Space Black Stone Pattern PU Stone Panel

Key Advantages

• Dimensions: 1200×600mm with single panel area of 0.72M², larger than natural stone units, improving installation efficiency
• Two thickness options: 60mm and 80mm, providing different levels of three-dimensional effect
• Weight: PU material density lower than natural stone, reducing wall load requirements
• Surface texture: Mold-cast from natural rock textures, providing consistent grain patterns
• Outdoor weather resistance: UV-resistant, weather-resistant, and resistant to temperature cycling; No fading under long-term outdoor use
• Installation method: Applied with specialized PU stone adhesive; No wet masonry work required

Product Features

Application Scenarios

• Commercial storefronts and exterior walls (retail stores, restaurants, bars, hotel facades)
• Interior feature walls (bar accent walls, entryways, showrooms, clubs)
• Villas and residential (fence walls, exterior wall decoration, entrance backgrounds)
• Social media feature walls (commercial spaces, photo studios, hostels)
• Industrial style spaces (offices, studios, cafes)
• Vintage and light luxury style interiors (accent walls, partial decoration)

Frequently Asked Questions and Precautions

Q1: What are the differences between PU stone panels and natural stone panels?
PU stone panels are significantly lighter than natural stone, imposing lower load requirements on wall structures, eliminating the need for additional structural reinforcement. Surface textures are mold-cast, providing consistent grain patterns, whereas natural stone has unique variations on each piece. PU panels can be cut and machined, and installation efficiency is higher than natural stone masonry.

Q2: How to choose between 60mm and 80mm thickness?
The 60mm thickness is suitable for standard interior walls and exterior walls up to 3 meters in height, providing moderate three-dimensional effect. The 80mm thickness offers deeper shadow effects and stronger three-dimensional texture, suitable for spaces with higher ceiling heights (above 4 meters) or exterior walls requiring greater visual impact.

Q3: How are the panels installed? What auxiliary materials are required?
Apply with specialized PU stone adhesive. The substrate must be flat, dry, solid, and free of grease. Install from bottom to top and left to right, reserving 3-5mm gaps between panels for grouting. Use specialized grout or cement mortar for joints, followed by surface waterproofing treatment.

Q4: Can the product be used for long-term water immersion environments (e.G., Pool surrounds, fountains)?
The product provides water and mold resistance and can be used for pool perimeter walls, fountain background walls, and other non-immersion areas. Long-term immersion is not recommended, as adhesive and grout performance under prolonged water exposure has not been verified.

Q5: How is the surface cleaned? Does it accumulate dust easily?
The surface features stone-like texture with relief patterns that may accumulate dust. Use a soft brush or compressed air (pressure not exceeding 0.3MPa) to remove surface dust. For stubborn stains, use water or neutral cleaner with a soft brush. Avoid steel wool pads or high-pressure water jets at close range.

Q6: What is the product lifespan in outdoor environments?
PU material is formulated with UV stabilizers and anti-aging additives. Under normal outdoor conditions (non-extreme climates), estimated service life is at least 10 years with no significant fading or weathering. Actual lifespan depends on local climate conditions and installation quality.

Precautions:

• Verify substrate flatness before installation: height difference ≤ 5mm when measured with a 2-meter straightedge. Substrate moisture content should be within applicable standards
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation. Keep storage area away from direct sunlight
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) or handheld power saws when cutting; Wear safety goggles and dust masks. Apply color-matched paint to exposed cut edges
• Reserve 3-5mm gaps between panels during installation using cross spacers for uniform joint width. Grout after panels have cured (24 hours)
• Use flexible grout material to prevent cracking due to temperature changes. Apply waterproofing spray to the surface after grouting
• Inspect color consistency across multiple batches before large-scale installation. Slight color variations may exist between PU batches
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport and loading/unloading to prevent edge and corner damage. Use individual packaging or soft interlayer padding between panels
• For outdoor installation, ambient temperature should be between 5°C and 35°C. Avoid installation during rain