Custom PU Stone Panels from Yicheng New Materials
Yicheng New Materials Co., Ltd. manufactures custom PU stone panels for distributors, importers, façade contractors and interior fit-out projects. Our PU Architectural Decor range reproduces travertine, slate, brick and rubble-stone surfaces in lightweight polyurethane, so walls that once required quarried stone can be clad with smaller crews, fewer fixings and less structural load.
Production runs from our 30,000 m² facility in Haining, Jiaxing, with 30+ lines handling both standard profiles and OEM/ODM programs. We supply the PU Stone Panel to markets across Latin America, Africa and Europe, with annual export volume of 1,500+ 40HQ containers.
Our PU Architectural Decor Range
PU stone panels sit within a wider system of PU decorative elements. Supplying the full set from one plant lets a project specify wall cladding, cornices and ceiling details with consistent material, colour and surface treatment.
| Product Family |
Typical Form |
Where It Fits |
| PU Stone Panel |
1200 × 600 mm panels, 25–80 mm relief |
Feature walls, fireplaces, façades, columns, entrance surrounds |
| PU Mouldings & Cornices |
Linear profiles, ceiling borders |
Wall-to-ceiling transitions, classical interiors |
| PU Corner Decorations |
Corner blocks, quoins |
Façade edges, column bases, door surrounds |
| PU Ceiling Medallions |
Circular and oval ceiling centres |
Feature ceilings, chandelier mounts, hospitality interiors |
Why PU Stone Panels Fit Modern Cladding Projects
PU stone panels are moulded from polyurethane with anti-aging and moisture-proof additives, then hand-finished to bring out the stone grain. The material weighs roughly one-fifth to one-eighth of natural stone of the same coverage, which reduces handling effort, fixing density and dead load on framed walls and renovation substrates.
- Direct adhesion to flat, sound substrates without masonry ties
- Cut and drilled with standard woodworking tools
- Moisture-proof and mildew-resistant for humid or coastal sites
- Weather-resistant formulations available for exterior wall and courtyard use
- Wipe-clean surface that resists fading and cracking
Standard and Custom Configurations
Our catalogue covers, among others, the White Magnolia, Space Black, Modern White and Gray Hollow stone-pattern panels. For OEM/ODM programs we adjust colour, relief depth, panel format and packaging around a confirmed sample.
| Specification |
Standard Range |
Customization Option |
| Panel size |
1200 × 600 mm |
Custom formats for façade and feature-wall modules |
| Thickness / relief |
25 mm, 30 mm, 38 mm, 60 mm, 80 mm |
Relief depth tuned to design intent |
| Colour / texture |
White, grey, black and stone-pattern series |
Colour matching from swatch or reference image |
| Packaging |
Export corrugated cartons |
Private-label cartons, inserts and barcode labels |
Application Fit: Interior and Exterior
Interior uses include background and TV walls, entrance halls, fireplace surrounds and columns. Exterior use covers façade accents, courtyard landscapes and villa elevations, where panels can be fixed over masonry, cement board or structural sheathing with appropriate adhesive and mechanical support.
Suitable substrates
- Cement render, masonry and concrete
- Cement board and fibre-cement sheeting
- Interior plasterboard with suitable anchor detail
- Renovation substrates that are sound, dry and dust-free
Installation and Handling
Panels are supplied prefinished and can be cut, chamfered and drilled on site to follow openings, corners and rooflines. Correct sequencing starts at a set-out datum, with expansion gaps and weather-sealed joints where exterior temperatures vary. Manufacturer instructions and the project's substrate specification should drive adhesive selection and mechanical fixing intervals.
- Store flat, out of direct sun and away from water before fitting
- Acclimatise on site for 24–48 hours before installation
- Use adhesive suited to the substrate and climate zone
- Seal exposed cut edges on external walls
- Final clean with a damp cloth, avoiding solvent-based cleaners
Quality Control and Acceptance
Raw materials and mouldings are inspected before production. In-process patrol checks monitor surface and dimensional consistency, and finished goods are checked before packing. Retention samples from the first batch are kept as the reference for subsequent batch comparison on appearance, colour and texture.
Tests include bending resistance, impact, hardness, wear resistance and dimensional checks, together with moisture and weathering performance appropriate to the product family. Inspection reports or photographs can accompany dispatch on request.
OEM/ODM, Packaging and Market Support
OEM/ODM work covers colour, surface finish, pattern, size and packaging. Export-standard cartons can be produced with private-label artwork, while product photos and technical documents support distributor catalogues and contractor submittals. Full-container and mixed-load shipments can be consolidated with other ranges from our Products category, such as PU Architectural Decor, to fill a single 40HQ container.
Information We Use to Configure Your Solution
| Project Input |
What We Need to Know |
| Application |
Interior or exterior, wall build-up, substrate type and exposure |
| Texture and colour |
Reference images, colour swatch or existing sample |
| Format |
Panel size, thickness and relief depth |
| Quantity and packing |
Order volume, carton marking and pallet preference |
| Branding |
OEM/ODM label artwork, product literature and language requirements |
| Acceptance |
Inspection standard, sample approval and documentation requirements |
Send this information with your target delivery window and we will return a configuration sheet, sample proposal and packing plan for review.
Frequently Asked Questions
Can PU stone panels be used outside?
Yes. Our formulations include anti-aging and weather-resistant options for exterior walls, courtyards and villa façades. The substrate, adhesive and joint sealing need to match the exposure conditions, and we specify these with the project.
What is the standard panel size and thickness?
Our standard PU stone panels are 1200 × 600 mm. Thickness and relief vary by pattern, covering 25 mm, 30 mm and 38 mm profiles up to 60 mm and 80 mm for deeper stone effects. Custom sizes are available for confirmed OEM/ODM programs.
Do you provide samples before bulk orders?
We supply samples for colour and texture review. International shipping is paid by the customer, and we can consolidate samples with catalogues or other product references for efficient evaluation.
Can the panels carry our brand on packaging?
OEM/ODM packaging is part of our service. We print private-label cartons, inserts and barcode labels, and can include product images and specification sheets for your own sales channel.
How do you keep colour consistent between orders?
We retain first-batch samples for each item and compare every subsequent batch against it on appearance, colour and texture. In-process checks and final inspection are carried out before packing.
Can PU stone panels ship with other products in one container?
Yes. We can combine PU stone panels with mouldings, cornices, medallions or other interior ranges into a mixed-load container. Share the full SKU list and quantities and we will build a loading plan.