24*24cm PU Corner Decorations

Key Advantages

• 24×24cm medium size, compatible with standard residential and commercial moulding profiles for corner joints
• Corner profile with curved edge transitions and balanced proportions
• PU material provides flexibility, reducing brittleness during installation
• Easy-to-clean surface for simple maintenance
• Moisture resistance: Non-absorbent, no mold growth; Suitable for various indoor environments
• Dimensional stability: No shrinkage, expansion, or cracking
• Strong versatility: Compatible with most standard-size plain mouldings in typical decoration projects

Product Features

Application Scenarios

• Living room ceiling corners (ceiling perimeter corner finishing)
• Corridor waistline corners (wall waistline corner transitions)
• Bedroom accent wall corners (frame corner decoration for accent walls)
• Retail space interior corners (store wall feature corner trim)
• Restaurant and café commercial space corner finishing
• Office and club commercial project corner decoration
• Modern, simple European, and light luxury interior styles
• Versatile corner accessory for residential and commercial decoration

Frequently Asked Questions

Q1: What plain moulding width is the 24×24cm corner decoration compatible with?
The 24×24cm corner decoration is compatible with plain mouldings having a face width not exceeding 24cm, and is especially suitable for common residential sizes such as 8cm, 10cm, and 12.8cm. Verify that the plain moulding face width matches the corner decoration specifications before purchasing.

Q2: How does the corner decoration work with matching plain mouldings?
Join two plain moulding strips at a 90° angle at the corner, and cover the joint with the corner decoration. Align the edges of the corner decoration with the ends of the moulding strips, and use color-matched filler for a clean, low-visibility joint, creating a complete corner trim assembly.

Q3: How are the corner decorations installed?
Apply with specialized PU moulding adhesive or neutral mold-resistant construction adhesive. The substrate must be flat, dry, and free of grease. Apply adhesive evenly to the back of the corner decoration, press into place at the designated corner, ensuring alignment with adjacent plain moulding strips. Use painter's tape for temporary fixing until the adhesive is fully cured.

Q4: Can the product be used in humid environments (bathrooms, kitchens)?
Yes. PU material does not absorb water, does not support mold growth, and does not expand, making it suitable for humid environments such as bathrooms and kitchens. Seal the back and joints to prevent moisture penetration.

Q5: Does the product require painting after installation?
The product comes pre-primed or with a white finish (depending on product series) and is ready to use after installation. For color changes, the surface accepts water-based or polyurethane paints. When painting the 24×24cm medium corner decoration, apply evenly to avoid paint accumulation in carved details.

Q6: What are the main differences between 24×24cm, 15×15cm, and 30×30cm corner decorations?
The 24×24cm is a medium size, offering strong versatility for most standard plain moulding sizes in residential and commercial projects. The 15×15cm is a small size designed specifically for narrow mouldings. The 30×30cm is a large size for wide-profile mouldings. Select based on moulding width and space scale.

Precautions

• Verify substrate flatness and a 90° corner angle (or as designed) before installation; Level corners with significant deviation prior to installation
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; Avoid heavy pressure that may damage carved details
• Cutting: Corner decorations typically require no cutting; Install as complete units. For custom sizing, use fine-tooth saw blades (tooth spacing ≤ 3mm) and apply color-matched paint to cut edges
• Recommended installation ambient temperature: 5°C to 35°C. Avoid low temperatures that may slow adhesive curing
• Apply adhesive evenly to the back of the corner decoration; Press firmly to ensure full contact with substrate and adjacent mouldings. Prevent adhesive from extruding into carved details
• Joint treatment: Fill gaps between corner decoration edges and plain moulding ends with filler, smooth with a damp cloth, and lightly sand with fine sandpaper after drying
• Inspect color and pattern consistency across multiple batches before installation
• Avoid cleaning carved surfaces with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport; Carved details and edges are easily damaged. Avoid impacts
• If repainting, apply paint before installation for complete coverage of carved areas; Touch up joints after installation