Wood Grain Embossed Aluminum Alloy Flooring, Outdoor Aluminum Composite Decking - Gray

Key Advantages

• Aluminum alloy substrate: Lightweight yet high-strength with density of approximately 2.7G/cm³, providing higher strength than wood-plastic and wood flooring
• Gray wood grain embossed finish: Gray tone suitable for modern minimalist and industrial interior styles
• Moisture and corrosion resistance: Zero water absorption with no rotting or insect infestation
• Aging resistance: UV-stabilized coating provides no fading or chalking under prolonged sunlight exposure
• High and low temperature resistance: Maintains physical property stability from -40°C to 80°C
• Slip and scratch resistance: Embossed surface texture increases coefficient of friction; High surface hardness resists daily scratching
• Easy cleaning: Rinse with water or wipe with a damp cloth

Product Features

Application Scenarios

• Modern minimalist courtyard ground (residential courtyards, rooftop gardens)
• Industrial-style courtyard ground (industrial-style terraces, outdoor leisure areas)
• Villa balcony floors (open and semi-enclosed balconies)
• Commercial walkway floors (shopping mall, office building, hotel outdoor corridors)
• Outdoor leisure platforms (hostel, cafe, restaurant outdoor areas)
• Pool surrounds (high slip-resistance areas around swimming pools)
• Landscape pathways (pedestrian pathways in parks and scenic areas)

Frequently Asked Questions

Q1: What is the difference between gray wood grain aluminum flooring and brown wood grain aluminum flooring?
The substrate and performance parameters are identical; The primary difference is surface color. Gray tones suit modern minimalist and industrial styles, while brown tones suit natural, rustic, and traditional styles. Selection is based on interior design requirements.

Q2: How is the flooring installed?
Installation is similar to wood-plastic flooring. Install joists (aluminum or galvanized steel) first, with recommended joist spacing not exceeding 400mm. Secure flooring boards to joists using clip-in joints or screws. Reserve 3-5mm gaps between boards for drainage and thermal expansion.

Q3: Does the aluminum flooring surface become too hot under summer sunlight?
Aluminum has higher thermal conductivity, resulting in higher surface temperatures than wood-plastic or wood flooring under direct sunlight. Gray tones absorb less heat than darker colors (such as brown or black), but shading is still recommended for high-sun areas, or select lighter color products.

Q4: Does the product surface rust?
Aluminum alloy substrate does not rust. The coated surface (anodized or fluorocarbon) provides additional protection. The gray coating remains stable over long-term use. If the coating is damaged, exposed aluminum forms a protective oxide layer and does not produce red rust.

Q5: How is the flooring cleaned and maintained?
Routine cleaning uses sweeping or water rinsing. For stubborn stains, use a neutral cleaner with a soft brush. Avoid steel wool pads or acid/alkaline cleaners. No painting, waxing, or sealing is required.

Q6: Can the product be used in coastal areas (high salt-spray environments)?
Yes. Aluminum alloy substrate provides inherent salt-spray resistance, and the fluorocarbon coating further enhances corrosion protection. Use stainless steel hardware and aluminum joists. Suitable for beachfront villas, coastal commercial areas, and similar applications.

Precautions

• Verify that joists are level and secure before installation; Joist spacing not exceeding 400mm. Aluminum flooring is heavier than wood-plastic flooring; Joists must have adequate load-bearing capacity
• Storage requirements: Store flat on dry, level ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation or coating scratches
• Use aluminum-specific saw blades (tooth spacing ≤ 3mm, negative rake angle) when cutting; Wear safety goggles, hearing protection, and gloves. Apply edge trim or color-matched paint to cut edges
• Recommended installation ambient temperature: 5°C to 35°C. Aluminum has high thermal conductivity; Take care to prevent slipping during low-temperature installation
• Pre-drill holes when using screws; Use stainless steel self-tapping screws to prevent galvanic corrosion
• Reserve 3-5mm gaps between boards for thermal expansion
• Inspect color consistency across multiple batches before large-scale installation; Gray products may have color temperature variations between batches (cool gray vs. Warm gray)
• Avoid cleaning with strong acids, strong alkalis, or organic solvents that may damage the surface coating
• Handle carefully during transport to prevent deformation or coating damage from impacts
• Board surface temperature may rise under summer sunlight exposure; Take protective measures during installation and maintenance
• The ground surface below the flooring should have a drainage slope (minimum 1% recommended) to prevent prolonged water accumulation