performance
Our fabric wall stickers combine a flexible polymer composite substrate with a lightweight modified material that can be rolled for storage and transport. The material is soft, flexible and resistant to tearing, so it is not easily cracked, broken or deformed. The printed surface is protected by a wear-resistant laminated film and produced with high-definition printing, giving the panel a realistic 3D texture and a broad color range.
- Moisture resistance: suitable for bathroom walls and other humid interior areas when installed on a sound substrate.
- Stain resistance: the laminated surface can be wiped and scrubbed for routine cleaning.
- Flexibility: the rollable base conforms to normal wall irregularities and stays stable after application.
- Light weight: reduces transport cost and handling effort on small and large installations.
OEM/ODM Customization: Color, Pattern, Size and Packaging
We build OEM/ODM orders around the customer's market, brand and selling format. Custom work can cover color matching from Pantone references, pattern development from artwork or reference images, roll-size and panel-size adjustment within the selected format, and retail or project packaging. Our customization process follows requirement confirmation, sample development, sample approval, bulk production, final inspection and export packing.
For buyers developing a private-label range, we can supply product photography, video and technical documents to support local sales. Color matching is carried out against approved samples, which then become the reference standard for the bulk order.
Quality Control and Acceptance
Fabric wall sticker production runs through incoming material inspection, in-process patrol checks and finished-goods inspection. We retain a first-batch sample for each item and compare later batches against it for appearance, color and texture, which helps maintain consistency across repeat orders. Finished products are checked for dimensional accuracy, surface effect, adhesion and color uniformity before packing.
Acceptance points we confirm before shipment: roll width and length, printed pattern against the approved sample, color consistency, lamination quality, adhesive performance and export packaging condition. Inspection photos and reports can be provided when agreed in the order.
Installation, Handling and Maintenance
Fabric wall stickers install quickly without complex construction: the backing is removed and the sticker is applied to a clean, dry, smooth wall, then pressed from the centre outward to release air. Cutting around outlets, corners and trim is done with a sharp blade. Removal is straightforward for renovation work, leaving the wall ready for repainting or a new decorative layer.
Routine maintenance is limited to dry wiping or a damp cloth. Abrasive cleaners and sharp tools should be avoided to keep the laminated film and printed surface intact. Where fabric wall stickers are installed in kitchens or bathrooms, the wall should be sealed and protected from direct, continuous water contact.
Information We Use to Configure Your Solution
To prepare a suitable fabric wall sticker proposal, we need the working details of your product range and project. The list below is the starting point for most OEM/ODM and project quotations.
- Product format: fabric wallpaper, velvet wall sticker, 5D printing film, linen fabric wall sticker or soft wall panel.
- Size and packing: required roll or panel dimensions, core type, carton quantity and any private-label packaging artwork.
- Pattern and color: artwork files, reference images or Pantone codes, plus target visual effect (matte, gloss, textured or linen).
- Application: residential, hotel, retail, office or renovation; wall condition, humidity exposure and expected service life.
- Quantity and delivery: initial order volume, repeat-order plan, destination port and preferred Incoterm.
- Documentation: product photos, specification sheets, technical data and inspection reports required for your market.
We also supply complementary interior products for distributors and project contractors, including wall panels and PVC ceilings. These can be combined with fabric wall stickers in a single container to simplify sourcing and freight planning.
Frequently Asked Questions
What formats of fabric wall sticker does Yicheng supply?
We produce 1.2m × 3m fabric wallpaper, 1.2m × 3m velvet wall sticker, 1.2m × 3m 5D printing film, 70cm × 275cm colorful linen fabric wall sticker and 23 × 49cm soft wall panel. Custom sizes can be discussed within each format.
Can you produce fabric wall stickers under our own brand?
Yes. Our OEM/ODM service covers custom colors, patterns, roll sizes, packaging and marketing materials. We develop a sample based on your artwork or reference, and the approved sample becomes the standard for bulk production.
Are the stickers suitable for bathrooms and kitchens?
The laminated surface is moisture-proof, stain-proof and scrubbable, so the material can be used on kitchen and bathroom walls when the substrate is sound and direct water contact is avoided. For continuously wet areas, we recommend confirming the wall preparation and sealing method with our technical team.
How do you maintain color and pattern consistency across repeat orders?
We retain the first-batch sample for each item and compare subsequent batches against it for appearance, color and texture. Printing and lamination parameters are controlled during production, and finished goods are inspected before packing.
What is the minimum information needed for a quotation?
We need the product format, size, pattern or color reference, order quantity, packaging preference and destination. With these details we can prepare a configuration and price for your review, including sample arrangements where required.
Yicheng New Materials Co., Ltd. is a China-based Custom Fabric Wall Sticker OEM/ODM Suppliers, Factory, Company manufacturer. Our team supports product selection, sampling, custom development and mass production for distributors, importers and project partners worldwide.