Pure White Texture Ceramic Self -adhesive Wall sticker

Key Advantages

• Self-adhesive installation: Pre-applied pressure-sensitive adhesive layer; Peel and stick without drilling, gluing, or cement mortar.
• Flexible structure: Material bends to fit slightly curved or non-flat walls; Passes 50mm diameter bend test without cracking.
• Stone simulation: Surface texture and pure white color replicate natural stone appearance; Grain depth and density are uniformly distributed via mold pressing.
• Weather resistance: Formulated with UV stabilizers and anti-aging agents; Suitable for exterior walls with color difference ΔE ≤ 3 after accelerated aging testing.
• Fire rating: Achieves B1 fire rating (according to GB 8624 standard); Self-extinguishing after flame removal.

Product Characteristics

Application Scenarios

• Residential accent walls: TV background walls, sofa back walls, headboard walls.
• Full-wall renovations: Direct application over old ceramic tiles or latex paint walls without demolition.
• Hotels and hostels: Guest rooms, corridors, lobby accent walls.
• Retail and commercial spaces: Clothing stores, cafes, exhibition halls, beauty salons.
• Villa exteriors: Partial exterior walls, entrance accents, balcony walls.
• Public spaces: Offices, hospital waiting areas, school corridors.

Common Precautions

• Substrate requirements: Substrate must be flat, dry, free of oil, grease, loose dust, and peeling paint. For latex paint walls, verify that the paint film is firmly bonded; Loose sections must be scraped and sanded.
• Substrate flatness: Walls with height variations exceeding 2mm per meter require leveling to ensure flat adhesion and proper seam alignment.
• Pre-installation cleaning: Clean substrate with mild detergent to remove oil and wax. For tile walls, light sanding is recommended to increase roughness and improve adhesion.
• Application procedure: Peel off the release film, align from one edge, and press down. Use a squeegee to push air bubbles outward from the center. Leave 0.5-1mm expansion gaps at seams or fill with color-matched grout.
• Ambient temperature: Recommended installation temperature is no lower than 10°C. At low temperatures, initial tack is reduced; Use a hair dryer or heat gun to warm the adhesive layer evenly before application.
• Exterior installation: For outdoor use, seal edges with weather-resistant caulk to prevent edge curling from prolonged wind exposure.
• Cutting method: Cut with a utility knife along a straight edge using a sharp blade to avoid burrs. For irregular areas, create a paper template before cutting.
• Storage conditions: Store rolls flat in a cool, dry place away from direct sunlight and high temperatures. Storage temperature should not exceed 35°C with humidity below 70%.
• Removal method: Heat the surface to 50-60°C with a heat gun to soften the adhesive, then peel from corners. Residual adhesive can be removed with adhesive remover or rubbing alcohol.