250*5mm Flat PVC Ceiling, PVC Waterproof Ceiling

Key Advantages

• Surface density of 1.6kg/m² provides clear reference for transportation and installation load calculations
• 250mm width: Reduces the number of seams per square meter by 20% compared to 200mm width products
• 5mm thickness: Balances weight and structural rigidity for standard ceiling spans
• Clip-in joint system: Requires no self-tapping screws or adhesives during installation
• Dense surface structure: Resists liquid and dust penetration, requiring less frequent cleaning than porous materials

Product Features

Application Scenarios

• Residential wet areas (kitchens, bathrooms, balconies)
• Residential dry areas (living rooms, corridors, rental units)
• Commercial spaces (retail stores, supermarkets, beauty salons)
• Office spaces (open-plan areas, pantry areas)
• Hospitality (hotel guest rooms, hostels)

Frequently Asked Questions and Precautions

Q1: How does the 250mm width compare to 200mm width in terms of installation efficiency?
Panels required per square meter: 4 panels/m² for 250mm width versus 5 panels/m² for 200mm width. The 250mm specification reduces the number of joining operations by 20% and reduces total seam length by 20%, making it suitable for large-area continuous ceiling installations.

Q2: Can the 5mm thickness be used for wide framework spacing?
The 5mm thickness is suitable for standard ceiling applications with framework spacing not exceeding 400mm. For spacing exceeding 400mm, consider 6mm or 8mm thickness products to reduce deflection risk.

Q3: Does the wider panel affect cutting flexibility?
The 250mm width can be cut longitudinally on standard table saws or handheld circular saws. For narrow edge finishing where width is less than 250mm, cut panels to the required size.

Q4: Is this product suitable for curved ceilings or walls?
This product is designed as a flat panel with a large minimum bending radius. For curved applications, cut panels into narrow strips (width ≤ 50mm) and install sequentially.

Precautions

• Verify substrate flatness before installation: height difference ≤ 3mm when measured with a 2-meter straightedge
• Storage requirements: Store flat on dry ground with stack height not exceeding 1.2 meters; avoid long-term edge-on storage which may cause panel warping
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) when cutting to minimize edge burrs
• For bathroom ceiling installations, combine with exhaust ventilation system to reduce condensation accumulation on the panel back surface
• Inspect color consistency across multiple batches before large-scale installation to ensure no visible color difference