70cm*275cm Colorful Linen Fabric Wall Stickers

Key Advantages

• Linen texture with pearlescent coating: Natural fiber grain with color variation under changing light angles
• Self-adhesive backing: Adhesive layer pre-applied; Remove release liner and apply directly without drilling or additional glue
• Drill-free installation: No impact drill or screws required; Leaves no holes in the wall
• Water and moisture resistance: Surface treated for humidity exposure and light water wiping
• Sound absorption: Fiber layer reduces reflection intensity of mid-to-high frequency sounds
• Flexibility: Material can bend to fit slightly curved or arched walls

Product Features

Application Scenarios

• Living room TV background or sofa background walls
• Headboard walls or opposite walls in bedrooms
• Hallway or corridor walls
• Store display walls or product showcase areas
• Homestay guest rooms or common area decorative walls
• Quick wall renovation for rental apartments

Common Questions and Solutions

Q1: Can the self-adhesive sticker be applied directly to painted drywall?
Solution: Yes, provided the painted surface is free of peeling, chalking, or visible oil stains. Touch the wall with a palm to confirm no powder or loose paint. If the paint layer is aged and loose, remove the loose layer and apply a primer before installation.

Q2: How to remove bubbles after application?
Solution: For small bubbles, puncture with a fine needle and smooth with a squeegee. For larger bubbles that have not fully adhered, lift the sticker back to the bubble area and reapply. For fully adhered bubbles, apply heat to soften the material before smoothing.

Q3: Can the sticker be reused?
Solution: This product is designed for single installation. After removal, adhesive strength decreases, and second-time adhesion is lower than the initial application. For replacement, use a new sticker.

Q4: Is the product suitable for bathrooms or kitchens?
Solution: The product offers water and moisture resistance and can be used on dry-area bathroom walls and non-kitchen areas away from the stove. Installation in shower areas, above bathtubs, or directly behind cooking ranges with prolonged water or grease exposure is not recommended.

Installation and Usage Notes

• Clean the wall surface before installation to remove dust, grease, and loose coatings
• Ensure the wall is dry; Relative humidity below 80% is recommended
• During application, peel the release liner from one end while smoothing with a squeegee
• For corners or switch outlets, apply the main area first, then trim excess material with a utility knife
• Avoid heavy scratching or water exposure within 24 hours after installation
• For daily cleaning, use a dry or slightly damp soft cloth. Avoid solvent-based cleaners
• For removal, heat the sticker surface with a heat gun or hairdryer and peel slowly to minimize residual adhesive