400*6mm PVC Wall Cladding Sheets, Waterproof Wall Panels For Kitchen

Key Advantages

• Surface density of 4kg/m² provides clear reference for transport and wall load calculations
• 400mm width: Requires 2.5 panels per square meter, offering higher installation efficiency than narrower wall panels
• 6mm thickness: Provides flexural stiffness, maintaining panel flatness under vertical installation
• Water and moisture resistance: No expansion or delamination in wet wall environments
• Installation method: Dry installation using clip-in or tongue-and-groove system; no wet trades required

Product Features

Application Scenarios

• Residential walls (living rooms, bedrooms, corridors, accent walls)
• Residential wet areas (kitchen splashback areas, bathroom dry zones)
• Hospitality (hotel guest rooms, hostel interior walls)
• Office spaces (office partition walls, meeting rooms, corridors)
• Commercial spaces (retail stores, beauty salons, clothing shops, restaurants)

Frequently Asked Questions and Precautions

Q1: How does the 400*6mm wall panel compare to traditional tiles or painted walls?
Wall panels use dry installation with no cement mortar or painting required, resulting in shorter installation time. The PVC surface provides water resistance and can be cleaned with a damp cloth. The 6mm thickness refers to the panel's own structural thickness, excluding any framework or leveling layer.

Q2: Can the wall panels be installed directly onto existing walls?
Yes, provided the substrate is dry, flat, solid, and free of grease, with height difference not exceeding 3mm when measured with a 2-meter straightedge. For existing tiled, painted, or wallpapered surfaces, evaluate adhesion and prepare accordingly. For flat substrates, direct installation is recommended; for uneven substrates, install leveling battens first.

Q3: How are panel joints treated?
Tongue-and-groove joints result in natural panel fit with joint width approximately 0.5-1mm. For fully sealed applications, use color-matched sealant to fill joints. Use compatible internal and external corner trims for wall corners.

Q4: Can the panels be used in shower area walls?
Panels are suitable for dry zones in bathrooms with wet/dry separation. For wet areas (shower zones), ensure joints are sealed with mold-resistant sealant and maintain ventilation with exhaust systems to prevent prolonged water accumulation at joints.

Q5: Will the panel surface pattern fade?
The surface pattern layer is UV-resistant, with color fastness depending on specific manufacturing process and test standards. For interior walls without direct sunlight exposure, color difference remains within acceptable range over long-term use. For walls with strong sunlight exposure (windows), use window coverings.

Q6: What are the handling characteristics of 400mm width panels?
Individual panel width is 400mm, with standard lengths typically 2.6-3.0 meters. Two-person handling is recommended to prevent bending deformation under self-weight. Store panels flat with stack height not exceeding 1 meter.

Precautions:

• Verify substrate flatness and dryness before installation; moisture content should be within applicable standards
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; avoid edge-on storage or heavy pressure
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) or score multiple times with a utility knife when cutting; cover cut edges with trim pieces
• For kitchen wall installations, maintain minimum distance of 300mm from cooking appliances to avoid direct high-temperature exposure
• Reserve 3-5mm expansion gaps between panels and floor/ceiling; cover with baseboards or finishing strips
• Inspect color consistency across multiple batches before large-scale installation
• Avoid using abrasive cleaners, steel wool pads, or hard brushes on the panel surface
• For hanging heavy objects (cabinets, shelving units) on walls, install anchors into the substrate wall; do not fix directly to PVC wall panels