Height 1.0cm，140g/m PVC Skirting Board Trims Profiles for Edge Finishing

Key Advantages

• Standardized dimensions: Fixed 1.0 cm height and 140 g/m linear weight ensure consistent profile for field installation.
• Material properties: PVC composition resists humidity and corrosive agents, with low thermal expansion in variable indoor environments.
• Ease of fabrication: Accepts standard cutting tools for length adjustment; No specialized equipment required.
• Surface regularity: Clean-cut edges and a flat surface provide visually continuous transitions after installation.

Product Specifications

Application Scenarios

• Edge finishing between wall panels and plastered walls
• Covering gaps at ceiling perimeters
• Transition covering between different materials (e.G., Tile to painted wall, wood veneer to wallpaper)
• Corner trim for internal or external angles to protect sharp edges
• Gap filling and decoration at cabinet-to-wall junctions

Frequently Asked Questions and Precautions

Q: Can this trim be used on curved walls?
A: The product is supplied as straight strips with a minimum bending radius of approximately 50 cm. For smaller radii, localized heating with a heat gun may be applied, but profile distortion may occur.

Q: What causes edge lifting after installation, and how to fix it?
A: Check substrate flatness. If variation exceeds 2 mm/m, level the surface first. Reapply adhesive and apply pressure for 24 hours to the lifted section.

Q: Is it suitable for outdoor use?
A: No. The product is intended for indoor applications. Prolonged exposure to direct UV or temperatures below -10°C will accelerate aging. Not recommended for facades or uncovered balconies.

Precautions

• Keep cutting edges perpendicular to the length to ensure tight joints.
• Remove dust, oil, and moisture from the substrate before applying adhesive.
• Store horizontally on a dry floor. Do not stack more than 5 layers high to avoid permanent deformation.
• Avoid direct contact with strong solvents (e.G., Thinners, mineral spirits) to prevent surface dissolution or discoloration.