20*20mm Fabric-Textured Wood-Plastic Right-Angle Moulding

Key Advantages

• Surface texture: Embossing depth of 0.3–0.5mm with texture density ≥12 lines/cm, providing a fabric-like tactile experience. Diffuse reflection is approximately 40% lower than smooth surfaces, resulting in softer visual appearance.
• Dimensional stability: Linear expansion coefficient ≤3.5×10⁻⁵/℃, Superior to conventional PVC mouldings (approx. 8×10⁻⁵/℃). Under 15℃ temperature variation and 30% RH change, dimensional change ≤0.3mm over 24 hours.
• Biological resistance: Wood fiber is fully encapsulated by plastic matrix with internal porosity ≤2%, unsuitable for termites or mold growth. Mold resistance rating of 0 (no growth) per ASTM G21-15.
• Environmental parameters: Formaldehyde emission ≤0.1 Mg/L (desiccator method), below E₀ class limit (0.5 Mg/L). No benzene series or heavy metal additives.
• Mechanical toughness: Unnotched impact strength ≥12 kJ/m². No fracture under 1kg hammer dropped from 300mm height.

Product Specifications

Application Scenarios

• Interior wall corner protection (residential hallways, children‘s rooms, elderly care rooms)
• Edge finishing for wall panels and integrated wall cladding
• Decorative cove lines at gypsum board ceiling-to-wall junctions
• Edge wrapping for exposed corners of cabinets and bookcases
• Wall color transition lines in modern minimalist and light-luxury interior styles
• Corner decoration and protection in hotel guest rooms and finished apartments

Frequently Asked Questions and Precautions

Q: Does the fabric texture accumulate dust easily? How to clean it?
A: With texture depth of 0.3–0.5mm, routine indoor dust does not significantly accumulate. Clean using a soft brush or slightly damp microfiber cloth wiped along the texture direction. Avoid pressure washers or stiff bristle brushes to prevent texture damage.

Q: Can this product be used in bathrooms or balconies?
A: Yes. Water absorption ≤1.5% (24-Hour immersion). Suitable for bathroom walls (non-shower areas) and balcony walls. Avoid prolonged immersion in standing water or direct use on shower floor edges.

Q: Are custom colors available?
A: Standard colors include natural linen, light gray fabric, and off-white fabric. Other colors can be achieved by adding color masterbatch to the formulation, with typical MOQ of 500–1000 linear meters. Powder coating overpainting is possible but may reduce fabric texture feel.

Q: Can this rigid right-angle moulding be used on non-90° corners?
A: This rigid profile is designed for wall corners within 90° ± 2°. Beyond this range, one side will exhibit gaps. For non-standard angles, use flexible mouldings or install with custom-cut wedge shims.

Precautions

• Ensure substrate flatness deviation ≤2mm over 2m length before installation. Surfaces must be free of dust, oil, and loose coatings.
• For ceiling cove applications, use sag-resistant neutral structural adhesive and provide temporary support for 24 hours.
• Use fine-tooth saw blades (≥60 teeth) for cutting to avoid edge chipping. Treat cut ends with matching color repair pen.
• Avoid prolonged exposure to heat sources above 80°C (e.G., Direct proximity to space heaters), which may cause surface softening or deformation.
• Store horizontally in dry, ventilated conditions away from direct sunlight. Stack height ≤1.2M with separators between layers.
• Avoid wiping with solvent-based cleaners (e.G., Alcohol, thinners) within 48 hours after installation to prevent surface damage.