160*20mm Fence PE Wood-Plastic Composite Flooring (Generation 1)

Key Advantages

• 160×20mm dimensions with regular linear profile, suitable for fence and railing panels
• High-density PE wood-plastic material balancing flexibility and hardness with good impact resistance
• Outdoor-specific weather-resistant formulation: UV-resistant and rain-resistant with no fading or cracking under prolonged outdoor use
• Corrosion and mold resistance: Non-absorbent, non-rotting, no mold growth
• No painting or maintenance required: No periodic protective coating needed; Rinse with water for cleaning
• Safe and environmentally friendly: No splinters, no cracks, with regular edges
• Easy installation: Clip or screw fixing, compatible with metal or wooden posts

Product Features

Application Scenarios

• Courtyard partitions (residential yard space division)
• Garden fences (perimeter fencing for gardens)
• Residential landscape railings (green area railings in residential complexes)
• Hostel outdoor screening (courtyard and terrace screening for hostels)
• Deck railings (edge railings for outdoor decks)
• Boardwalk railings (side railings for park and scenic area boardwalks)
• Commercial outdoor fencing (restaurant outdoor dining areas, cafe terrace railings)

Frequently Asked Questions

Q1: What are the differences between PE wood-plastic fence panels and wooden fence panels?
PE wood-plastic material does not absorb water, does not rot, does not crack, does not support mold growth, and resists insect infestation, providing longer outdoor service life than untreated wood. No annual painting or sealing is required for maintenance. Routine cleaning requires only water rinsing. The material has no splinters and has regular edges, eliminating the need to sort or reject defective boards during installation.

Q2: How are the panels installed?
Install posts first (steel tubes, wood posts, or specialized wood-plastic posts) with recommended post spacing not exceeding 180cm. Secure fence panels horizontally or vertically between posts using stainless steel or galvanized screws. For horizontal installation, secure both ends of each panel to the posts. For vertical installation, install top and bottom rails.

Q3: Will the product fade after long-term outdoor use?
The material is formulated with UV stabilizers, resulting in slow fading. Under normal outdoor sunlight exposure, color change remains within a controlled range. Lighter colors show less noticeable fading than darker colors. The actual fading level depends on sunlight intensity and duration of exposure.

Q4: Can the product be used in coastal areas (high salt-spray environments)?
Yes. PE wood-plastic material is not sensitive to salt-spray corrosion and is more suitable for coastal environments than metal or untreated wood. Use stainless steel or aluminum alloy posts and hardware to prevent rusting of standard steel components.

Q5: Does the panel surface require painting?
No. The PE wood-plastic material is formulated with UV and anti-aging additives during production, eliminating the need for additional protective coating. For color changes, specialized wood-plastic coatings are available.

Q6: How are the panels cleaned and maintained?
Routine cleaning uses water rinsing or damp cloth wiping. For stubborn stains, use a neutral cleaner with a soft brush. Avoid steel wool pads or high-pressure water jets at close range to prevent surface texture damage.

Precautions

• Verify that posts are securely anchored and vertical; Post verticality deviation should not exceed 3mm per meter
• Storage requirements: Store flat on dry, level ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation
• Use fine-tooth saw blades (tooth spacing ≤ 3mm) or specialized wood-plastic saw blades when cutting; Wear safety goggles and dust masks
• Recommended installation ambient temperature: 5°C to 35°C. PE wood-plastic material flexibility decreases at low temperatures; Take care to prevent cracking when cutting
• Pre-drill holes (drill bit diameter slightly smaller than screw diameter) when using screws to prevent panel cracking. Use stainless steel or galvanized screws
• Reserve 3-5mm expansion gaps between fence panels to accommodate thermal expansion and contraction
• Inspect color consistency across multiple batches before installation
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport to prevent edge and corner damage
• After outdoor installation, check all fasteners for tightness to prevent loosening
• Panel surface temperature may rise under summer sunlight exposure; Take protective measures during installation and maintenance