38.3*38.3*3.6cm PU Corner Decorations

Key Advantages

• 38.3×38.3cm size, compatible with wide-profile plain mouldings for corner joints
• 3.6cm thickness provides pronounced three-dimensional depth
• Corner profile design with curved, symmetrical edge transitions
• Three-dimensional carved patterns with center symmetry; Adaptable to different corner orientations
• Low-density PU material, lighter than gypsum or wood alternatives
• Moisture and mold resistance: Non-absorbent, no mold growth; Suitable for various indoor environments
• Dimensional stability: No shrinkage, expansion, or cracking

Product Features

Application Scenarios

• Ceiling corner decoration (corner rosettes for ceiling perimeters)
• Accent wall corner decoration (external or internal corner finishing for living room and bedroom accent walls)
• Wall waistline corner transitions (connecting waistline mouldings at wall corners)
• Frame corner rosettes (four-corner decorations for large square or rectangular frame patterns)
• Wainscoting corner decoration (corner pieces for wall panel external corners)
• Door and window header corner decoration (top corner rosettes for door frames and window frames)
• European, light luxury, and neoclassical interior styles
• High-end residential villas, hotel clubs, large showrooms, and sales centers

Frequently Asked Questions

Q1: What plain moulding width is the 38.3×38.3cm corner decoration compatible with?
This corner decoration is compatible with plain mouldings having a face width not exceeding 38.3cm. Verify that the plain moulding face width matches the corner decoration specifications before purchasing.

Q2: How are the corner decorations installed?
Apply with specialized PU moulding adhesive or neutral mold-resistant construction adhesive. The substrate must be flat, dry, and free of grease. Apply adhesive evenly to the back of the corner decoration, press into place at the designated corner, ensuring alignment with adjacent plain moulding strips. Use painter's tape for temporary fixing until the adhesive is fully cured.

Q3: Does the product require painting after installation?
The product comes pre-primed or with a white finish (depending on product series) and is ready to use after installation. For color changes (e.G., Gold, antique colors, wood grain), the surface accepts water-based or polyurethane paints. Apply evenly to avoid paint accumulation in carved details.

Q4: Are there visible gaps between the corner decoration and plain mouldings?
The corner decoration is sized to match the cross-section width of the matching plain moulding series. During installation, align the edges of the corner decoration with the ends of the plain moulding strips. Apply color-matched filler to the joint, allow to dry, and sand smooth for a clean, low-visibility joint.

Q5: Is the 3.6cm thickness suitable for all corner installations?
The 3.6cm thickness provides pronounced three-dimensional depth, suitable for higher ceilings (above 2.8 Meters) or spaces requiring strong decorative depth. For lower ceilings or spaces requiring a thinner profile, select corner decorations with smaller thickness.

Precautions

• Verify substrate flatness and a 90° corner angle (or as designed) before installation; Level corners with significant deviation prior to installation
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; Avoid heavy pressure that may damage carved details
• Cutting: Corner decorations typically require no cutting; Install as complete units. For custom sizing, use fine-tooth saw blades (tooth spacing ≤ 3mm) and apply color-matched paint to cut edges
• Recommended installation ambient temperature: 5°C to 35°C. Avoid low temperatures that may slow adhesive curing
• Apply adhesive evenly to the back of the corner decoration; Press firmly to ensure full contact with substrate and adjacent mouldings. Prevent adhesive from extruding into carved details
• Joint treatment: Fill gaps between corner decoration edges and plain moulding ends with filler, smooth with a damp cloth, and lightly sand with fine sandpaper after drying
• Inspect color and pattern consistency across multiple batches before installation
• Avoid cleaning carved surfaces with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport; Carved details and edges are easily damaged. Avoid impacts
• If repainting, apply paint before installation for complete coverage of carved areas