Fabric-textured Flexible Clay Cladding

Key Advantages

• Flexible and bendable: The material bends to fit curved walls with a minimum radius suitable for common curved structures
• Lightweight: Lower weight per unit area compared to natural stone and ceramic tiles, reducing structural load requirements
• Combined fabric and stone texture: Surface presents both stone base texture and woven fabric grain lines
• Multiple installation methods: Supports adhesive application, dry-hanging, and composite installation with insulation
• Weather resistance: Maintains structural stability outdoors with extended aging resistance
• Fire resistance: Meets basic flame retardant standards for wall covering materials

Product Features

Application Scenarios

• Residential exterior walls
• Interior accent walls (TV backgrounds, sofa backgrounds)
• Curved walls and column cladding
• Irregular ceiling decoration
• Entryways and hallway walls
• Hotel lobby and guest room walls
• Office building lobbies and elevator bays
• Exhibition booth display walls
• Villa courtyard walls or landscape features
• Exterior wall renovation cladding
• Walls of fabric-themed restaurants, clothing stores, or soft furnishing showrooms

Common Questions and Solutions

Q1: Does the fabric texture on the surface affect cleaning difficulty?
Solution: The fabric texture consists of shallow embossed lines with a depth controlled between 0.3–0.5mm. Routine dust can be removed with a vacuum cleaner and soft brush attachment. Liquid stains can be cleaned by spraying mild detergent and wiping with a soft cloth.

Q2: Can flexible clay cladding be used in areas with standing water or continuous humidity?
Solution: The material offers moisture resistance and can be used on exterior walls and dry-area interior walls. Installation in areas with standing water, continuous water flow (e.G., Fountain inner walls), or below water level is not recommended.

Q3: Does the material fade when used outdoors?
Solution: UV-resistant additives are incorporated into the material, resulting in slower fading compared to untreated decorative materials. Under direct outdoor sunlight, color changes typically become noticeable after 3-5 years, depending on local UV intensity.

Q4: Can fabric-textured flexible clay cladding be applied directly over existing ceramic tiles?
Solution: Yes, provided the existing tile layer is firmly attached, free of hollow sounds, and clean. Apply a specialized primer to the tile surface before applying adhesive to improve bonding strength.

Q5: Is fabric-textured cladding suitable for high-contact areas in commercial spaces?
Solution: The surface is treated for abrasion resistance and can withstand routine use including touch and cleaning tool contact. For high-friction areas such as walls near doorways or below handrails, install corner guards or wall protection panels to extend service life.

Installation and Usage Notes

• Check substrate flatness before installation. Areas with height deviations exceeding 3mm per 2 meters must be leveled first
• For outdoor installation, ambient temperature should be between 5°C and 35°C. Avoid working in rain or strong wind
• Use dedicated flexible clay cladding adhesive. Mix with water according to manufacturer instructions and allow to rest for 5–10 minutes before use
• Apply adhesive using double-sided coating method (substrate + panel back). Use a notched trowel to create adhesive ridges
• Press each panel into place or tap gently with a rubber mallet to ensure full adhesive coverage without hollow areas
• Leave 2–5mm joints and use flexible grout material
• Avoid water exposure or impact to the panel surface within 24 hours after installation
• Use a tile cutter or angle grinder with a fine-tooth blade for cutting. Mark cut lines on the back of the panel
• Store panels flat in stacks, avoiding heavy pressure or bending