5,8mm Metallic Film Wood Veneer, Wall Wood Veneer Panels, Decorative Veneer Panels

Key Advantages

• Metallic film surface: provides metal-like gloss and reflective effect with uniform surface texture
• Two thickness options: 5mm and 8mm to accommodate different project requirements for strength and cost
• High-density substrate: structural durability meets impact resistance requirements for daily use
• Water and moisture resistant: non-absorbent material suitable for various indoor environments
• Wear and scratch resistant: surface withstands daily wiping and minor scratches
• No peeling or fading: stable adhesion between metallic film and substrate; long color retention
• Convenient installation: standard panel dimensions; adhesive or dry-hanging installation
• Formability: panels can be cut, routed, and bent (bending radius depends on thickness)

Product Features

Applications

• Modern light luxury style walls: living rooms, bedrooms, dining room accent walls
• Minimalist style spaces: open-plan offices, display spaces, boutique store walls
• Feature partitions: indoor partial-height partitions, entryway dividers, space-dividing decorative walls
• Accent walls: TV background walls, sofa background walls, bedroom headboard walls, reception background walls
• Commercial spaces: brand retail stores, exhibition halls, coffee shops, bar interior walls
• Office spaces: reception areas, meeting rooms, executive office walls
• Other venues: hotel guest rooms, clubs, sales centers, showrooms

FAQ and Precautions

Q: Is the metallic film actual metal or metal-effect?
A: The metallic film is a composite metal foil or metalized PET film with metal-like texture and reflective properties. It is not solid metal but visually resembles brushed or mirror metal finishes. Refer to product specifications for specific material composition.

Q: How to choose between 5mm and 8mm thickness?
A: The 5mm thickness is lighter and suitable for feature partitions, curved walls, or weight-sensitive applications. The 8mm thickness provides higher structural rigidity and impact resistance, suitable for large wall areas, high-traffic spaces, or projects requiring greater panel strength.

Q: Does the surface show fingerprints easily?
A: Fingerprint visibility depends on surface gloss. Gloss finishes show fingerprints more clearly, while matte finishes minimize visibility. Anti-fingerprint coating options may be available. Daily fingerprints can be wiped off with a soft cloth.

Q: Will the metallic film layer oxidize or rust?
A: The metallic film undergoes anti-oxidation treatment and does not oxidize under normal indoor conditions. Avoid prolonged exposure to high humidity, salt spray, or acidic/alkaline environments (e.g., pool areas, chemical laboratories).

Q: Can it be used on curved walls?
A: The 5mm thickness has defined bending capability for large-radius curved walls (recommended bending radius ≥1000mm; testing required). The 8mm thickness is not recommended for bending. For small-radius curves, custom curved panels or flexible metallic finish products should be used.

Precautions

• Check substrate flatness, dryness, and cleanliness before installation. Recommended deviation ≤3mm over 2 meters.
• Use a fine-tooth saw blade (60+ teeth) or CNC router for cutting. Cut from the metallic film side to avoid lifting or tearing the film edge.
• Cut edges may expose the substrate. Use matching edge banding, metal trim, or U-shaped edging to cover cut edges.
• Use neutral eco-friendly adhesives (e.g., MS adhesive, wood veneer-specific adhesive). Avoid solvent-based adhesives containing toluene or xylene that may damage the metallic film.
• Clean with a soft cloth and neutral detergent. Avoid steel wool, stiff brushes, abrasive cleaners, or strong acids/alkalis.
• Store panels flat with stack height not exceeding one meter. Place metallic film side facing upward. Avoid heavy pressure or scratches from sharp objects.
• Protect panel surfaces and edges during transport. Avoid impact that may lift or scratch the metallic film edge.
• For large-area wall installations, allow expansion gaps as per product instructions (2-3mm gaps per 5 meters recommended).
• Avoid using transparent adhesive tape for temporary fixing on the metallic film surface, as residue may damage the film or leave marks.
• For feature partition applications, ensure proper edge finishing to avoid metallic film exposure in high-contact areas.