23*49cm Soft Wall Panel

Key Advantages

• Impact cushioning: Internal layer absorbs impact force, reducing injury risk from wall collision
• Sound absorption: Soft porous structure absorbs some mid-to-high frequency sound, reducing echo and reverberation
• Stain treatment: Fabric surface treated to resist liquid stain penetration
• Abrasion resistance: Surface friction resistance meets daily use requirements
• Moisture resistance: Material does not deform or support mold growth under normal humidity
• Anti-pilling and anti-deformation: Fiber structure treated to limit pilling from friction; Filling layer maintains rebound over time

Product Features

Application Scenarios

• Bedroom headboard walls
• Living room TV background walls
• Wall behind sofas in living rooms
• Private room walls in clubs or VIP lounges
• Impact protection walls in children's rooms (around beds or play areas)
• Protective walls in hallways or bedrooms of senior care facilities
• Auxiliary sound absorption in home theater rooms

Common Questions and Solutions

Q1: Are seams visible when multiple panels are installed together?
Solution: The panels have straight edges for butt joints. Use a level to ensure all panels are on the same plane during installation, with seam gaps控制在控制在1mm以内. Seams can be finished with color-matched caulk or trim strips.

Q2: How to treat stains on the soft panel surface?
Solution: For fresh stains, blot immediately with a dry cloth. For dried stains, apply diluted mild detergent with a damp soft cloth, then blot dry with a dry cloth. Avoid bleach or alcohol-based cleaners.

Q3: Is the product suitable for rooms with underfloor heating?
Solution: Yes, but maintain a minimum distance of 10cm between the panel and the heat source (floor). Temperatures near floor level may reach 40-50°C due to rising warm air, which can accelerate aging of the filling layer over time.

Q4: Is the Soft Wall Panel fire-resistant?
Solution: The fabric and filling layer are treated to meet basic flame retardant requirements for wall covering materials. Specific fire rating parameters should be referenced from the product test report. Avoid installing near open flames or covering electrical switches.

Installation and Usage Notes

• Ensure the wall surface is flat, dry, and free of dust before installation. Use a laser level to mark reference lines
• Use eco-friendly structural adhesive or specialized soft panel glue, applying to the four corners and edges of the back of each panel
• Install panels one by one, pressing each for 10–15 seconds after positioning to ensure adhesion
• Leave 2–3mm expansion gaps between panels and ceiling or floor
• Avoid pressing or impacting the panels within 24 hours after installation
• For daily cleaning, use a vacuum cleaner with a soft brush attachment or a slightly damp soft cloth
• Avoid piercing or scratching the fabric surface with sharp objects
• For replacement of a single panel after long-term use, gently pry from the edge with a putty knife, remove residual adhesive, and install a new panel