Diameter 200cm PU Ceiling Medallions

Key Advantages

• 200cm diameter, extra-large size suitable for large-space ceiling centerpieces in villa halls, hotel lobbies, and similar spaces
• Dignified circular profile with smoothly rounded symmetrical arcs for visual completeness
• Reinforced material thickness and density for enhanced structural stability
• Deformation resistance: Maintains shape stability under large dimensions with no warping or sagging
• Moisture resistance: Non-absorbent, no mold growth; Suitable for large commercial and public environments
• Dimensional stability: No shrinkage, expansion, or cracking

Product Features

Application Scenarios

• Villa hall ceiling centerpiece (dome light recess decoration in double-height spaces)
• Hotel lobby ceiling decoration (large central fixture base and surrounding trim)
• Club showroom ceiling centerpiece (dome ceiling decoration for exhibition spaces)
• Large shopping mall atrium ceiling decoration (commercial space atrium ceiling features)
• Luxury restaurant private room dome ceiling decoration
• European, neoclassical, and luxury interior styles

Frequently Asked Questions

Q1: How is the 200cm diameter extra-large medallion transported and handled?
The product is integrally molded with a 200cm diameter. Use custom wooden crates or reinforced cardboard boxes with internal cushioning material. A minimum of four people are required for handling to prevent deformation or cracking from point loads. On-site lifting should use suction cups or specialized handling tools. Dragging or lifting from one side is prohibited.

Q2: How are the medallions installed?
Apply with specialized PU moulding adhesive combined with screw fixing. The substrate (ceiling gypsum board or wood panel) must be flat, dry, and free of grease, with reinforced load-bearing structure. Apply adhesive evenly to the back of the medallion, press into place, and secure with multiple stainless steel or galvanized screws at spacing not exceeding 30cm. For large medallions, apply adhesive and press in sections progressively.

Q3: Can the product be used in large-space double-height ceilings?
Yes. The 200cm diameter medallion is designed for large-space double-height ceilings. Before installation, ensure the ceiling substrate structure has sufficient load-bearing capacity. Reinforce the medallion installation area with additional framing or embedded steel plates as necessary.

Q4: Does the medallion have a pre-cut central lamp hole?
The product features a central lamp recess area designed for large pendant light and crystal chandelier wire access and mounting. The recess diameter and configuration vary by specific design. When installing large fixtures, the fixture mounting points must be fixed directly to the building's top structural slab, not supported solely by the medallion.

Q5: Does the medallion require painting after installation?
The product comes pre-primed or with a white finish (depending on product series) and is ready to use after installation. For color changes (e.G., Gold, silver, antique colors), the surface accepts water-based or polyurethane paints. For extra-large medallions, spray painting is recommended for even coverage.

Q6: Can the 200cm diameter medallion be installed in sections?
This product is integrally molded and requires no on-site assembly. For larger sizes or custom shapes, segmented mold tooling is available for sectional transport and on-site assembly. Consult the supplier for custom production details.

Precautions

• Verify that the ceiling substrate structure has adequate load-bearing capacity before installation. The combined weight of the large medallion and fixture must be supported by the building's top structural slab
• Storage requirements: Store flat on dry, level, hard ground with single-layer stacking (no stacking). No edge-on or side-on storage. Keep storage area away from direct sunlight and moisture
• Transport requirements: Use custom wooden crates or reinforced cardboard boxes with internal cushioning material. Keep flat during transport; Vertical or side transport is prohibited
• Before installation, check whether the central recess area aligns with the fixture mounting position
• Recommended installation ambient temperature: 5°C to 35°C. Avoid low temperatures that may slow adhesive curing
• Apply adhesive evenly across the entire back of the medallion (full coverage recommended). Press firmly to ensure full contact with the ceiling surface without hollow spots
• Screw fixing: Use stainless steel or galvanized screws at spacing not exceeding 30cm. Countersink screw heads below the medallion surface and cover with filler
• For large fixture installation, fixture mounting points must be independent of the medallion and fixed directly to the building's top structural slab
• Inspect color and pattern consistency across multiple batches before installation
• Avoid cleaning with strong acids, strong alkalis, or organic solvents
• Establish safety perimeter zones during on-site installation to prevent unauthorized access
• Handling and installation of extra-large medallions require professional installation teams with specialized handling and lifting equipment