Yicheng New Materials Co., Ltd. manufactures installation accessories that complete interior and decorative panel systems: PVC profiles, aluminum alloy profile line, angle moulding and baseboards. These are the trims that finish ceiling edges, wall corners, door and window casings, skirtings and transitions where panels meet plaster, masonry or other surfaces.
We have produced decorative building materials in Haining, Jiaxing, Zhejiang since 1998, with a 30,000 m² facility and 30+ production lines. Accessories for our PVC Decorative Panels, Interior Decorative Materials range are developed alongside the panels they serve, so face color, surface texture and profile geometry can be coordinated across a single project package.
Our Accessory Range
Each sub-category has a defined role in installation. Profile geometry, material grade and surface treatment determine where it works, and we match these to the panel format and substrate on the project drawing.
PVC Profile
Extruded PVC trims for corner, edge and transition finishing, including I-shaped profiles and film-wrapped corner trim. Light, flexible and resistant to moisture and deformation.
Aluminum Alloy Profile Line
Metal trims from 6063 series alloy, produced by extrusion and surface treated. Suited to edge trimming, wall shaping, curtain wall edging and furniture frames where strength and outdoor tolerance matter.
Angle Moulding
L-shaped WPC, SPC and wood-plastic right-angle mouldings for external and internal corners, wall edge protection and furniture corner guards. Hard-wearing and low maintenance.
Baseboard
Skirting profiles that close the panel-to-floor junction. Supplied in coordinated finishes so the skirting reads as part of the wall system rather than an added element.
Accessory Range and Application Fit
| Accessory type |
Base material |
Typical profiles |
Where it fits |
| PVC Profile |
Rigid PVC |
I-shaped 0.9 cm high, 120 g/m; corner trim 0.85 × 0.85 cm, 90 g/m; film-wrapped 0.9 × 0.9 cm, 135 g/m; skirting 1.0 cm high, 140 g/m |
Ceiling edge finishing, wall corners, door and window casings, background wall borders, cabinet edges |
| Aluminum Alloy Profile Line |
6063 series aluminum alloy |
7 × 7 × 1 mm; 15 × 15 × 1 mm; 20 × 30 × 1 mm; 40 × 40 × 0.8 mm corner mouldings |
Interior and exterior edge trimming, glass curtain wall edging, furniture frames, exhibition and display construction |
| Angle Moulding |
WPC, SPC and wood-plastic composite |
20 × 20 mm fabric-textured; 25 × 25 mm wood grain, yellow matte and SPC right-angle |
External and internal wall corners, wall edge protection, floor edge finishing, furniture corner protection |
| Baseboard |
PVC and composite options |
Skirting sections matched to panel height and wall build-up |
Wall-to-floor junction in residential and commercial interiors, corridors, hotel rooms and offices |
Matching Accessories to the Panel System
Panel systems need trims sized to the panel thickness, the reveal and the fixing method. A 0.9 cm PVC I-profile and a 1.0 cm skirting perform different junction roles, so selection starts from a section drawing rather than from a trim catalogue list.
- Edge finishing: I-shaped and corner profiles close cut panel edges and align adjacent boards.
- Corner protection: L-shaped WPC and SPC mouldings absorb impact at external corners in circulation areas.
- Transitions: profiles bridge panel-to-plaster, panel-to-panel and wall-to-floor changes in plane.
- Metal accents: aluminum profile line delivers edge definition and outdoor tolerance where PVC would be too light.
Where an installation package combines PVC ceiling and wall panels with trims, we coordinate colors and textures so the finished surfaces read as one system. Related panel formats include PVC Ceiling and PVC Wall Panel.
Materials and Critical Specifications
Material choice decides service environment more than appearance does. Rigid PVC suits dry interior work and resists moisture, moths and aging; WPC and SPC angle moulding add impact and wear resistance; 6063 aluminum tolerates humid and exposed conditions when anodized, powder coated, wood-grain transferred or fluorocarbon coated.
Profile dimensions
- Section height and width
- Wall thickness
- Weight per metre
- Length and tolerance
Surface treatment
- Wood grain, stone grain, solid color, imitation metal
- Film wrapping and hot-stamping
- Anodizing, powder and fluorocarbon coating
- Matte, high-gloss and textured finishes
Fastening detail also governs selection. PVC profiles can be bonded or nailed without complex substrate preparation; aluminum profiles accept clip, bond and nail fixing; WPC and SPC angles fix by gluing or clipping. The proposal pairs the fixing method with the substrate and the access available on site.
