200*6mm Recessed PVC Ceiling, PVC Ceiling Flat Panel - V Sewing

Key Advantages

• Surface density of 2.1kg/m² provides a defined reference value for load calculations
• V-groove design: Creates uniform V-shaped recesses between panels, enhancing ceiling line definition
• 6mm thickness: Higher section modulus compared to thinner panels, improving bending resistance
• Clip-in connection: Requires no specialized pressing tools during installation
• Dense surface structure: Resists liquid and dust penetration, extending cleaning intervals

Product Features

Application Scenarios

• Residential wet areas (kitchens, bathrooms, balconies)
• Residential dry areas (living rooms, corridors, dining rooms)
• Commercial spaces (retail stores, beauty salons, clothing shops)
• Office spaces (open-plan areas, meeting rooms, pantry areas)
• Hospitality (hotel guest rooms, hostel common areas, corridors)
• Public facilities (hospital corridors, school restrooms, community centers)

Frequently Asked Questions and Precautions

Q1: Are the V-groove width and depth consistent across panels?
The V-groove dimensions are determined by the extrusion mold, ensuring consistent groove geometry across production batches. The resulting gap width and depth are uniform after joining, requiring no manual adjustment.

Q2: Does the V-groove accumulate dust easily?
The V-shaped groove has an opening angle greater than 90 degrees, which reduces dust retention. During routine cleaning, a soft brush or dry cloth swept along the groove direction removes accumulated dust.

Q3: Does the 6mm thickness allow wider framework spacing?
The flexural stiffness provided by the 6mm thickness permits wider framework spacing compared to thinner panels. Refer to the product installation instructions or test report for maximum recommended spacing values, and follow manufacturer specifications.

Q4: Can this product be used for curved or shaped ceilings?
This product is designed as a flat panel and does not support on-site heat bending. For curved ceiling applications, consider cutting panels into narrower strips for sequential assembly or use dedicated curved PVC panels.

Precautions

• Check substrate flatness before installation; level any surface deviations exceeding 2mm per linear meter
• Store panels flat on dry ground with stack height not exceeding 1.2 meters; avoid placing heavy objects on stored panels
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) when cutting to minimize edge burrs
• For bathroom ceiling installations, combine with an exhaust ventilation system to reduce condensation risk on the panel back surface under prolonged high-humidity conditions
• Maintain consistent V-groove orientation during installation; avoid mixing panels from different production batches to prevent groove dimension variations