2-3mm PVC UV Board, UV High Gloss Board

Key Advantages

• Thin profile: 2-3mm thickness reduces panel weight for easier cutting and transport
• UV high-gloss curing process: creates a dense hardened layer with consistent flatness and gloss
• Water, moisture, mold, and insect resistant: non-absorbent, no nutrient source for microorganisms, pest-resistant
• Scratch and wear resistant: UV coating withstands minor scratches from daily use
• Easy to clean: smooth surface repels dirt; clean with a damp cloth
• Color stable: UV curing process seals the color layer, resisting fading or yellowing
• Odorless and non-toxic: no formaldehyde or benzene compounds added
• Variety of patterns: wood grain, solid colors, marble effect, and other designs available

Product Features

Applications

• Residential accent walls: TV background walls, sofa background walls, bedroom headboard walls
• Whole-house interior walls: entryways, corridors, dining room walls
• Hotel projects: guest room headboard walls, corridor walls, elevator lobby accents
• Commercial spaces: retail display backgrounds, brand store walls, exhibition panels
• Office spaces: office background walls, meeting room walls, reception feature walls
• Other venues: restaurants, coffee shops, beauty salons, club interior walls

FAQ and Precautions

Q: What is the difference between the 2-3mm UV board and standard PVC wall panels (e.g., 8-10mm thickness)?
A: The 2-3mm UV board is a thin panel, lighter in weight, suitable for applications with strict thickness constraints (e.g., existing flat walls where minimal added thickness is desired). Standard thicker panels (8-10mm) offer higher impact resistance and better sound/thermal insulation. Both can be selected or combined based on project requirements.

Q: Does the UV high-gloss surface show fingerprints easily?
A: The high-gloss surface may show fingerprints after contact. These can be wiped off with a soft cloth. Anti-fingerprint coating options may be available for some product lines.

Q: Can it be used in humid environments such as bathrooms or kitchens?
A: The product has a sealed surface and offers water and moisture resistance. It can be used in bathroom dry areas and kitchen walls. For shower interior walls, sealing at the joints is recommended.

Q: Will the UV layer peel off if scratched?
A: The UV coating is bonded tightly to the substrate. Minor scratches will not cause the coating to peel in sheets. If a scratch penetrates the UV layer, the damage is limited to the scratch line and does not spread.

Q: Will the panels yellow over long-term use?
A: The UV curing process provides UV resistance. Under normal indoor lighting conditions, the yellowing rate is low. Prolonged exposure to direct strong sunlight or high temperatures may cause slight color temperature shift.

Precautions

• Check substrate flatness before installation. The 2-3mm thin panel requires a flat substrate (recommended deviation ≤2mm over 2 meters) to avoid a wavy appearance.
• Use a fine-tooth saw blade (60+ teeth) or CNC router for cutting to avoid chipping at edges.
• Use neutral eco-friendly adhesives (e.g., MS adhesive, PVC-specific adhesive). Avoid solvent-based adhesives containing toluene or xylene, which may damage the UV coating or substrate.
• Clean with a soft cloth and neutral detergent. Avoid abrasive cleaners, steel wool, or strong acids/alkalis.
• Store panels flat with stack height not exceeding one meter. Avoid heavy pressure or scratches from sharp objects.
• Protect panel surfaces and edges during transport. High-gloss UV surfaces are sensitive to scratches.
• Avoid using transparent adhesive tape for temporary fixing on the panel surface, as residue may damage the UV coating.
• For wall installations, allow appropriate expansion gaps. Although thin panels have minimal thermal expansion, follow product instructions for gap spacing in large-area installations.