250*6mm PVC Flat Panel For Ceiling

Key Advantages

• Surface density of 2.0kg/m² provides clear reference for transportation and installation load calculations
• 250mm width: Reduces the number of seams per square meter by 20% compared to 200mm width products
• 6mm thickness: Section modulus higher than 5mm panels, with flexural stiffness approximately 70% greater
• Clip-in joint system: Requires no self-tapping screws or adhesives during installation
• Dense surface structure: Resists liquid and dust penetration, simplifying cleaning operations

Product Features

Application Scenarios

• Residential wet areas (kitchens, bathrooms, balconies)
• Residential dry areas (living rooms, corridors, bedrooms)
• Commercial spaces (retail stores, supermarkets, beauty salons, clothing shops)
• Office spaces (open-plan areas, meeting rooms, pantry areas)
• Hospitality (hotel guest rooms, hostels)

Frequently Asked Questions and Precautions

Q1: How does the 250mm width compare to 200mm width in terms of installation efficiency?
Panels required per square meter: 4 panels/m² for 250mm width versus 5 panels/m² for 200mm width. The 250mm specification reduces the number of joining operations by 20% and reduces total seam length by 20%, making it suitable for large-area continuous ceiling installations.

Q2: What are the main practical differences between 6mm and 5mm thickness?
The 6mm thickness provides flexural stiffness approximately 1.7 times that of 5mm (section modulus is proportional to the cube of thickness). Under identical framework spacing, the 6mm panel exhibits significantly less deflection than the 5mm panel. Additionally, impact resistance is improved with the 6mm thickness.

Q3: What is the recommended framework spacing?
For 6mm thickness, recommended framework spacing does not exceed 500mm. Specific values depend on installation orientation and expected loads. Refer to product test reports or manufacturer installation specifications before installation.

Q4: Does the wider panel affect cutting flexibility?
The 250mm width can be cut longitudinally on standard table saws or handheld circular saws. For narrow edge finishing where width is less than 250mm, cut panels to the required size.

Precautions:

• Verify substrate flatness before installation: height difference ≤ 3mm when measured with a 2-meter straightedge
• Storage requirements: Store flat on dry ground with stack height not exceeding 1.2 meters; avoid long-term edge-on storage which may cause panel warping
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) when cutting to minimize edge burrs
• For bathroom ceiling installations, combine with exhaust ventilation system to reduce condensation accumulation on the panel back surface
• Inspect color consistency across multiple batches before large-scale installation to ensure no visible color difference
• Avoid cleaning with solvents containing acetone, benzene, or strong alkaline agents