Custom Interlocking Panel - 30cm: PVC Wall and Ceiling Now Produced to Your Specification
As a Custom Interlocking Panel - 30cm OEM/ODM Suppliers, Factory, Company, we match product configuration to the application, operating limits, interfaces and acceptance criteria defined for each project.
Yicheng New Materials Co., Ltd. manufactures interlocking PVC panels in a 30 cm face width for wall and ceiling systems, supplied as a custom-made item within our wider range of interior decorative panels. The 300 mm format suits quick refurbishment where joints must align, surfaces stay cleanable, and the panel line must fit standard support spacing without heavy demolition work.
Since 1998 we have built decorative building materials in Haining, Jiaxing, Zhejiang, across a 30,000 m² facility with 30+ production lines. Distributors, importers and project partners in Latin America, Africa and Europe order this panel for residential, hospitality and commercial fit-outs, where a consistent 30cm interlocking profile simplifies purchasing and installation planning.
Where the 30 cm Interlocking Format Fits
A 300 mm interlocking PVC panel works as both a wall lining and a lightweight ceiling board. The tongue-and-groove edge engages without visible fasteners on the face, so panels run in one direction across a room or corridor while the installation sequence stays simple for skilled crews and semi-skilled installers.
- Residential refurbishment: kitchen ceilings, bathroom walls, utility rooms and rental interiors where the panel sits over existing plaster or tile backing.
- Commercial interiors: shop units, office partitions, cafés and corridors that need a cleanable surface changed quickly between tenancies.
- Hospitality: hotel bathrooms and back-of-house areas where moisture resistance and repeatable colour matter across floors.
- Modular and prefabricated builds: panel lengths cut to module size, packed as an accessory set with trims and fixings for site assembly.
How the 30 cm Profile Sits in Our Custom-Made Panel Range
Interlocking panels are one branch of our PVC Decorative Panels, Interior Decorative Materials range for custom architecture finishes. The 30 cm version is the mid-width option: wider than narrow ceiling strips that require more fixings, narrower than wide-face wall boards that need extra care on uneven substrates.
| Available Format |
Face Width |
Typical Fit |
| Interlocking Panel - 14.5cm |
145 mm |
Small ceilings, bathrooms, tight wall runs and decorative strips |
| Interlocking Panel - 30cm |
300 mm |
Standard wall linings, ceiling systems and fast-fit interiors |
| Interlocking Panel - 40.6cm |
406 mm |
Wide wall panels and large surfaces where fewer joints are wanted |
| PVC Ceiling - 30cm |
300 mm |
Ceiling-only installations and matching designs where both wall and ceiling come from the same family |
Because the interlocking edge does not require a separate cover strip between boards, a 30 cm layout is easy to plan: divide the surface width by 0.30 m, allow the last panel to be cut through its flat field, and finish with our PVC or aluminium trims.
Specification Choices We Confirm Before Production
The build of a 30 cm interlocking panel is fixed by substrate, thickness, surface finish and colour rather than by the width alone. We confirm these items before making samples so that the order and the sample stay aligned.
| Specification |
Choices We Produce |
What It Controls |
| Core material |
PVC, or other panel cores within our range |
Mass, stiffness, moisture behaviour |
| Thickness |
Thinner ceiling grades to stiffer wall grades |
Sag resistance, fixing strength, edge stability |
| Surface finish |
Matte, high-gloss, transfer printing, lamination |
Look, cleanability, sheen consistency |
| Colour and pattern |
Standard ranges or custom colour matching, including Pantone references where supplied |
Brand look and batch-to-batch visual match |
| Length and edge |
Fixed lengths or cut-to-order; standard interlocking edge |
Installation speed, wastage, containment of joints |
Materials and Surface Performance
Interlocking PVC panels are chosen for wet and humid interiors because the unplasticised or modified PVC skin does not absorb water at the face, unlike timber, paper-faced plasterboard or wood wool. Our panels are used in ceiling and wall systems for houses and commercial projects where the client expects the lining to be wipeable and to resist everyday moisture.
- Matte and high-gloss finishes in plain colours for contemporary interiors.
- Transfer-printed wood, marble and stone patterns for walls, feature strips and ceilings.
- Laminated finishes where a thicker decorative layer is preferred.
- White and neutral PVC boards, including variants matched for ceiling use.
Before shipping, we inspect raw materials, patrol the extrusion and lamination lines, and test bending, impact and wear resistance. Weather resistance tests cover moisture, flame-retardancy indicators and anti-ageing. We keep a first-batch sample for each item and compare later batches to it on appearance, colour and texture.
