2cm Wide Plain PU Mouldings & Cornices

Key Advantages

• 2cm face width: Narrow profile suitable for fine trim and thin-line decoration
• Plain smooth design without patterns; Blends well with various wall and ceiling surfaces
• Low-density PU material reduces weight per linear meter, simplifying cutting and installation
• Water and mold resistance: Non-absorbent, no mold growth; Suitable for kitchens, bathrooms, and other humid areas
• Dimensional stability: No swelling or shrinkage as seen in wood; No deformation or color fading
• Easy installation: Cuttable with a utility knife; No power tools required

Product Features

Application Scenarios

• Wall grid lines (vertical or horizontal division lines for wall patterns)
• Ceiling fine-edge trim (narrow transition line between ceiling edge and wall)
• Accent wall borders (frames, edging, and decorative lines for accent walls)
• Cabinet gap covers (covering gaps between cabinets and walls)
• Wall pattern divisions (division lines for wainscoting, upholstered panels, or painted walls)
• Door and window narrow-edge trim (fine trim around door frames and window frames)
• Baseboard top decorative line (narrow trim strip above baseboards)
• Modern minimalist, Nordic, and light luxury interior styles

Frequently Asked Questions

Q1: What decorative applications is the 2cm width suitable for?
The 2cm width is a narrow profile suitable for fine trim and thin-line division applications such as minimalist accent wall borders, wall grid lines, ceiling fine-edge trim, and covering gaps between cabinets and walls. It is not suitable for areas requiring broad coverage or heavy decorative profiles.

Q2: How are the mouldings installed?
Apply with specialized PU moulding adhesive or neutral mold-resistant construction adhesive. The substrate must be flat, dry, and free of grease. Apply adhesive evenly to the back of the moulding and press into place. For longer runs, add adhesive points every 30-40cm. Apply filler to butt joints and smooth with a damp cloth.

Q3: Can the product be used in humid environments (bathrooms, kitchens)?
Yes. PU material does not absorb water, does not develop mold, and does not deform, making it suitable for high-humidity environments. Seal the back and joints to prevent moisture penetration between the moulding and the wall.

Q4: How is the product cut? How are corners handled?
Cutting: Score the cutting line 3-5 times with a sharp utility knife and snap backward, or use a miter saw. For corners, use 45° miter cuts at both internal and external corners. Alternatively, use butt joints and fill the joint with filler.

Q5: Does the product require painting after installation?
The product comes pre-primed or with a white finish (depending on product series) and is ready to use after installation. For color changes, the surface accepts water-based or polyurethane paints. For 2cm narrow mouldings, use a small brush or spray gun to prevent paint buildup.

Q6: Can the product be bent for curved wall installations?
The 2cm narrow profile has some flexibility and can accommodate curved walls with larger radii (radius greater than 1 meter). For tighter radius curves, cut the moulding into shorter segments and install piece by piece, or select heat-bendable flexible PU moulding series.

Precautions

• Verify substrate flatness before installation: height difference ≤ 2mm when measured with a 2-meter straightedge. The 2cm narrow moulding is sensitive to substrate unevenness; Any irregularities will be visibly apparent
• Storage requirements: Store flat on dry ground with stack height not exceeding 1 meter; Avoid heavy pressure that may cause deformation
• Use a sharp utility knife when cutting; Wear protective gloves. Lightly sand uneven cut edges with fine sandpaper
• Recommended installation ambient temperature: 5°C to 35°C. Avoid low temperatures that may slow adhesive curing
• Apply adhesive evenly, avoiding excess that may overflow beyond the moulding edges (the 2cm width is narrow, and overflow is difficult to clean)
• For long runs exceeding 2 meters, plan segmented joints to reduce installation difficulty
• Joint treatment: Apply filler to butt joints, smooth with a damp cloth, and lightly sand with fine sandpaper after drying
• Inspect color consistency across multiple batches before large-scale installation
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Handle carefully during transport to prevent bending that may cause breakage
• For white wall applications, plain mouldings are typically white. For other colors, select paintable products and apply appropriate coating