200*6mm Flat PVC Ceiling, Wall PVC Ceiling Sheet

Key Advantages

• Surface density of 2.0kg/m² provides clear reference for transportation and structural load calculations
• 6mm thickness offers higher section modulus compared to thinner panels, improving bending stiffness
• Clip-in joint system requires no specialized tools, enabling standardized installation procedures
• Non-porous surface reduces stain penetration, shortening cleaning time per cycle

Product Features

Application Scenarios

• Residential full-house ceilings (living rooms, bedrooms, dining areas)
• Humid environments (kitchens, bathrooms, laundry rooms, shower areas)
• Commercial spaces (retail stores, supermarkets, beauty salons, clothing shops)
• Office spaces (open-plan areas, corridors, pantry areas)
• Hospitality (hotel guest rooms, hostel common areas)
• Public facilities (hospital waiting areas, school corridors, community center rooms)

Frequently Asked Questions and Precautions

Q1: What are the practical differences between 6mm and 5mm thickness panels?
The 6mm thickness provides higher flexural stiffness and impact resistance, making it suitable for wider framework spacing or areas subject to light impacts (such as corridors or children‘s activity areas). Under identical installation conditions, the 6mm panel exhibits lower deflection than the 5mm panel.

Q2: Is this product suitable for large continuous ceiling areas?
Yes. The flat, edgeless design allows tight joints to form a continuous surface. Follow installation guidelines to incorporate expansion gaps or use compatible trim pieces to accommodate thermal expansion and contraction due to temperature and humidity changes.

Q3: How should framework spacing be determined?
Refer to the product installation instructions for maximum recommended spacing based on panel thickness. Generally, 6mm thickness supports wider framework spacing than 5mm thickness; specific values should be based on manufacturer test data.

Q4: Can steam cleaners be used for cleaning?
Steam cleaning is not recommended. The Vicat softening temperature of PVC material is approximately 70-80°C. High-temperature steam may cause localized softening or deformation. Use room temperature water or neutral detergent with a soft cloth.

Precautions

• Ensure the substrate is dry, flat, and free of grease before installation
• Store panels flat with stack height not exceeding 1 meter; avoid heavy pressure that may cause permanent deformation
• Wear protective eyewear when cutting panels to prevent debris contact
• For wall covering applications, verify that the vertical attachment method and framework system are compatible