Wood Grain Embossed Aluminum Alloy Flooring, Outdoor Aluminum Composite Decking - Brown

Key Advantages

• Aluminum alloy substrate: High structural strength with superior load-bearing and compression resistance compared to wood-plastic and wood flooring
• Non-rotting: Metal material does not absorb water, does not rot, and resists insect infestation
• Water and slip resistance: Embossed surface texture increases coefficient of friction; Drainage holes/slots (depending on specific design)
• Fire resistance: Non-combustible metal substrate with Class A fire rating (per test report)
• Rust and weather resistance: Coated surface provides UV and salt-spray corrosion resistance
• Scratch and abrasion resistance: High aluminum surface hardness resists daily wear and scratching
• Color fastness: UV-stabilized coating or pigmentation provides stable color under prolonged sunlight exposure
• Maintenance-free: No painting or sealing required; Rinse with water for cleaning

Product Features

Application Scenarios

• Courtyard terraces (villa and residential outdoor terraces)
• Balcony floors (open and semi-enclosed balconies)
• Corridor floors (indoor and outdoor corridors, walkways)
• Retail space floors (store entrances, outdoor dining areas)
• Park landscape pathways (pedestrian pathways in parks and scenic areas)
• Pool surrounds (high slip-resistance areas around swimming pools)
• Commercial outdoor platforms (cafe and restaurant outdoor areas)
• Industrial and warehouse flooring (applications requiring high fire resistance and corrosion resistance)

Frequently Asked Questions

Q1: What are the differences between aluminum alloy flooring and wood-plastic composite (WPC) flooring?
Aluminum alloy flooring uses a metal substrate that does not absorb water, does not rot, and resists insect infestation, providing longer service life. Fire rating is Class A (non-combustible), higher than WPC’s Class B (difficult to ignite). Load-bearing and compression resistance are higher, suitable for high-traffic and heavy-load applications. Surface temperature under summer sunlight is slightly higher than WPC.

Q2: How is the flooring installed?
Installation is similar to wood-plastic flooring. Install joists (aluminum or galvanized steel) first, with recommended joist spacing not exceeding 400mm. Secure flooring boards to joists using clip-in joints or screws. Reserve 3-5mm gaps between boards for drainage and thermal expansion.

Q3: Does the aluminum flooring surface become too hot under summer sunlight?
Aluminum has higher thermal conductivity, resulting in higher surface temperatures than wood-plastic or wood flooring under direct sunlight. Select lighter colors for high-sun areas or provide shading. For barefoot traffic, consider product series with thermal insulation layers or wood-plastic composite caps.

Q4: Does the product surface rust?
Aluminum alloy substrate does not rust. The coated surface (anodized or fluorocarbon) provides additional protection against salt-spray and chemical corrosion. If the coating is damaged, exposed aluminum forms a protective oxide layer and does not produce red rust.

Q5: How is the flooring cleaned and maintained?
Routine cleaning uses sweeping or water rinsing. For stubborn stains, use a neutral cleaner with a soft brush. Avoid steel wool pads or acid/alkaline cleaners to prevent coating damage. No painting, waxing, or sealing is required.

Q6: Can the product be used in coastal areas (high salt-spray environments)?
Yes. Aluminum alloy substrate provides inherent salt-spray resistance, and the fluorocarbon coating further enhances corrosion protection. Use stainless steel hardware and aluminum joists for a fully corrosion-resistant system. Suitable for beachfront villas, marinas, and similar applications.

Precautions

• Verify that joists are level and secure before installation; Joist spacing not exceeding 400mm. Aluminum flooring is heavier than wood-plastic flooring; Joists must have adequate load-bearing capacity
• Storage requirements: Store flat on dry, level ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation or coating scratches
• Use aluminum-specific saw blades (tooth spacing ≤ 3mm, negative rake angle) when cutting; Wear safety goggles, hearing protection, and gloves. Apply edge trim or color-matched paint to cut edges to prevent scratches
• Recommended installation ambient temperature: 5°C to 35°C. Aluminum has high thermal conductivity; Take care to prevent slipping during low-temperature installation
• Pre-drill holes when using screws; Use stainless steel self-tapping screws to prevent galvanic corrosion
• Reserve 3-5mm gaps between boards for thermal expansion (aluminum has higher coefficient of thermal expansion than wood-plastic)
• Inspect color consistency across multiple batches before large-scale installation
• Avoid cleaning with strong acids, strong alkalis, or organic solvents that may damage the surface coating
• Handle carefully during transport to prevent deformation or coating damage from impacts
• Board surface temperature may rise under summer sunlight exposure; Take protective measures during installation and maintenance to prevent burns
• The ground surface below the flooring should have a drainage slope (minimum 1% recommended) to prevent prolonged water accumulation
• Avoid heavy scratching of the coating with hard objects during installation and use to prevent coating damage