6cm Fabric Skirting Boards

Key Advantages

• Fabric-textured surface: Texture depth 0.2–0.4mm, density 15–20 lines/cm, 60° gloss ≤6 GU. Coefficient of friction 0.4–0.6 (Against dry cloth, per GB/T 17657), close to natural fabric.
• Moisture and mold resistance: Water absorption ≤1.5% (24H, 23°C). Per ASTM G21-15, no mold growth after 28 days following mold spore suspension inoculation (Rating 0).
• Impact and abrasion resistance: Unnotched impact strength ≥10 kJ/m² withstands routine cleaning tools and light bumps. Surface abrasion: 500 dry rubs (wool felt, 1000g load) with no coating delamination or visible wear marks.
• Environmental parameters: Formaldehyde emission ≤0.1 Mg/L (desiccator method). No detectable benzene, toluene, or xylene. TVOC ≤0.5 Mg/m²·h (chamber method).
• Visual consistency: No visible color variation along length. Within-piece color difference ΔE ≤0.8; Batch-to-batch ΔE ≤1.5. Pattern transitions at joints appear continuous.

Product Specifications

Application Scenarios

• Wall base finishing in modern minimalist style residential living rooms and bedrooms
• Floor-to-wall transitions in Scandinavian style interiors
• Base trim matching wood floors and wood veneers in natural wood style homes
• Wall base protection and decoration in boutique hotels and premium apartments
• Minimalist wall base detailing in studios, concept stores, and exhibition spaces
• Corner impact protection in children‘s and elderly care rooms

Frequently Asked Questions and Precautions

Q: Is the fabric-textured surface easily scratched by sharp objects?
Surface coating achieves pencil hardness ≥2H, withstanding routine cleaning tools and soft-soled shoe abrasion. Sharp objects (knife tips, key tips) with applied pressure ≥5N may leave indentations or scratches. Avoid placing furniture with sharp metal legs directly against the skirting line, or install transparent corner protectors.

Q: How to clean stains from textured grooves?
A: Routine dust: vacuum with brush attachment or dry soft cloth. Liquid stains (coffee, soy sauce): blot with a slightly damp soft cloth and neutral cleaner within 5 minutes, avoiding lateral wiping that may push stains deeper. For stubborn stains, use a soft toothbrush with neutral cleaner along the texture direction, then blot dry.

Q: Will the surface peel or delaminate after long-term use?
A: Embossed fabric texture with direct coating has no separate lamination layer and carries no peeling risk. For laminated versions (PET/PVC film), cross-cut adhesion test achieves Rating 0 (completely smooth cut edges, no detachment). Under normal conditions, lamination service life ≥8 years.

Q: Is this skirting suitable for rooms with radiant floor heating?
A: Yes. Select WPC (thermal conductivity 0.25–0.35 W/(m·K)) or SPC (0.35–0.45 W/(m·K)) substrates. Leave a 3–5mm expansion gap between skirting bottom and floor during installation. Avoid PVC substrate (softening/deformation risk at prolonged >40°C exposure).

Precautions

• Ensure wall substrate is flat (≤2mm over 2m), dry, and dust-free before installation. Ambient construction temperature ≥5°C, relative humidity ≤80%.
• Store and transport horizontally, avoiding bending or heavy stacking. Storage temperature 0–40°C, away from direct sunlight and heat sources.
• Use fine-tooth saw blades (≥80 teeth) for cutting. Lightly deburr cut ends with 200+ grit sandpaper. Wear a dust mask during cutting.
• Apply adhesive in dots or a wavy pattern on the back (15–20cm spacing). Avoid adhesive squeeze-out onto the fabric-textured face. If squeeze-out occurs, wipe with a damp cloth immediately (before drying).
• For humid environments (bathroom dry areas, kitchens), apply mold-resistant sealant at the skirting-top-wall joint.
• Avoid cleaners containing bleach, strong acids/alkalis, or solvents (e.G., Chlorine bleach, dilute hydrochloric acid, excessive alcohol). Use neutral cleaners (pH 6–8) with soft cloth or sponge.
• Avoid wet mopping or extensive water exposure to walls within 48 hours after installation to allow complete adhesive curing.