1.2m*3m Velvet wall sticker

Core Advantages

• Simulated velvet texture: Presents velvety fabric touch, visually and tactually close to real velvet fabric
• Large single‑panel size: 1.2M×3m dimension reduces joint seams on single wall surface
• Moisture‑proof & mildew‑resistant: Special treated material inhibits mildew growth under normal indoor humidity
• Fine crack covering: Flexible material conceals minor irregularities and hairline cracks of wall substrate
• Smooth finishing after installation: Good flexibility helps achieve flat surface, minimizing air bubbles and wrinkles

Product Specifications

Application Scenarios

• Full walls or partial feature walls in residential living rooms
• Bedhead walls or opposite walls in bedrooms
• Entryway interior walls
• Interior walls of hotel guest rooms
• Public areas and guest rooms of homestays
• Walls for individual work zones or lounge areas in offices

FAQ & Troubleshooting
Q1: Does velvet surface tend to collect dust?
A: Texture depth is controlled within 0.2 mm. Loose indoor dust can be removed with feather duster or dry cloth. Deep‑seated dust can be cleaned by vacuum cleaner with soft brush attachment.
Q2: How to handle slight wrinkles after application?
A: If wrinkles occur while adhesive is still wet, smooth out from center toward edges with scraper. If adhesive is fully cured, spray small amount of water locally to soften material then re‑smooth.
Q3: Is it suitable for families with kids or pets?
A: The surface owns certain tensile strength to withstand minor daily scratches. It is recommended to install corner guards at high‑contact positions such as wall corners and door edges to lower physical damage.
Q4: Will seams curl after long‑term usage?
A: Seam curling is mostly caused by insufficient glue or poor substrate preparation. Use dedicated wallpaper adhesive and ensure even glue application along seams. Re‑apply glue locally and press firmly with roller for curled seams.

Installation & Usage Precautions

• Ensure wall surface is flat, dry and dust‑free before installation. Wallpaper primer is recommended for substrate sealing.
• Apply special wallpaper adhesive, mix viscosity strictly following product instructions.
• Paste from top to bottom, smooth from center to both sides to squeeze out air bubbles.
• Keep good indoor ventilation within 24 hours after installation. Avoid direct strong wind which causes uneven fast drying.
• Clean with dry cloth or slightly damp soft cloth. Do not use bleach‑containing detergents.
• Avoid prolonged direct sunlight on the same area to slow down color change.