Diameter 60cm PU Ceiling Medallions

Key Advantages

• 60cm diameter, medium-large size suitable for main light fixture base decoration in living rooms, bedrooms, and similar spaces
• Circular shape with full, rounded profile and smooth lines, compatible with various interior styles
• Substantial material thickness and density for structural stability
• Adequate flexibility to resist cracking during installation and transport
• Water and moisture resistance: Non-absorbent, non-expanding; Suitable for various indoor environments
• Aging resistance: Formulated with anti-aging agents to resist deformation over long-term use
• Smooth surface: Dense finish for easy cleaning

Product Features

Application Scenarios

• Living room main light surround trim (base covering and decoration for pendant and flush-mount lights)
• Bedroom main light base decoration (ceiling fixture surround trim)
• Club ceiling decorative trim (lobby and private room main light surrounds)
• Hostel guest room light fixture decoration (ceiling fixture base trim)
• Hotel guest room main light base decoration
• European, light luxury, and modern interior styles

Frequently Asked Questions

Q1: Does the medallion have a pre-cut central lamp hole?
The product features a pre-cut central lamp hole designed for pendant and flush-mount light wire access. The hole diameter varies by specific design and is typically compatible with standard fixture conduit sizes. Verify that the hole size matches fixture installation requirements before purchasing.

Q2: How are the medallions installed?
Apply with specialized PU moulding adhesive or secure with screws. The substrate (ceiling gypsum board or wood panel) must be flat, dry, and free of grease. Apply adhesive evenly to the back of the medallion, press into place, ensuring full contact with the ceiling surface. For a 60cm diameter medallion, apply adhesive at multiple points around the perimeter and center. Use painter's tape or temporary supports for fixing until the adhesive is fully cured.

Q3: Can the product be used in humid environments (bathrooms or kitchens)?
Yes. PU material does not absorb water, does not support mold growth, and does not expand, making it suitable for ceiling decoration in humid environments such as bathrooms and kitchens. Seal the back and edges to prevent moisture penetration between the medallion and the ceiling.

Q4: Does the medallion require painting after installation?
The product comes pre-primed or with a white finish (depending on product series) and is ready to use after installation. For color changes (e.G., Gold, black, antique colors), the surface accepts water-based or polyurethane paints. When painting circular medallions, apply evenly to avoid paint accumulation in recessed pattern details.

Q5: What size light fixture is compatible with the 60cm diameter medallion?
This medallion is suitable for light fixtures with a base diameter not exceeding 45cm, such as living room main lights and bedroom flush-mount lights. The fixture base should be fully covered by the medallion; The fixture base diameter should be smaller than the medallion's central hole diameter or smaller than the overall diameter minus the edge width.

Q6: Can the medallion be cut?
The medallion is an integrally molded circular product and generally should not be cut. If outer diameter adjustment is necessary, use a fine-tooth saw blade (tooth spacing ≤ 3mm), though this will compromise the rounded edge profile and pattern integrity. It is recommended to purchase the correct size.

Precautions

• Verify that the ceiling surface is flat, dry, and free of grease before installation; Height difference ≤ 3mm when measured with a 2-meter straightedge within the medallion installation area
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation or pattern damage
• Before installation, check whether the central hole aligns with the fixture wire access point; Adjust ceiling cutout if necessary
• Recommended installation ambient temperature: 5°C to 35°C. Avoid low temperatures that may slow adhesive curing
• Apply adhesive evenly to the back of the medallion. For the 60cm diameter, use a combination of ring-shaped and radial adhesive strips. Press firmly to ensure full contact with the ceiling surface without hollow spots
• Use screws for additional fixing. Use stainless steel or galvanized screws to prevent rust contamination. Countersink screw heads below the medallion surface and cover with filler
• Inspect color and pattern consistency across multiple batches before installation
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport; Edges, surface patterns, and back reinforcement ribs are easily damaged. Avoid impacts
• If repainting, apply paint before installation for complete coverage of pattern details; Touch up screw holes and joint areas after installation
• Two-person handling is recommended for the 60cm diameter medallion during transport and installation to prevent deformation or breakage from single-person handling