OEM/ODM: Color, Texture and Packaging
As a Custom Accessories OEM/ODM Suppliers, Factory, Company, we build accessory lines to the distributor's own brand rather than only to a standard catalogue. Custom color matching covers most of the Pantone range; textures can be drawn from wood grain, stone grain, solid color and metal effects; film-wrapped and hot-stamped surfaces let a trim carry a coordinated finish.
- Sample development from a color swatch, reference sample or drawing.
- Profile and length specifications agreed against the panel system.
- Custom packaging and marketing materials for branded programmes.
- Export packing arranged with shipping documents for bulk production.
The Custom Accessories OEM/ODM range runs through sampling, approval, bulk production, inspection and shipment. Approved samples become the production standard, and remaining batches are checked against the retained first-batch sample for appearance, color and texture.
Quality Control and Acceptance
Accessory qualities that cause site failures are color drift, dimensional variation and surface defects. Our quality system covers all three. Incoming resin, additives and decorative films are inspected on arrival for environmental grade and physical strength; patrol checks during extrusion monitor process parameters and surface condition; finished goods pass a standard inspection before packing.
- First-batch sample retention and item-by-item batch comparison for appearance, color and texture.
- Bending test on finished profile, with impact, hardness, wear and dimensional checks.
- Waterproof, flame-retardant, anti-aging and corrosion performance checked for finished goods.
Inspection reports and inspection photos can be provided on request, and final acceptance is carried out against the approved sample and the agreed specification sheet.
Supply Capacity, Packing and Delivery Scope
Our 30,000 m² facility and 30+ production lines support both growing distributors and established programmes, with annual exports of 1,500+ 40HQ containers to Latin America, Africa and Europe. Accessories are manufactured and packed for container shipment alongside panels, which simplifies mixed loads.
| Supply topic |
What we confirm in the order |
| Production capacity |
Line allocation and volume plan against the confirmed order quantity |
| Packing |
Export-standard cartons, bundle length and protective wrapping agreed for the profile type |
| Documentation |
Inspection records, packing list and shipping documents |
| Spare supply |
Repeat orders held to the approved sample and retained color reference |
Information We Use to Configure Your Solution
A department store roll-out, a hotel refurbishment and a distributor's catalogue line each need a different accessory specification. The inputs below are the ones that change the profile, material and packing recommendation.
- Application and junction type: edge, corner, skirting or transition
- Panel thickness, panel width and installed substrate
- Interior or exterior service, humidity and exposure level
- Profile section, length and tolerance required
- Surface treatment, color reference and texture direction
- Fixing method available on site and expected impact loading
- Quantity per profile, order mix and shipment schedule
- Branding, packaging format and required documents
Send a section drawing or site photo where one exists. It shortens the path from requirement to a workable accessory schedule and prevents profile mismatches during installation.
Frequently Asked Questions
Which accessories should accompany a PVC ceiling installation?
An I-shaped or corner PVC profile for the perimeter and panel edges, plus a skirting where the wall meets the floor. Both are available in finishes coordinated with the ceiling surface.
When is aluminum profile line the right choice over PVC?
Aluminum 6063 profiles are selected where the trim needs higher strength, long-term outdoor exposure, glass curtain wall edging or a metal finish. PVC remains the lighter, lower-cost option for dry interior edge finishing.
Can profile color and texture be matched to our branded panel range?
Yes. We match against a Pantone reference, color swatch, or a physical sample of your panel, and support wood grain, stone grain, solid color, imitation metal and film-wrapped or hot-stamped finishes.
What fixing methods do the accessories support?
PVC profiles can be bonded or nailed, aluminum profiles accept clip, bond and nail fixing, and WPC or SPC angle moulding fixes by gluing or clipping. The fixing method is confirmed against the substrate before production.
How do you keep color consistent across repeat orders?
The approved sample becomes the production standard, and the first production batch is retained for comparison. Each later batch is checked item by item against it for appearance, color and texture before delivery.
What is the starting point for an accessory quotation?
Profile type and section, panel thickness, surface finish, quantity per item and packing requirement. A section drawing or reference sample lets us confirm the accessory schedule and prepare a quotation that reflects the full order mix.
Yicheng New Materials Co., Ltd. manufactures Custom Accessories OEM/ODM ranges in Haining, Zhejiang, China, supplying PVC profile, aluminum alloy profile line, angle moulding and baseboard to distributors, importers, contractors and project partners.