12cm Grooved Brown Wood PS Panel

Key Advantages

• 12cm narrow width: suitable for detail decoration, linear patterns, and narrow wall areas
• Brown wood grain texture: presents wood tones and texture, visually close to natural wood grain
• Grooved metallic accent finish: linear grooves with embedded gold decorative lines for two-tone detailing
• PS substrate: lightweight, water-resistant, moisture-resistant, mold-resistant, insect-resistant
• Scratch and wipe resistant: surface withstands daily wiping and minor scratches
• Deformation-resistant: substrate provides high structural stability for long-term use
• Long-lasting color: high color stability of laminate and decorative layer with low fading rate
• Easy installation: standard panel dimensions; adhesive or dry-hanging installation

Product Features

Applications

• Accent wall detailing: TV background side accents, sofa background borders, bedroom headboard wall lines
• Chair rails: mid-wall dividing decorations, wainscoting top edge finishing
• Entryway partitions: entrance wall decorative strips, partial-height partition borders
• Hotel projects: guest room wall line decorations, corridor chair rails, elevator lobby detailing
• Clubs and high-end venues: private room wall decoration, lounge area linear accents
• Other venues: exhibition halls, showrooms, office interior wall detailing

FAQ and Precautions

Q: Will the gold decorative lines fade or oxidize?
A: The gold accents are applied using a specialized finishing process with a protective layer. Under normal indoor conditions, oxidation or fading is unlikely. Avoid exposing the gold surface to strong acid or alkaline cleaners.

Q: What are the suitable applications for the 12cm narrow width?
A: The 12cm width is suitable for wall line decorations, chair rails, accent wall borders, door trim alternatives, baseboard replacements, and other detail applications. It is also suitable for narrow wall areas and mixed-material designs.

Q: Is the brown wood texture real wood veneer or simulated?
A: The brown wood texture is a simulated wood grain lamination, not real wood veneer. Its advantages include uniform pattern, no natural wood knots or color variation, no coating maintenance required, and lower cost.

Q: What is the difference between PS panels and solid wood trim?
A: PS panels are lighter, water resistant, moisture resistant, insect resistant, deformation resistant, and require no periodic coating maintenance. Solid wood trim retains natural wood grain and texture but is susceptible to humidity-induced deformation and requires regular maintenance. Selection depends on project requirements for material properties and budget.

Q: Can it be used in humid environments such as bathrooms?
A: PS panels offer water and moisture resistance, suitable for bathroom dry area wall line decoration (sink areas, toilet backgrounds). For areas near shower zones, maintain distance from direct water exposure.

Precautions

• Check substrate flatness, dryness, and cleanliness before installation. Trim products require a flat substrate. Recommended deviation ≤2mm over 2 meters.
• Use a fine-tooth saw blade or sharp utility knife for cutting. PS material is relatively brittle; avoid excessive force to prevent chipping or cracking. For 45° miter joints, control angles precisely.
• Use neutral eco-friendly adhesives (e.g., MS adhesive, PS panel-specific adhesive). Avoid solvent-based adhesives containing toluene or xylene that may corrode the PS substrate.
• Clean with a soft cloth and neutral detergent. Avoid steel wool, stiff brushes, abrasive cleaners, or strong acids/alkalis. PS material is sensitive to certain organic solvents; avoid wiping with alcohol, thinner, or similar solvents.
• Store panels flat with stack height not exceeding one meter. Avoid heavy pressure or scratches from sharp objects on the surface and gold decorative layer.
• PS panels are sensitive to UV radiation. Prolonged direct sunlight exposure may cause material aging or wood grain fading. Use indoors away from direct sunlight or install curtains.
• Protect panel surfaces and edges during transport. Avoid impact that may cause cracking, edge damage, or scratching of the gold decorative layer.
• Ensure consistent panel orientation during installation to maintain continuous alignment of grooves and gold accents. Use 45° miter joints or dedicated corner trim at corners.
• Avoid using transparent adhesive tape for temporary fixing on the surface, as residue may damage the laminate or gold decorative layer.
• The gold decorative layer is sensitive to scratches from hard objects. Protect during installation and use.