219*26mm Great Wall PE Wood-Plastic Composite Flooring (Generation 1)

Key Advantages

• 219×26mm dimensions with Great Wall-shaped profile providing three-dimensional visual effect
• PE wood-plastic co-extrusion process integrates capstock and core in one pass for material consistency
• Weather and UV resistance: UV-stabilized formulation resists fading and cracking under prolonged sunlight exposure
• Water and moisture resistance: Low water absorption with no swelling or deformation after rain exposure
• Corrosion and insect resistance: PE wood-plastic material resists rot and insect infestation
• Clip-in joint design: Easy installation with uniform joint spacing
• Natural texture: Wood grain finish provides visual appearance similar to natural wood

Product Features

Application Scenarios

• Courtyard exterior wall cladding (outdoor wall covering for villas and residences)
• Villa fences (outdoor fence paneling)
• Balcony railings (balcony guardrail decoration or screening)
• Landscape features (outdoor feature walls, planter borders, boardwalk railings)
• Outdoor curtain wall cladding (commercial building exterior wall decoration)
• Outdoor pavilions and pergola cladding panels

Frequently Asked Questions

Q1: What are the differences between PE wood-plastic Great Wall panels and natural wood?
PE wood-plastic material does not absorb water, does not rot, and resists insect infestation, providing longer outdoor service life than untreated natural wood. No periodic painting or sealing is required for maintenance. Routine cleaning requires only water rinsing.

Q2: How are the panels installed?
Install using the clip-in joint system, with adjacent panels connected via interlocking clips. Install a supporting framework (wood or metal square tubes) on the substrate. Use stainless steel or galvanized screws to secure panels to the framework. Countersink screw heads below the panel surface or use matching caps.

Q3: Will the product fade after long-term outdoor use?
The material is formulated with UV stabilizers, resulting in slower fading than standard wood-plastic products without UV additives. Under normal outdoor sunlight exposure, color change remains within a controlled range. The actual fading level depends on sunlight intensity and duration of exposure.

Q4: Can the product be used for ground installation (e.G., Outdoor decking)?
This 219×26mm Great Wall panel is primarily designed for wall, fence, and curtain wall cladding applications. For ground installation, select specialized outdoor decking products with different thickness and flexural strength requirements.

Q5: Does the panel surface require protective coating?
No. The PE wood-plastic material is formulated with UV and anti-aging additives during production, eliminating the need for additional protective coating. For color changes, specialized wood-plastic coatings are available but will increase maintenance requirements.

Q6: How are the panels cleaned and maintained?
Routine cleaning uses water rinsing or damp cloth wiping. For stubborn stains, use a neutral cleaner with a soft brush. Avoid steel wool pads or high-pressure water jets at close range.

Precautions

• Verify that the supporting framework is level and secure before installation; Recommended framework spacing does not exceed 400mm
• Storage requirements: Store flat on dry, level ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) or specialized wood-plastic saw blades when cutting; Wear safety goggles and dust masks. Cut edges require no sealing
• Recommended installation ambient temperature: 5°C to 35°C. PE wood-plastic material flexibility decreases at low temperatures; Take care when cutting
• Pre-drill holes when using screws to prevent panel cracking. Use stainless steel or galvanized screws to prevent rust
• Ensure clips are fully engaged during installation for uniform joint alignment. Check for loose clips after installation
• Inspect color consistency across multiple batches before installation; Color variations may exist between PE wood-plastic batches
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport to prevent edge and corner damage
• Panel surface temperature may exceed 60°C under summer sunlight exposure; Take protective measures during installation and maintenance