595*595mm Square PVC Panel Wall Ceiling

Key Advantages

• Surface density of 2.4kg/m² provides clear reference for transportation and installation load calculations
• Standard 595×595mm size: Compatible with common 600mm module ceiling grid systems (with 5mm expansion gap on each side)
• Dual fixing method compatibility: Supports both clip-in joint and adhesive mounting, suitable for both ceiling and wall applications
• Individual panel replaceability: Each panel can be independently removed for maintenance or replacement
• Dense surface structure: Resists liquid and dust penetration, simplifying cleaning operations

Product Features

Application Scenarios

Ceiling applications:

• Residential (kitchens, bathrooms, balconies, living rooms, corridors)
• Commercial spaces (retail stores, supermarkets, beauty salons, clothing shops)
• Office spaces (open-plan areas, meeting rooms, pantry areas)
• Hospitality (hotel guest rooms, hostels, apartments)

Wall applications:

• Bathroom and kitchen walls (wet area cladding)
• Commercial space accent walls, wainscoting
• Office partition decorative surfaces
• Existing wall renovation covering

Frequently Asked Questions and Precautions

Q1: How does the 595×595mm size match the 600×600mm grid system?
Standard exposed or concealed ceiling grid systems have a mounting center distance of 600mm. The 595mm size provides a 5mm clearance on each side, accommodating thermal expansion and contraction of panels under temperature and humidity changes, while also facilitating placement into the grid framework during installation.

Q2: What are the appropriate applications for clip-in versus adhesive mounting?
Clip-in mounting is suitable for scenarios requiring future access for maintenance or panel replacement (such as ceilings with MEP lines), as individual panels can be independently removed. Adhesive mounting is suitable for wall applications or ceilings with no access requirements and high substrate flatness, offering faster installation speed.

Q3: How is surface flatness controlled after panel installation?
For clip-in mounting, flatness is determined by the grid system. Ensure grid components are on the same horizontal plane, with adjacent grid height difference not exceeding 2mm. For adhesive mounting, control substrate flatness within 3mm measured with a 2-meter straightedge.

Q4: Can a single damaged panel be replaced individually?
Yes. Panels installed with clip-in mounting can be individually removed using suction cups or specialized tools without dismantling surrounding panels. Adhesive-mounted panels are more difficult to replace; for areas requiring potential access, select clip-in mounting.

Q5: How are cut edges finished?
Non-factory cut edges can be covered with matching edge trim or treated with color-matched sealant. For wall installations, cut edges can be hidden beneath adjacent panels or covered with finishing strips.

Precautions:

• Verify substrate flatness and grid levelness before installation
• Storage requirements: Store flat in stacked piles with stack height not exceeding 1 meter; avoid heavy pressure that may cause deformation
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) or score multiple times with a utility knife before snapping to minimize burrs
• For adhesive mounting, use neutral, mold-resistant, PVC-compatible adhesives; avoid solvent-based glues that may corrode PVC
• For installation in wet areas (bathrooms, kitchens), reserve 1-2mm expansion gaps between panels to prevent buckling due to expansion
• Inspect color consistency across multiple batches before large-scale installation
• Avoid using abrasive cleaners or hard brushes on the panel surface
• For light fixtures or equipment installed above the ceiling grid, attach separate hangers or brackets to the grid system; do not fix directly to PVC panels