Using 30cm Panels with Ceiling and Wall Panels
The 30cm interlocking format is normally combined with matching PVC Ceiling boards or with larger PVC Wall Panel faces to balance joint lines between horizontal and vertical surfaces. Where a project wants almost no visible joints on long wall runs, wider formats such as the 60cm boards reduce the number of lines, while the 30cm panel is preferred where installation is on a tight grid of battens.
Installation, Fixings and Accessories
The 30cm panel requires a continuous substrate and a batten or frame grid, plus the correct edge trim, angle, line and skirting. We supply these fixings within our PVC profile and aluminium alloy profile accessory range, so a full panel count can be converted directly into a matching trim list.
- Start with a setting-out row and keep the panel joints parallel to the primary viewing direction.
- Cut the final panel through the flat field, not through the interlocking edge, and cap it with an edge trim.
- Use the matching internal and external corner trims for returns and window reveals.
- Leave a perimeter gap for thermal movement where the wall system is exposed to sunlight or temperature swings.
Once the panel is installed, maintenance consists of cleaning with a damp cloth and neutral detergent; replacement of a damaged board is achieved by releasing the interlock on the damaged panel and inserting a new one without taking down the full wall.
OEM / ODM Program for Distributors and Project Brands
Our OEM/ODM programme is built around the fact that distributors need their own brand on the panel, film, carton and catalogue rather than a generic factory product. We produce samples from colour swatches or reference pictures; once the sample is approved, it becomes the standard for bulk goods and is kept as the comparison reference for later batches.
Beyond the panel itself, we support packaging design, printed cartons and branded catalogues, along with editable marketing materials and specification sheets. This allows a private-label programme to be assembled from the same factory line that produces standard 30cm stock.
Information We Use to Configure Your Solution
We prepare the quotation from the construction data rather than from the panel name alone. The more complete the input, the tighter the sample and pricing can be.
- Application: wall or ceiling; wet room, kitchen, corridor, office or shop unit.
- Dimensions: total surface area, panel running direction, cut lengths and any curved or corner returns.
- Surface and colour: matte, high-gloss, transfer or lamination; standard colour or a reference sample for matching.
- Thickness preference: where a specific thickness is required by the local specification or ceiling grid.
- Trims and accessories: corner, edge, joint and skirting profiles required per panel count.
- Packaging and branding: carton artwork, private-label wording, pallet or box configuration.
- Quantity and route: annual volume, trial order volumes and the country of delivery.
We translate the proposals we receive into a sample, a colour match and a packing layout, then run production against the approved sample. Our process mirrors the approach used across our wall panel range and is used on every custom-made order.
FAQ: Custom Interlocking Panel - 30cm
Is the 30cm panel suitable for both walls and ceilings?
Yes. The 30cm board is ordered as a wall lining or a ceiling panel. The difference is mainly the thickness required and the fixing grid. On ceilings, a thinner grade is often used to keep weight low; on walls, a slightly heavier board improves edge stability and resistance to impact.
Can we order the panel with our own colour and logo on the carton?
We produce custom colours using reference samples or colour values, including Pantone references where supplied, and we support private-label carton printing. We arrange a pre-production sample before bulk production so both colour and packaging are approved before the line starts.
How do you keep colour and finish consistent between batches?
For each item we retain an approved sample from the first batch. Later batches are compared against that sample for appearance, colour and texture, and the in-process inspection checks surface effect and dimensional consistency on the line. Where a change is unavoidable, the difference is detected before packing rather than on site.
What lengths can the 30cm interlocking panel be supplied in?
Panels are produced in fixed lengths or cut to the lengths needed for the project. We confirm the longest readable length and the packing size together, so the delivered boards match the handling and site access available for the installation.
Can the panel be used in bathrooms and other wet rooms?
The PVC face is waterproof and does not absorb moisture, so it is suitable for bathrooms and utility areas when the substrate and perimeter are installed correctly and a suitable sealant is used at edges and penetrations. It is not a substitute for a fully tanked shower system below the tiling line.
Do you supply the trims and fixings with the panels?
We supply matching PVC profiles and aluminium alloy profiles for edges, corners and joints. When the panel count is confirmed, the corresponding trim quantity is calculated and packed with the shipment, reducing the need to source accessories separately.
Our production and export team handles Custom Interlocking Panel - 30cm OEM/ODM Suppliers orders from sample through to container loading, with the 30cm panel produced on the same lines and quality system as our other custom-made panels. Send the application, surface area, colour reference and packing requirements to begin the configuration.